VPINBALL Downloads (1660)

Yet another fresh beta build ;)

the friendly spider from the neighborhood with a PupPack in widescreen format works with the Spiderman Vault Edition table rom smanve_101c Pinup1.4 update now the different Overlays for this Packwill work. download the spideyPinup1.4update.zip open the folder and copy the files screen.pup+triggers.pup+playlist.pup in the mainfolder smanve_101c and overwrite the existing files. a very good TIp for 2 Screen user with real dmd. and without topper. Go to Puppackeditor set screen 6 dmdtopper to off.And then go to screen 0 topper custom position and use the position from the dmdtopper 2,30,82.5,40,17.5 and set it to forceback so you get the topper on the backglass with cool animations inkluded text System: Visual Pinball X (version 10.5+) Features: -21:9 Widescreen for the Backglassvideos -3 different main toppervideos(to change in the PupPackeditor -different toppervideos for all main features in the game -about 100 different Videos -animated underframe different in every playmodus -optional PuP-Tracks music (that replaces the mono low quality SAM music). Featuring (high quality stereo) Original Movie Soundtracks from the first 5movies. -5 different overlay frames changing in every modus. -different music tracks for every mode in the game. -works with all cabinet configurations (DMD can be positioned in the bottom text area if required) -over 70 PuPCapture DMD images being monitored -240 trigger events Important! If you have ANY of the above PuP screens "rotated" in the PuP default settings (you shouldn't though), then those same screens will also be rotated in this PuP-Pack! ===================================================== REQUIREMENTS: IMPORTANT! Visual Pinball X 10.5 All in One or higher installed (this is to include newest B2S Server): https://vpinball.com/VPBdownloads/categories/vpx-exes/ PinMAME 3.2 beta or higher installed: http://vpuniverse.com/forums/topic/3651-sambuild32-beta-thread/ PINUP SYSTEM (1.3.7 or higher): PinUP System 1.3.6 FULLY installed and PinUP Player setup. (The Pinup Popper front-end is not required for PuP-Packs, for those who use another front-end) https://vpinball.com/VPBdownloads/pinup-system-player-and-popper-front-end-install/ If you are upgrading from 1.3.5 or lower, you MUST first update to 1.3.6 and install the new dmddevicePUP.dll that comes with the 1.3.6 update, into your VPinMAME folder! http://www.nailbuster.com/wikipinup/doku.php?id=release_notes Then you need to update FROM 1.3.6 TO to 1.3.7 (until a newer update comes out). If these updates are not properly installed, then this PuP-Pack will not work correctly! (make sure there are no blocked files) http://www.nailbuster.com/pinupdates/PinUPSystem_update_1_3_7.zip DMDEXT: DMDExt 1.71 (32 bit/x86 files only!) or higher installed in your VPinMAME folder and configured to enable PUPCapture! This PuP-Pack relies on monitoring the freezy dmdext DMD for specific images to trigger videos and music (PuPCapture). This needs both the freezy 1.71+ "dmddevice.dll" file, and the Pinup Player "dmddevicePUP.dll" file in your VPinMAME folder. Ensure PuPCapture is enabled in the dmddevice.ini file (in your VPinMAME folder): [pinup] enabled=true Note: If you are using a real DMD, then ensure that the freezy virtual DMD is disabled in the dmddevice.ini file: ; a DMD that renders with nice dots on a computer monitor [virtualdmd] enabled = false PINMAME: In the PinMAME settings for Spidermanvault (press F1 during gameplay): - you must have "Use External DMD (DLL)" enabled. This will enable the freezy dmdext dmddevice.dll to be used, which is needed for PuPCapture. - have "Ignore Rom CRC Errors" enabled. (to allow the use of a custom rom) DMDs can now be ANY colour (or DMD colour mod) you want! This is a NEW feature with Freezy 1.71 files installed! There is no longer a requirement to have your DMD a specific colour for PuP-Packs in VPX! Your DMD must be in English for all PuPCapture video triggers to work correctly! PinUPPlayerB2SDriver and B2S SERVER SETTINGS: Be sure that your PuPB2s Driver and B2S server settings are setup and working correctly so you don't get any errors. http://www.nailbuster.com/wikipinup/doku.php?id=puppack_troubleshoot NO DIRECTB2S BACKGLASS RUNNING: You MUST NOT have a directb2s running at all, or it will obscure the PuP Backglass!!! Simply make sure you have a copy of your favorite Batman the Dark Knight table (intended only for use with this PuP-Pack), and make sure it is named VERY differently to your directb2s file, so when you launch that copy of your table it won't launch the directb2s! FRONT-END MEDIA DISABLED FOR Spidermanvault TABLE: Make sure you have no media displayed on your Backglass and Topper when launching the table from a front-end. Pinball X: In Games Manager, make sure you have "Hide Topper" and "Hide Backglass" enabled for the table you are using. Popper: In Games Manager, for the table you are using, enter -1 In the "Keep Displays ON" field (to not use Popper media on ALL Displays when launching the table) ================================================ INSTALLATION: Ensure there are no files in your "PUPVideos" "smanve_101c" folder (if that folder already exists). Copy the PuP-Pack "smanve_101c" folder from the archive into your PUPVideos folder. OST Movie Music To enable the PuP-Tracks music: if you don´t want to use the OST Music -edit the smanve_101c with the PuP-Pack Editor, and change Screen 4 (Music) to "Off". Then Save.And use your smanve_101c rom in VpinMame Roms folder that you already have -you MUST use my custom "Muted Music Rom" version of the smanve_101c.zip Rom file. Copy the smanve_101c.zip to your VPinMAME Roms folder (backup your original smanve_101c.zip file). This is required because SAM tables cannot have their music turned down or reduced by either VPX or the table's Service Menu. I made this custom version of the rom with all the game's music muted so it will allow only the PuP-Pack to play music for the game. -run the PinUpPlayerConfigDisplays.bat in the "PinupSystem" folder, and make sure your Music screen "Default State" is set to "Hide Always" (Sound Only) ================================================ PROBLEMS: If you have video stuttering or artifacts with PuP-Packs with VPX...  you most likely don't have VSYNC properly setup in VPX. Set "FPS Limiter/VSYNC" to 1, and "Maximum Pre-Rendered Frames" to 1 in VPX Video Options. This can also be set per-table in the Table's "User Customization" options, so check that as well. Having certain programs running in the background can also cause issues as they may interfere with VLC or prevent Overlays from displaying. Try closing out other programs / processes to see if that helps resolve any issues. If the OST music "during gameplay" isn't working correctly then you probably didn't update correctly. To make it CLEAR. You MUST be updated "properly" to Pinup System 1.3.7 for this Pack to work "correctly"! Some videos may not be triggering, and the OST Music PuP-Tracks will NOT work correctly without that update! Full instructions for updating and the links are in the Description under REQUIREMENTS. this PupPack use a feature that is for Pinup 1.4. please go first in the PupPackeditor under the music .... triggers and deactivate all trigger with the beginning frame .... (about 25 trigger). then only the main overlay frame runs. after release from pinup 1.4 you can activate them and you got different overlay frames for every playmode. Or if you don´t want to use the topper, set the screen0 (Topper) to off This relieves the system and stuttering should stop. For other issues with getting a PuP-Pack to work, refer to the wiki: http://www.nailbuster.com/wikipinup/doku.php?id=puppack_troubleshoot     Read More

