- This topic has 175 replies, 5 voices, and was last updated 3 years, 1 month ago by
.
-
Posts
-
Shouldn’t be a problem. Only thing I can see is maybe a rare case of screw or something falling off pop bumper and falling into board? Maybe a plexiglass shield below bumpers? Great looking build borgdog! You sure cleaned up that stuff good!
********************************************************
Messing with the VPinball app and push notifications.
So if you haven't downloaded app yet what are you waiting for!?
for IOS and Android********************************************************
You need to login in order to like this post: click here
I’m slow but eventually I get there. Â thanks to @randr for his dropbox sainsmart files that allowed me to get the serial numbers for the 2 sainsmart’s in my cab, oh and the cabinet.xml for 2 sainsmarts from there as well.
 got a short time of loading software tonight, editing a couple of files, and woohoo we have DOF toys!  
I still need to check and make sure all is working (I know I didn’t have the knocker go off in my short test), but here is a quick and dirty video showing/hearing some of the toys in action. Â I’m pretty excited, but damn is it loud with the tv and glass off the cab.
You need to login in order to like this post: click here
VERY nice! congrats!
********************************************************
Messing with the VPinball app and push notifications.
So if you haven't downloaded app yet what are you waiting for!?
for IOS and Android********************************************************
You need to login in order to like this post: click here
That’s a thing of beauty congrats. Only natural the amount of great EM’s you have put out that you have chimes and a bell. Love your using real pinball parts to simulate real pinball noises.
You need to login in order to like this post: click here
10 out of 10 to you !!
Love everything about your project – clever guy !
You need to login in order to like this post: click here
Looking through this thread again and i noticed your bar clamps…so i know i have a few and damn if i can find mine!
Anyways BUMP
********************************************************
Messing with the VPinball app and push notifications.
So if you haven't downloaded app yet what are you waiting for!?
for IOS and Android********************************************************
You need to login in order to like this post: click here
Looking through this thread again and i noticed your bar clamps…so i know i have a few and damn if i can find mine!
Anyways BUMP
LOL you can never have too many clamps, and I never have the right size or type when i need itÂ
You need to login in order to like this post: click here
one of my fav cab builds… a true woodworker…
You need to login in order to like this post: click here
Dan,
I am very impressed with your DOF setup.  Are you using Pinscape to drive those solenoids or is everything being switched through your Sainsmart relay boards?
Regards,
Rick
You need to login in order to like this post: click here
Thanks. I’m in the process of switching from sainsmart with an early zeb plunger/button input to a pinscape setup.
You need to login in order to like this post: click here
sorry wrong thread. cant seem to delete it. lol
You need to login in order to like this post: click here
Ha! Glad it didn’t. This thread needs to be re-bumped regularly!
You need to login in order to like this post: click here
Great job on the cab, Lots of nice documentation
You need to login in order to like this post: click here
Amazing and inspirational cabinet!
Where are the speakers located and what type did you use?
You need to login in order to like this post: click here
Amazing and inspirational cabinet!
Where are the speakers located and what type did you use?
Thanks!
There are currently 2 sets of 2.1 computer speakers. One set, an older Boston Acoustics with like a 4″ sub and 2″ish sides speakers in in the backbox behind the TV. It gives surprisingly decent sound from back there, I was going to add some speaker ports behind them and rebound the sound off the wall behind the cab but haven’t felt the need to, there are however some vent holes near the top of the backbox. The other set, a cheap logitech set of about the same size is in the main cab, more toward the player end. both sets have remote volume controls which are run to inside the coin door. They seem to be fairly well balanced at this point and I just use the main computer volume to turn it up and down, usually using the keyboard that is always there.
that’s the current state. If I ever get around to tearing the cab open and finishing the conversion to pinscape from the sainsmarts I will be adding another pair of speakers to the mix and go for the full surround sound setup. this will likely come if I ever spend the big bucks to upgrade the playfield to a 43″ 120hz monitor, in which case I would need to rebuild the cab to be wider. lately though the cab has been piled with parts for the current real pin I’m fixing up
You need to login in order to like this post: click here
I’m wondering if I can modify your cabinet to include these.
Harmon Kardon Sound Sticks ver 3 (meant to sound awesome) https://www.amazon.co.uk/Harman-Kardon-Soundsticks-Desktop-Speaker/dp/B003ZXDOMA
My thought is to add a speaker on each side of the wedge near the top at its widest, hopefully on each side of the monitor (see image)
Another bonus, the sub is down-firing, it should be possible to secure it into the cab.
What do you think?
Attachments:
You need to login in order to like this post: click here
Those look cool. Were you wanting to mount them on the outside? there is really no space at all next to the monitor in the head, just a little tiny triangle.
You need to login in order to like this post: click here
I was kinda hoping to put them on the inside :(
You need to login in order to like this post: click here
I suppose i could put them on either side of the top of the backbox, maybe put a flasher in front of each
You need to login in order to like this post: click here
Those do look badass. Neat idea. Keep us posted with what you come up with.
You need to login in order to like this post: click here
Forums are currently locked.
