-
Rich replied to the topic Star Wars: Death Star Assault (Ultimate Pro) – Epic Space Battles in the forum Downloads Support Topics 3 years, 7 months ago
OK I did not realize that I did see no PinEvent but I was thinking that meant it used DofLinx. Now I got it all new table.
Awesome cant wait for PinEvent to be added.
-
Rich replied to the topic Star Wars: Death Star Assault (Ultimate Pro) – Epic Space Battles in the forum Downloads Support Topics 3 years, 7 months ago
I cant get Doflinx to work with this one. Just wondering if anyone else is having the same problem. It just timeout to default.
-
Rich replied to the topic PinEvent: DOF, MX, PUP, SSF, PUPDMD for Future Pinball in the forum Downloads Support Topics 3 years, 7 months ago
Hi going back a bit my post with the Doflinx error. It works fine if you use this delay.
timeout /t 5
cd /d c:directoutput
DOFLinxMsg.exe HOLD_ACTIVATION=0I hope this helps others who are having the same problem.
-
Rich replied to the topic PinEvent: DOF, MX, PUP, SSF, PUPDMD for Future Pinball in the forum Downloads Support Topics 3 years, 8 months ago
Hi and thanks for your help. The delay did not work but I did notice it took longer to error out so it was delayed. For now I will remove these tables from Popper and just play them outside of Popper. I have a lot of games that use Doflinx. hopefully they fix the hold command. IF not maybe I will put the work in to do your last recommendation.…[Read more]
-
Rich replied to the topic PinEvent: DOF, MX, PUP, SSF, PUPDMD for Future Pinball in the forum Downloads Support Topics 3 years, 8 months ago
Ok I did what you said and have the same problem. I think I need a delay to let my Sainsmart board come back as two are not loading right when Doflinx is started with popper. On start up all is good. I am including the log. Thanks for your help.
13-Aug-20 21:37:48.108 – DOF Linx for Pinball Emulators – DOFLinx by DDH69
13-Aug-20 21:37:48.113 -…[Read more] -
Rich replied to the topic PinEvent: DOF, MX, PUP, SSF, PUPDMD for Future Pinball in the forum Downloads Support Topics 3 years, 8 months ago
OK I got the close Doflinx to work but start up gives me an error. If I close Popper and restart Doflinx no problem. I tried to put a delay in the script but still the same thing. This is the close script.
cd /d c:directoutput
@echo off
SLEEP 3000
cd “C:DirectOutput”
start DOFLinx.exe -
Rich replied to the topic PinEvent: DOF, MX, PUP, SSF, PUPDMD for Future Pinball in the forum Downloads Support Topics 3 years, 8 months ago
Thanks for your response. I am trying to do this with bat files in pinup popper. The bat files work out side as a kill and start bat. how do i do this in popper. Here is my setup launch script. I never get to the close script as it locks up Popper.
rem Disable DOFLinx if “Custom Var #3” = NO_DOFLinx
cd /d c:directoutput
if “”==”NO_DOFLinx”…[Read more] -
Rich replied to the topic Munsters 2020 (Stern/Tribute) in the forum Downloads Support Topics 3 years, 8 months ago
Hi I am having trouble with DOF on this Table. It is working but not firing the right toys. My right flipper makes the shaker go on for example. I updated everything. Do you need to have UltraDMD set up for it to work right? Thanks for help
-
Rich replied to the topic PinEvent: DOF, MX, PUP, SSF, PUPDMD for Future Pinball in the forum Downloads Support Topics 3 years, 8 months ago
Hi has this problem been resolved.
IMPORTANT! For whatever reason, I get .NET errors with the current DOFLinx when using “DOFLinxMsg HOLD_ACTIVATION”.
I don’t know why it does it for me and some others… but some people have had no problems using it. If you get errors, than don’t use that command until a solution is found!
I have not seen…[Read more]
-
Rich started the topic DOF in Popper and PinEvent in the forum PinUp System 3 years, 11 months ago
Hi Guys
I had to resort to this weird setup to get everything working in my Cab. This was the only way to get DOF in Popper and PinEvent. I have all files running without admin and am just worried this is going to cause problems down the road. At this point everything is working but I have seen some stuff get stuck on like DMD not closing. I was…[Read more]
-
Rich replied to the topic PinEvent: DOF, MX, PUP, SSF, PUPDMD for Future Pinball in the forum Downloads Support Topics 3 years, 11 months ago
Hi I need to change the dir for your script. What I have is not working.
rem Disable DOFLinx if “Custom Var #3” = NO_DOFLinx
cd /d c:Visual PinballTablespluginsDirectOutputt
if “”==”NO_DOFLinx” (DOFLinxMsg HOLD_ACTIVATION=1) -
Rich started the topic Omg Thank you everyone in the forum PinUp System 3 years, 11 months ago
I recently upgraded from Pinballx to the Pinup Poper System. It all started with a table that needed Pinup Player to work right. It took me a while to get it working as DMD FREEZY was holding me out. I was able to get it going. By default it was set for a real DMD. I would like to say Thank you to Nailbuster and Terry Red. What an amazing s…