• Don't forget to rate 1-5 stars! Check the support tab for any help or comments.

  • (2)
    « »

    Avatar PinUp Player Pack (BackGlass Only)

    System:  Visual Pinball Player (version 10.4+)


    All Video, Media and Artwork by Xkane47
    PuP-Pack Editor & PuPCapture files by Nailbuster
    Fan trailer by Imakefilmtrailers (youtube)

    Video preview:
    https://www.youtube.com/watch?v=1LCykrJ1whc

     

    Requirements:

     

    PinUP Player v1.20 or greater

    VPX:  Designed to work with Avatar mod 1.12

    ROM:  Designed to work with “avr_200”.  May work with other versions.

    DMD Colors:  R=255 G=88 B=32

     

    Installation:

     

    Ensure there are no files in your PUPVideos\avr_200 folder (if that folder already exists).

    Copy the PuP-Pack (avr_200) folder into your PUPVideos folder.

    (example: C:\Visual Pinball\Tables\PinUpPlayer\PUPVideos\avr_200).

     

    Background Videos:

     

    Backglass:  Enabled by default

    Topper   :  Disabled

    (note background settings are configurable by using PinUPPackEditor.exe)


    Installation Notes:

     

    The Backglass has a default setting to enable a looping Background Backglass video.  You can remove your existing Avatar.directb2s file as it is not needed. (and won’t be seen while using this PuP-Pack)

     

    This PuP-Pack is designed for people without Toppers.  There is a different PuP-Pack available for users with Toppers.  To ensure this PuP-Pack show videos properly you must ensure your “Other 1” screen in PinUp Player Displays is configured to match same size/location as your standard BackGlass.

    This PuP-Pack does not require a modded Visual Pinball table to work.  No table script modifications are required.  It should work with any Avatar vpx table that uses rom avr_200.  Tested with Avatar table mod 1.12.



    Troubleshooting:

    Visit:  

    http://vpinball.com/forums/forum/visual-pinball-forums/pinup-player-interactive-video-plugin/



    Installation:

     

    Ensure there are no files in your PUPVideosavr_200 folder (if that folder already exists).

    Copy the PuP-Pack (avr_200) folder into your PUPVideos folder.

    (example: C:Visual PinballTablesPinUpPlayerPUPVideosavr_200).

     

    Background Videos:

     

    Backglass:  Enabled by default

    Topper   :  Disabled

    (note background settings are configurable by using PinUPPackEditor.exe)


    Installation Notes:

     

    The Backglass has a default setting to enable a looping Background Backglass video.  You can remove your existing Avatar.directb2s file as it is not needed. (and won’t be seen while using this PuP-Pack)

     

    This PuP-Pack is designed for people without Toppers.  There is a different PuP-Pack available for users with Toppers.  To ensure this PuP-Pack show videos properly you must ensure your “Other 1” screen in PinUp Player Displays is configured to match same size/location as your standard BackGlass.

    This PuP-Pack does not require a modded Visual Pinball table to work.  No table script modifications are required.  It should work with any Avatar vpx table that uses rom avr_200.  Tested with Avatar table mod 1.12.



    Troubleshooting:

    Visit:  

    http://vpinball.com/forums/forum/visual-pinball-forums/pinup-player-interactive-video-plugin/



    This topic contains 21 replies, has 9 voices, and was last updated by  Johngreve 1 week ago.

    Viewing 20 posts - 1 through 20 (of 22 total)
    • Author
      Posts
    • #74083
       NailBuster 
      Moderator
      ModeratorMember

      http://vpinball.com/?post_type=cmdm_page&p=74080

      Avatar PinUp Player Pack (BackGlass Only)

      System:  Visual Pinball Player (version 10.4+)

      All Video, Media and Artwork by Xkane47
      PuP-Pack Editor & PuPCapture files by Nailbuster
      Fan trailer by Imakefilmtrailers (youtube)

      Video preview:
      https://www.youtube.com/watch?v=1LCykrJ1whc

       

      Requirements:

       

      PinUP Player v1.20 or greater

      VPX:  Designed to work with Avatar mod 1.12

      ROM:  Designed to work with “avr_200”.  May work with other versions.

      DMD Colors:  R=255 G=88 B=32

       

      Installation:

       

      Ensure there are no files in your PUPVideosavr_200 folder (if that folder already exists).

      Copy the PuP-Pack (avr_200) folder into your PUPVideos folder.

      (example: C:Visual PinballTablesPinUpPlayerPUPVideosavr_200).

       

      Background Videos:

       

      Backglass:  Enabled by default

      Topper   :  Disabled

      (note background settings are configurable by using PinUPPackEditor.exe)

      Installation Notes:

       

      The Backglass has a default setting to enable a looping Background Backglass video.  You can remove your existing Avatar.directb2s file as it is not needed. (and won’t be seen while using this PuP-Pack)

       

      This PuP-Pack is designed for people without Toppers.  There is a different PuP-Pack available for users with Toppers.  To ensure this PuP-Pack show videos properly you must ensure your “Other 1” screen in PinUp Player Displays is configured to match same size/location as your standard BackGlass.

