• Don't forget to rate 1-5 stars! Check the support tab for any help or comments.

  • (2)
    « »

    The Grid's most awesome addressable leds and HD PinUP Player videos make for Light Cycle ramp effects, Light Jet Cannons, Explosions and the coolest de-resolution effects you have ever seen in a real pinball cabinet!

     

    A video demonstration of this table can be seen here in my cabinet at 6m42s :

    https://youtu.be/rvA_5-vcZtc?t=6m42s

     

    The PuP-Pack (Videos) for this table can be found here:

    http://vpinball.com/VPBdownloads/tron-legacy-stern-ultimate-pup-pack-fp-bg-topper/

     

    Requirements:

    -PinUP Player 1.2+ installed and working

    - DOF R3 installed (for DOFLinx cabinet feedback and lighting) and addressable leds already setup and working (for MX led effects).

    - DOFLinx 6.10 or higher is REQUIRED, even if you don't have addressable leds or use PuP.

     

    Tron Legacy (Stern Ultimate) PinUp Player Pack (BackGlass and Topper)

    System:  Future Pinball, with BAM

    PuP-Pack: All Video, Media and Artwork by TerryRed PuP-Pack Editor files by TerryRed

    DOFLinx MX PuP mod: TerryRed

    Installation:

    Ensure there are no files in "PUPVideos  FP_TRONLEG_STERN_ULT" (if that folder already exists).

    Copy the PuP-Pack (FP_TRONLEG_STERN_ULT) folder into your PUPVideos folder.

    (example: C:Visual PinballTables PinUpPlayer PUPVideos FP_TRONLEG_STERN_ULT).

    Background Videos:

    Backglass:  Enabled by default

    Topper   :  Enabled by default

    (note background settings are configurable by using PinUPPackEditor.exe)

    Installation Notes:

    The Backglass has a default setting to enable a looping Background Backglass video.

    The Topper has a default setting to enable a looping Background Topper Video.  If you are using your own Topper Video (through Pinball X) you should either disable the Topper Background video (using PinUPPackEditor), or replace it with your own video.

    This PuP-Pack is designed for people with a Backglass and Topper.

    If you do not have a Topper screen, you do not need to use the PuP Topper if you don't want to. You can disable it for this only this table by using the PinUPPackEditor.

     

    This table has complete cabinet feedback and lighting support for the following:

    – 10 solenoids for flipper, slingshots, bumpers, etc.. – 5 RGB flashers – Blower Fan – Shaker – Gear motor – Strobe – Beacon – Start button – Coin button – Launch Ball button – RGB Undercab Lighting – Addressable Leds

    Ensure there are no files in "PUPVideos  FP_TRONLEG_STERN_ULT" (if that folder already exists).

    Copy the PuP-Pack (FP_TRONLEG_STERN_ULT) folder into your PUPVideos folder.

    (example: C:Visual PinballTables PinUpPlayer PUPVideos FP_TRONLEG_STERN_ULT).

     

    Requirements:

    -PinUP Player 1.2+ installed and working

    - DOF R3 installed (for DOFLinx cabinet feedback and lighting) and addressable leds already setup and working (for MX led effects).

    - DOFLinx 6.10 or higher is REQUIRED, even if you don't have addressable leds or use PuP.

    - addressable leds and PuP are NOT required to play this table, but they are HIGHLY recommended.

    - to use the addressable leds with this table you must have your DOF "config" files updated by using DOF Config Tool! (just like you would for Visual Pinball)

     

     

     

    To play a Future Pinball table with addressable leds support (DOFLinx MX):

     

    - update DOFLinx as per normal (must be 6.10 or higher). Make sure you copy over the new DOFLinx.vbs to "Future Pinball Scripts".

    - add DIRECTOUTPUTGLOBAL=c:DirectOuputConfigGLobalConfig_b2sServer.xml   (assuming you have it there)  to your DOFLinx.ini file.

