• Don't forget to rate 1-5 stars! Check the support tab for any help or comments.

  • (5)
    « »

    This is now the Maximum amount of cool that you can get from a Tron Legacy PuP-Pack! The MAX PACK!

    A video preview of all the VPX Tron Legacy PuP-Packs can be seen here:

    https://www.youtube.com/watch?v=vfgPrgyTH1s&t

     

    The Max Pack: PuP Backglass, PuP Topper, and real DMD or virtual DMD on their own screens.

    This is by far the best looking Tron Legacy PuP-Pack of all the versions I have created.

    This version is for anyone who has a real DMD or an LCD DMD screen. Or a "square" screen that has enough space for a Backglass and DMD. (Topper is optional).

    This has a brand new "framed" backglass with animated lens flares and colour changing neon effects to match the neon ramps and the gamemodes of the table. It also has other animations and new Topper videos. It makes the older PuP-Pack look very boring and simple by comparison.

    I have included 2 versions of the Max Pack:

    "Topper" version for those who have a Topper screen / space that is 21:9

    "Under" version for those who have an "Under" screen / space that is wider than 21:9.

    This PuP-Pack uses: 2 PuP Backglass video layers, 2 PuP Topper video layers.

     

    Requirements: IMPORTANT!

    PinUP System FULLY installed (which contains PinUP PlayerP 1.3+, PuPB2S driver, PuPCapture files which are "PuP updated" DMDext 1.6 files).

    PuPCapture MUST be working for these new PuP-Packs!!!

    You CANNOT use any older version of PinUP Player as it won't work correctly! Must be 1.3 or higher!

    Also...you CANNOT use ANY PuP modded tables with this PuP-Pack!

    DO NOT use the "Tron Legacy PuP-Edition" or the "Tron Legacy PuP-Pack Edition" tables (or any table based on those!)

    You can however use this with any normal version of Tron Legacy LE VPX.

    You also MUST NOT have a directb2s running at all, or it will obscure the PuP Backglass!!!

    Simply make sure you have a copy of your favorite Tron table (intended only for use with this PuP-Pack), and make sure it is named VERY differently to your directb2s file, so when you launch that Tron table it won't launch the directb2s!

    Also, you will need to have your DMD colours set to the default orange. While other colours may seem to work fine...there may possibly be some images that won't match close enough in PuPCapture to properly trigger or stop videos.

     

    For PuPCapture to work correctly:  you will need to have your DMD colour for this table (in VPinMAME) set to:

    Red: 255

    Green: 88

    Blue: 32

    Colorize: Disabled

    Use External DMD (DLL): Enabled

     

    Your DMD must be in English for all PuPCapture video triggers to work correctly!

     

    System:  Visual Pinball X (version 10.5+)

    PuP-Pack: All Video, Media and Artwork by TerryRed. PuP-Pack Editor & PuPCapture files by TerryRed

     

    Installation:

    Ensure there are no files in your "PUPVideos   trn_174h" folder (if that folder already exists).

    Copy the PuP-Pack "trn_174h" folder from the archive into your PUPVideos folder.

     

    Topper (Optional):

    If you do not have a Topper screen / space, you do not need to use the PuP Topper if you don't want to. You can disable the Topper just for this table by using the PinUPPackEditor. Disable the Topper Screen 1 (screen 0) and Topper Screen 2 (screen 8) and save the PuP-Pack.

    For PuPCapture to work correctly:  you will need to have your DMD colour for this table (in VPinMAME) set to:

    Red: 255

    Green: 88

    Blue: 32

    Colorize: Disabled

    Use External DMD (dll): Enabled

     

    Your DMD must be in English for all PuPCapture video triggers to work correctly!

     

    Installation:

    Ensure there are no files in your "PUPVideos   trn_174h" folder (if that folder already exists).

    Copy the PuP-Pack (trn_174h) folder from the archive into your PUPVideos folder.

    Topper (Optional):

    If you do not have a Topper screen, you do not need to use the PuP Topper if you don't want to. You can disable the Topper just for this table by using the PinUPPackEditor. Disable the Topper Screen 1 (screen 0) and Topper Screen 2 (screen 8) and save the PuP-Pack.

    Max Pack

    V1.1

    - removed pupinit.bat file, as it may have been blocked for some users and cause a pop-up when playing. This file was only used as a way to try to keep VPX in focus after PuP was initialized. Not normally needed.

    - changed Other1 (Backglass2) and Other2 (Topper2) in PuP-Pack to use a "CustomPos" setting. This will make sure that both of these additional PuP Screen video layers will use the normal Backglass and Topper screens as a reference for size and position. This is just in case the user's Default Backglass 2 and Topper 2 screen settings weren't setup correctly...or are being used for other purposes.