      This PuP-Pack does not require a modded Visual Pinball table to work.  No table script modifications are required.  It should work with any Avatar vpx table that uses rom avr_200.  Tested with Avatar table mod 1.12.

      Troubleshooting:

      Visit:  

      http://vpinball.com/forums/forum/visual-pinball-forums/pinup-player-interactive-video-plugin/


      Some users who have liked this topic:

      • avatar
      • avatar
      1 user thanked author for this post.
      #74098
       Thalamus 
      Participant
      ContributorMember

      Requirements: PinUP Player v1.20 or greater

      Download link ?

       

      #74111
       senseless 
      Participant
      Member

      Love to see this baby in action. Downloaded the latest beta of the player but running the table does not trigger the player. Tests confirm everything is working. Am I missing anything? Tried with avr_200 rom.

      PS Tron PuP version works fine.

      • This reply was modified 1 week, 2 days ago by  senseless.

      Some users who have liked this topic:

      • avatar
      #74113
       doogie 
      Participant

      Perfect, another Future Pinball table removed from my cab, thanks!

      #74145
       The Loafer 
      Participant
      Member

      You’ve done a great job with this.  I know while we are playing the player can’t always see the back glass as we are so focused on the gameplay si I had my wife test it out so that I could see it and job superbly executed sir!  One thing that immediately impressed me was the level of polish to everything, well done!  Best compliment I can give you is my wife, who is rarely impressed with anything visual pinball related said “Wow” a couple of times. High praise!


      Some users who have liked this topic:

      • avatar
      • avatar
      #74154
       NailBuster 
      Moderator
      ModeratorMember

      Love to see this baby in action. Downloaded the latest beta of the player but running the table does not trigger the player. Tests confirm everything is working. Am I missing anything? Tried with avr_200 rom. PS Tron PuP version works fine.

      Ensure you’re using the new release:  http://vpinball.com/forums/topic/pinup-player-new-version-1-2-released/


      Some users who have liked this topic:

      • avatar
      • avatar
      1 user thanked author for this post.
      #74183
       Matt Bini 
      Participant

      Great Stuff, Thanks Very much! :good:

      #74184
       Matt Bini 
      Participant

      Love to see this baby in action. Downloaded the latest beta of the player but running the table does not trigger the player. Tests confirm everything is working. Am I missing anything? Tried with avr_200 rom. PS Tron PuP version works fine.

      Hi Sensless, I had this hicup too, I didnt have the up to date dmd files from freezy you need the latest version of them too, I think there is a link in one of the readme files. I also found that the new pinup install reset my dmd position and the config file in my syswow64 needed deleting as there was a new duplicate one made in vpinmame. Hope this info helps get you back on track. It is worth it for such a great addition to the table. :good:


      Some users who have liked this topic:

      • avatar
      #74224
       Thalamus 
      Participant
      ContributorMember

      Great work @nailbuster, @MisterKai and @terryred. This avatar is just gorgeous, and Tron is not far behind either.  B-)

      I’m not sure I’ll install it to my cab just yet though. I probably should invest in a extra hard-drive and GPU first. But, thank you for showing the way for the rest of us !

      • This reply was modified 1 week, 2 days ago by  Thalamus.

      Some users who have liked this topic:

      • avatar
      #74232
       NailBuster 
      Moderator
      ModeratorMember

      thanks…. don’t forget….Avatar looks this gorgeous because of all the artwork and graphic work by xkane47!!!  He did a great job!


      Some users who have liked this topic:

      • avatar
      • avatar
      #74242
       The Loafer 
      Participant
      Member

      :thumbs up to xkane47!


      Some users who have liked this topic:

      • avatar
      #74269
       TerryRed 
      Participant
      MemberContributor

      Looks beautiful. Job well done to both xKane47 and NailBuster!

      Makes me want to do the FP version now.

      #74274
       jbg4208 
      Participant
      Member

      For some reason I cannot get this to work. Having he same problem as Senseless. Though tron will not work either. Table plays fine just no videos. I have the 1.6 version of Freezys dll and dmdext all in the VpinMAME folder. Removed the color rom check. Pinupplayer installed via the latest installer, screens setup while installing. Videos downloaded and placed in the c:\Visual Pinball\Tables\PinUpPlayer\PUPVideos\avr_200. Attached the puplog.txt if anyone needs to see it.

