• Don't forget to rate 1-5 stars! Check the support tab for any help or comments.

  • (3)
    « »

    You have the power of the ultimate light show in a pinball cabinet! This is the first Future Pinball table to use addressable leds thanks to the new DOF led MX support in DOFLinx 5.20!
     
    You have never seen a light show quite like this in a pinball cabinet! Amazing effects and animation that surround the playfield!
     
    A video demonstration can be seen here in my cabinet:

    https://www.youtube.com/watch?v=b62481X_edk

     

    This table has the complete cabinet feedback and lighting support for the following:
     
    - 10 solenoids for flipper, slingshots, bumpers, etc..
    - 5 RGB flashers
    - Blower Fan
    - Shaker
    - Gear motor
    - Strobe
    - Beacon
    - Start button
    - Coin button
    - Launch Ball button
    - RGB Undercab Lighting
    - Addressable Leds

     


    Requirements:
     
    - DOF R3 installed (for DOFLinx cabinet feedback and lighting) and addressable leds already setup and working (for MX led effects).
    - DOFlinx 5.20 or higher is REQUIRED, even if you don't have addressable leds.
    - addressable leds are NOT required to play this table, but they are HIGHLY recommended.
    - to use the addressable leds with this table you must have your DOF "config" files updated by using DOF Config Tool! (just like you would for Visual Pinball)
     
     
    To play a Future Pinball table with addressable leds support (DOFLinx MX):
     
    - update DOFLinx as per normal (must be 5.20 or higher). Make sure you copy over the new DOFLinx.vbs to "Future Pinball Scripts". 
    - add DIRECTOUTPUTGLOBAL=c:DirectOuputConfigGLobalConfig_b2sServer.xml   (assuming you have it there)  to your DOFLinx.ini file.
    - download the awesomeness of a Future Pinball DOFLinx MX table
    - check DOF Config Tool to see if support for that table has been added to it yet  (you will see FP tables start with "FP:") If there are no DOF commands showing for that table, its not supported yet.
    - "Generate" a new Config File (containing directoutputconfig30.ini in the zip)  and copy the new files to your "DirectOutput Configs"  folder.
    - play the epicness that is Future Pinball with DOFLinx cabinet feedback and addressable leds!
     
     
    DOFLinx 5.20+ download link:
     
    http://www.vpforums....&showfile=12318

    DOFLinx MX update:

    - added awesome addressable led effects and animation

     

    This topic contains 3 replies, has 3 voices, and was last updated by  TerryRed 1 month, 3 weeks ago.

    Viewing 4 posts - 1 through 4 (of 4 total)
    • Author
      Posts
    • #64553
       TerryRed 
      Participant
      MemberContributor

      http://vpinball.com/?post_type=cmdm_page&p=64550

      You have the power of the ultimate light show in a pinball cabinet! This is the first Future Pinball table to use addressable leds thanks to the new DOF led MX support in DOFLinx 5.20!
       
      You have never seen a light show quite like this in a pinball cabinet! Amazing effects and animation that surround the playfield!
       
      A video demonstration can be seen here in my cabinet:

       

      This table has the complete cabinet feedback and lighting support for the following:
       
      – 10 solenoids for flipper, slingshots, bumpers, etc..
      – 5 RGB flashers
      – Blower Fan
      – Shaker
      – Gear motor
      – Strobe
      – Beacon
      – Start button
      – Coin button
      – Launch Ball button
      – RGB Undercab Lighting
      – Addressable Leds

       


      Some users who have liked this topic:

      • avatar
      • avatar
      • avatar
      • avatar
      1 user thanked author for this post.
      #64555
       randr 
      Keymaster
      ModeratorMember

      Very cool Terry! I am letting hauntfreaks approve the next download and this is the next one so let’s see how it goes. @hauntfreaks


      Some users who have liked this topic:

      • avatar
      #64870
       kakoufr 
      Participant

      Thanks TerryRed. Today I test DOFLinx MX. Work OK (and it’s amazing :)) with PFX2 and FP (Wipeout table). But with this table, I have an error:
      Variable undefined : FP_ROM line 4179
      it corresponds to “fp_motu”
      Do I need a rom ? where to find/put it ?
      I need a special version of FP ?

      #64878
       TerryRed 
      Participant
      MemberContributor

      Thanks TerryRed. Today I test DOFLinx MX. Work OK (and it’s amazing :)) with PFX2 and FP (Wipeout table). But with this table, I have an error: Variable undefined : FP_ROM line 4179 it corresponds to “fp_motu” Do I need a rom ? where to find/put it ? I need a special version of FP ?

      You downloaded   DOFLinx 5.20 and installed ALL files to where they belong?

      You have the newest DOFLinx.vbs copied to your “Future Pinball \ Scripts”   folder?

      You have the following in your DOFLinx.ini?

       

      ######PINBALL FX 2 Specific SETTINGS ############

      PATH_FX2=c:\DirectOutput\FX2\

      PATH_FX2_B2S=c:\DirectOutput\FX2_B2S\

      PATH_B2S_SERVER=c:\Visual Pinball\Tables\

      ####MX Specific Settings ####

      DIRECTOUTPUTGLOBAL=C:\DirectOutput\config\GlobalConfig_b2SServer.xml

      AUTO_MX=1

       

       

      What version of Future Pinball.exe  are you using?

      The only versions that work correctly it seems are the original EXE from the FP installer, or SLAMT1LT’s 2.7 exe.  Any other version that is patched to use greater than 2 GIG  (Zed 64bit version, or other 4 gig patched versions) seems to cause issues.

      Are you using BAM?

      Are you running DOFLinx.exe, Future Pinball.exe and FPLoader.exe (BAM)  as Admin?

      Also try turning on DOFLinx’s Debug=1    in DOFLinx.ini, and see if that helps. It helped a couple of people for some reason. For others switching to DEBUG=0 also worked.

       

      There are no “roms”.  DOFLinx uses a “rom name” (which is declared in the table script) so it knows what configuration to use from the directoutputconfig30.ini    file.

       

      There’s a bit of a discussion here about it that may help….

      http://www.vpforums.org/index.php?showtopic=38754

      • This reply was modified 1 month, 3 weeks ago by  TerryRed.
      • This reply was modified 1 month, 3 weeks ago by  TerryRed.
    Viewing 4 posts - 1 through 4 (of 4 total)

    You must be logged in to reply to this topic.

  • You have no permission to download this file.

  • ©2017 VPinBall.com

    Facebook Auto Publish Powered By : XYZScripts.com

    Log in with your credentials

    or    

    Forgot your details?

    Create Account