    This topic contains 13 replies, has 7 voices, and was last updated by  Mark70 1 month, 2 weeks ago.

    Viewing 14 posts - 1 through 14 (of 14 total)
    • Author
      Posts
    • #83079
       TerryRed 
      Moderator
      MemberContributorModerator

      This is now the Maximum amount of cool that you can get from a Tron Legacy PuP-Pack! The MAX PACK!

      A video preview of all the VPX Tron Legacy PuP-Packs can be seen here:

      https://www.youtube.com/watch?v=vfgPrgyTH1s&t

       

      The Max Pack: PuP Backglass, PuP Topper, and real DMD or virtual DMD on their own screens.

      This is by far the best looking Tron Legacy PuP-Pack of all the versions I have created.

      This version is for anyone who has a real DMD or an LCD DMD screen. Or a "square" screen that has enough space for a Backglass and DMD. (Topper is optional).

      This has a brand new "framed" backglass with animated lens flares and colour changing neon effects to match the neon ramps and the gamemodes of the table. It also has other animations and new Topper videos. It makes the older PuP-Pack look very boring and simple by comparison.

      I have included 2 versions of the Max Pack:

      "Topper" version for those who have a Topper screen / space that is 21:9

      "Under" version for those who have an "Under" screen / space that is wider than 21:9.

      This PuP-Pack uses: 2 PuP Backglass video layers, 2 PuP Topper video layers.

       

      Requirements: IMPORTANT!

      PinUP System FULLY installed (which contains PinUP PlayerP 1.3+, PuPB2S driver, PuPCapture files which are "PuP updated" DMDext 1.6 files).

      PuPCapture MUST be working for these new PuP-Packs!!!

      You CANNOT use any older version of PinUP Player as it won't work correctly! Must be 1.3 or higher!

      Also...you CANNOT use ANY PuP modded tables with this PuP-Pack!

      DO NOT use the "Tron Legacy PuP-Edition" or the "Tron Legacy PuP-Pack Edition" tables (or any table based on those!)

      You can however use this with any normal version of Tron Legacy LE VPX.

      You also MUST NOT have a directb2s running at all, or it will obscure the PuP Backglass!!!

      Simply make sure you have a copy of your favorite Tron table (intended only for use with this PuP-Pack), and make sure it is named VERY differently to your directb2s file, so when you launch that Tron table it won't launch the directb2s!

      Also, you will need to have your DMD colours set to the default orange. While other colours may seem to work fine...there may possibly be some images that won't match close enough in PuPCapture to properly trigger or stop videos.

       

      For PuPCapture to work correctly:  you will need to have your DMD colour for this table (in VPinMAME) set to:

      Red: 255

      Green: 88

      Blue: 32

      Colorize: Disabled

      Use External DMD (DLL): Enabled

       

      Your DMD must be in English for all PuPCapture video triggers to work correctly!

       

      System:  Visual Pinball X (version 10.5+)

      PuP-Pack: All Video, Media and Artwork by TerryRed. PuP-Pack Editor & PuPCapture files by TerryRed

       

      Installation:

      Ensure there are no files in your "PUPVideos   trn_174h" folder (if that folder already exists).

      Copy the PuP-Pack "trn_174h" folder from the archive into your PUPVideos folder.

       

      Topper (Optional):

      If you do not have a Topper screen / space, you do not need to use the PuP Topper if you don't want to. You can disable the Topper just for this table by using the PinUPPackEditor. Disable the Topper Screen 1 (screen 0) and Topper Screen 2 (screen 8) and save the PuP-Pack.


      Some users who have liked this topic:

      • avatar
      • avatar
      • avatar
      • avatar
      • avatar
      • avatar
      • avatar
      5 users thanked author for this post.
      #83091
       Psmiraglia 
      Participant

      nice job Terry! i do need to figure out why i get choppy video with pup though… :good:   :good:


      Some users who have liked this topic:

      • avatar
      • avatar
      1 user thanked author for this post.
      #83118
       Iain 
      Participant

      Hey Terry

       

      Awesome stuff, can’t decide yet on the Max Pack or the 2 in 1!

      You say to remove the backglass file, however when I do VPX then throws an exception looking for the file and saying its missing, how do I tell VPX or edit the table script to tell it to not try and load the B2S.Server file…

      I *am* still running 10.4 if thats a new change in 10.5 …not upgraded yet


      Some users who have liked this topic:

      • avatar
      #83119
       Iain 
      Participant

      Nevermind, spoke to soon! Found it. Right click on backglass and theres an option to turn off “error message if missing backglass”. Sorted!