      I’ve missed something somewhere.  Anyone have any ideas?  :wacko:   :scratch:

      Attachments:
      #74276
       TerryRed 
      Participant
      MemberContributor

      For some reason I cannot get this to work. Having he same problem as Senseless. Though tron will not work either. Table plays fine just no videos. I have the 1.6 version of Freezys dll and dmdext all in the VpinMAME folder. Removed the color rom check. Pinupplayer installed via the latest installer, screens setup while installing. Videos downloaded and placed in the c:\Visual Pinball\Tables\PinUpPlayer\PUPVideos\avr_200. Attached the puplog.txt if anyone needs to see it. I’ve missed something somewhere. Anyone have any ideas? :wacko: :scratch:

       

      Are you guys installing PuP AFTER you have installed dmdext 1.6?  (That’s what you need to do)

      PuP installs a newer updated 1.6 dmddevice.dll (made for pupcapture) to VPinMAME and replaces Freezy’s original 1.6 dmddevice.dll.

      Make sure there are no dmdext files anywhere except for VPinMame.  (not in syswow64,system32,etc)

      You need to have “use external dll” enabled for this table’s settings in VPinMame for PuPCapture to work.

      Make sure your DMD colour in PinMAME settings for this rom avr_200 are the default orange.  (for Tron is the blue settings I noted)

       

      Are you running this table from your Tables directory? If not then that can possibly cause PuP to not run (B2S issues).

      #74283
       Thalamus 
      Participant
      ContributorMember

      Oh. I’m sorry. I screwed up the names. Of course I wanted to mention xkane47 !!! :yes:   I love especially the “standard” DMD. :good:

      #74302
       jbg4208 
      Participant
      Member

      Are you guys installing PuP AFTER you have installed dmdext 1.6? (That’s what you need to do) PuP installs a newer updated 1.6 dmddevice.dll (made for pupcapture) to VPinMAME and replaces Freezy’s original 1.6 dmddevice.dll.  – Yes, Installed freezy’s 1.6 first.

      Make sure there are no dmdext files anywhere except for VPinMame. (not in syswow64,system32,etc) – There are none, Have check multiple time and also did a system search. Only dmdext that is found is in Pinmame folder and the backup in pupbackup.

      You need to have “use external dll” enabled for this table’s settings in VPinMame for PuPCapture to work. Make sure your DMD colour in PinMAME settings for this rom avr_200 are the default orange. (for Tron is the blue settings I noted) – Yes doing this also. 

      Are you running this table from your Tables directory? If not then that can possibly cause PuP to not run (B2S issues). – from vpinball. clicking file and open.

       

      Also have the PUPcapture folder with pics of the dmd in it.

       

       

      • This reply was modified 1 week, 1 day ago by  jbg4208.
      #74306
       TerryRed 
      Participant
      MemberContributor

      Are you guys installing PuP AFTER you have installed dmdext 1.6? (That’s what you need to do) PuP installs a newer updated 1.6 dmddevice.dll (made for pupcapture) to VPinMAME and replaces Freezy’s original 1.6 dmddevice.dll. – Yes, Installed freezy’s 1.6 first. Make sure there are no dmdext files anywhere except for VPinMame. (not in syswow64,system32,etc) – There are non, Have check multiple time and also did a system search. Only dmdext that is found is in Pinmame folder and the backup in pupbackup. You need to have “use external dll” enabled for this table’s settings in VPinMame for PuPCapture to work. Make sure your DMD colour in PinMAME settings for this rom avr_200 are the default orange. (for Tron is the blue settings I noted) – Yes doing this also. Are you running this table from your Tables directory? If not then that can possibly cause PuP to not run (B2S issues). – from vpinball. clicking file and open.

      Do you have your PuP tables in “Visual Pinball \ Tables”?   I ask because I find that PuPCapture videos won’t work unless I run my PuP tables from “Visual Pinball \ Tables” (where my B2S server and its settings files are). The table needs to be in the same directory of B2S server settings files. (normally in your VPX Tables folder). Not in a sub folder of Tables,etc…

      #74307
       jbg4208 
      Participant
      Member

      Do you have your PuP tables in “Visual Pinball \ Tables”? I ask because I find that PuPCapture videos won’t work unless I run my PuP tables from “Visual Pinball \ Tables” (where my B2S server and its settings files are). The table needs to be in the same directory of B2S server settings files. (normally in your VPX Tables folder). Not in a sub folder of Tables,etc…

      Yep sure do. Here is a question about the installer though. It asks for the location of the b2s plugin folder. Defaulted to vpinball\tables. Is that correct?

      #74390
       jbg4208 
      Participant
      Member

      Got it figured out from another thread, needed to activate plugins on my b2s settings.  Working great now! Must have over looked that in the readme.

      • This reply was modified 1 week, 1 day ago by  jbg4208.

      Some users who have liked this topic:

      • avatar
      #74429
       Johngreve 
      Participant
      Member

      Silly question…..where can I find this table Avatar Mod 1.12? I have only been able to find 1.05 over at VPU. I understand that this pack requires the avr200 ROM which the table 1.05 uses so perhaps that table will work as well?

    Viewing 20 posts - 1 through 20 (of 22 total)

    You must be logged in to reply to this topic.

  • You have no permission to download this file.

  • ©2018 VPinBall.com

    Facebook Auto Publish Powered By : XYZScripts.com

    Log in with your credentials

    or    

    Forgot your details?

    Create Account