    - download the awesomeness of a Future Pinball DOFLinx MX PuP table

    - check DOF Config Tool to see if support for that table has been added to it yet  (you will see FP tables start with "FP:") If there are no DOF commands showing for that table, its not supported yet.

    - "Generate" a new Config File (containing directoutputconfig30.ini in the zip)  and copy the new files to your "DirectOutput Configs"  folder.

    - play the epicness that is Future Pinball with DOFLinx cabinet feedback and addressable leds!

     

    DOFLinx 6.10+ download link:

     

    http://www.vpforums.org/index.php?app=downloads&showfile=12318

     

     

    Consult the DOFLinx guide included in the download link for more information on setting up DOFLinx.

    DOFLinx MX PuP update: (TerryRed)

    -added the coolest addressable led lightshow this side of The Grid.

    -added awesome PuP Player support to give you the coolest Backglass and Topper screens.

    This topic contains 0 replies, has 1 voice, and was last updated by  TerryRed 5 months ago.

    Viewing 1 post (of 1 total)
    • Author
      Posts
    • #74260
       TerryRed 
      Moderator
      MemberContributorModerator

      The Grid's most awesome addressable leds and HD PinUP Player videos make for Light Cycle ramp effects, Light Jet Cannons, Explosions and the coolest de-resolution effects you have ever seen in a real pinball cabinet!

       

      A video demonstration of this table can be seen here in my cabinet at 6m42s :

      https://youtu.be/rvA_5-vcZtc?t=6m42s

       

      The PuP-Pack (Videos) for this table can be found here:

      http://vpinball.com/VPBdownloads/tron-legacy-stern-ultimate-pup-pack-fp-bg-topper/

       

      Requirements:

      -PinUP Player 1.2+ installed and working

      - DOF R3 installed (for DOFLinx cabinet feedback and lighting) and addressable leds already setup and working (for MX led effects).

      - DOFLinx 6.10 or higher is REQUIRED, even if you don't have addressable leds or use PuP.

       

      Tron Legacy (Stern Ultimate) PinUp Player Pack (BackGlass and Topper)

      System:  Future Pinball, with BAM

      PuP-Pack: All Video, Media and Artwork by TerryRed PuP-Pack Editor files by TerryRed

      DOFLinx MX PuP mod: TerryRed

      Installation:

      Ensure there are no files in "PUPVideos  FP_TRONLEG_STERN_ULT" (if that folder already exists).

      Copy the PuP-Pack (FP_TRONLEG_STERN_ULT) folder into your PUPVideos folder.

      (example: C:Visual PinballTables PinUpPlayer PUPVideos FP_TRONLEG_STERN_ULT).

      Background Videos:

      Backglass:  Enabled by default

      Topper   :  Enabled by default

      (note background settings are configurable by using PinUPPackEditor.exe)

      Installation Notes:

      The Backglass has a default setting to enable a looping Background Backglass video.

      The Topper has a default setting to enable a looping Background Topper Video.  If you are using your own Topper Video (through Pinball X) you should either disable the Topper Background video (using PinUPPackEditor), or replace it with your own video.

      This PuP-Pack is designed for people with a Backglass and Topper.

      If you do not have a Topper screen, you do not need to use the PuP Topper if you don't want to. You can disable it for this only this table by using the PinUPPackEditor.

       

      This table has complete cabinet feedback and lighting support for the following:

      – 10 solenoids for flipper, slingshots, bumpers, etc.. – 5 RGB flashers – Blower Fan – Shaker – Gear motor – Strobe – Beacon – Start button – Coin button – Launch Ball button – RGB Undercab Lighting – Addressable Leds


      Some users who have liked this topic:

      • avatar
      1 user thanked author for this post.
    Viewing 1 post (of 1 total)

    You must be logged in to reply to this topic.

  • You have no permission to download this file.

  • ©2018 VPinBall.com

    WP Facebook Auto Publish Powered By : XYZScripts.com

    Log in with your credentials

    or    

    Forgot your details?

    Create Account