      Some users who have liked this topic:

      • avatar
      #83121
       Iain 
      Participant

      Aaaand I’ve gone with the Max Pack!


      Some users who have liked this topic:

      • avatar
      #83122
       TerryRed 
      Moderator
      MemberContributorModerator

      If Windows Defender gives you issues with pininit.bat (included with the PuP-Pack)….

      Make sure it’s not blocked. If you must, create an exception in Windows Defender for the entire PinUPSystem folder or that file if you need to….or you can try removing the file. That file is only used to try to keep VPX in focus after the PuP-Pack is loaded.

      #83139
       Shadow 
      Participant

      Awesome work @terryred  :good:


      Some users who have liked this topic:

      • avatar
      #83141
       senseless 
      Participant
      Member

      To enjoy this super awesome PUP Pack from Terry make sure you have configured your screen 7 and 8! Screen 7 should be positioned on the backglass and Screen 8 should be on your topper.

      You can configure the PUP screens via the PinUpPlayerConfigDisplays.bat in your PinUPSystem directory.

      Man this is AWESOME!

       

       


      Some users who have liked this topic:

      • avatar
      1 user thanked author for this post.
      #83142
       TerryRed 
      Moderator
      MemberContributorModerator

      To enjoy this super awesome PUP Pack from Terry make sure you have configured your screen 7 and 8! Screen 7 should be positioned on the backglass and Screen 8 should be on your topper.

      You can configure the PUP screens via the PinUpPlayerConfigDisplays.bat in your PinUPSystem directory.

      Man this is AWESOME!

      Yup…just follow my setup videos, and configure your screens like I showed there and this Pack will work fine.

      That being said, later I’ll upload a minor adjustment that will help to “make it still work” in case people do some crazy stuff and don’t setup their Backglass 2 and Topper 2 screens correctly.

      Glad its working good for you. Do you have a Topper or Under screen? I wondered what anyone thought of my little Light Cycles moving across the screen…  :)

      #83163
       TerryRed 
      Moderator
      MemberContributorModerator

      V 1.1 minor update:

      – removed pupinit.bat file, as it may have been blocked for some users and cause a pop-up when playing. This file was only used as a way to try to keep VPX in focus after PuP was initialized. Not normally needed.

      – changed Other1 (Backglass2) and Other2 (Topper2) in PuP-Pack to use a “CustomPos” setting. This will make sure that both of these additional PuP Screen video layers will use the normal Backglass and Topper screens as a reference for size and position. This is just in case the user’s Default Backglass 2 and Topper 2 screen settings weren’t setup correctly…or are being used for other purposes.


      Some users who have liked this topic:

      • avatar
      • avatar
      #83179
       Johngreve 
      Participant
      Member

      This is unbelievable work Terry, you are without a doubt the “tip of the spear” all things PuP! While I have neither a Topper nor an Under to enjoy I want to say that I am on sensory overload with just the backglass videos running. Though I must say that I am curious to see what you are talking about when you mentioned the light cycles moving across the screen. I’d like to personally say thanks for all the work you do creating these wonderful Pup files,tweaking the tables to use them properly and of course providing all the support both here and on the FB groups. Don’t know how you do it all but “Thank you” and go easy on you hair…  :good:


      Some users who have liked this topic:

      • avatar
      #83268
       Mark70 
      Participant
      Member

      Superp work Terry, thanks a lot for sharing! Must have been tons of work.
      Now I have no excuse anymore to not use the upper free part of my DMD screen as “under screen” between Backglass and DMD.  And yes, the little Light Cycles are looking great! Like everything else.

      #83341
       TerryRed 
      Moderator
      MemberContributorModerator

      Note: this PuP-Pack can be used by anybody…even if you don’t have or want the Topper screen videos.

      If you don’t have a Topper screen or space…then you MUST disable the Topper in the “PUP-PACK!” (not in your default PuP screen settings!)

       

      Simply run the PuP-Pack Editor, and change these two Topper screens options to look like this:

       

       

       

      ….then save your PuP-Pack, and that’s it. You now can use the Max Pack without needing a Topper screen, and you will only see the Backglass videos.

      #83545
       Mark70 
      Participant
      Member

      Thanks for the “under screen” version! Works like a charm and looks great.
      I modified my backbox glass to show the former unused part of the DMD screen, which is now the “under screen”.

      I took this bad pic while playing, so you can see it..


      Some users who have liked this topic:

      • avatar
      • avatar
    Viewing 14 posts - 1 through 14 (of 14 total)

    You must be logged in to reply to this topic.

  • You have no permission to download this file.

  • ©2018 VPinBall.com

    WP Facebook Auto Publish Powered By : XYZScripts.com

    Log in with your credentials

    or    

    Forgot your details?

    Create Account