This mod is based on Alessio's original table. Thanks Alessio for the great table! I haven't been able to contact the original author to get a permission to release this mod, so it's done in good will. If the original author sees this post and does not want it to be available, please contact me or vpinball staff to remove it. I do not want to step on anyone's toes. After Alessio, the table was further been improved by @markrock76. He has done a lot: a new stitched 4k playfield image, better aprons, fast flips, physics tweaks, script tweaks, sounds, material improvements etc. Lot's of work, so a huge thanks to him too. Extra thanks go to bord, wrd1972 and JP Salas   Read More

Finally...they are here! The new T-ARC themes for Pinup Popper! Thanks to the flexibility of Pinup Popper, you now have MANY new options for T-ARC themes that combine the beautiful Tarcisio Caleiro wheel ARC, and Pinup Popper's new Text Zones and 24 bit transparent loading video features! Features: - Options 1 and 2 for ARC and Text Layout - T-ARC images with 8 colours to choose from - T-ARC image options for "arrows", "no arrows", and "no text" - 24 bit Transparent Loading videos that can allow for a seamless transition from the Popper front-end to your game. Very cool! (depends on emulator fullscreen settings) - "Game Details" that will display all the Popper database information about your game when GameInfo is highlighted - Popper's Text Zones feature allows you to display all text for menus the way YOU want. Choose your own fonts, colours, size, position, prefixes, database content, Custom Text... however and wherever you want! - display flyers above the T-ARC in correct aspect ratio in Popper and in-game! - T-ARC Themes have options to be used on the Playfield screen in Landscape and Portrait layouts or on the Backglass! - T-ARC on Playfield Options comes in both 4K and HD setups (for each layout type) complete with matching 4K ARC images and Transparent Loading Videos. T-ARC on Backglass only comes in HD option (1920x1080) with matching HD media. - includes original T-ARC project files. Make your own T-ARC images and your own Transparent Loading videos and make your friends jealous for having such a cool looking custom front-end like no other! - all needed files and install instructions are included with each theme package! I even have pictures showing what you should be seeing for settings! Just a few copy and paste of files...change a couple of settings for your setup...add your desired T-ARC media for playlists....and you are done!   Requirements: This theme requires Pinup Popper and Pinup Player installed and updated to 1.4 or higher. http://www.nailbuster.com/wikipinup/doku.php?id=install_guide http://www.nailbuster.com/wikipinup/doku.php?id=upgrade_v14   Before installing a new theme, you should: - backup pinupmenu pup-pack folder - backup PUPMenuScriptThemeOptions.txt - backup your DB file - backup any media you will be replacing that you don't want to lose   How to Install: Please read to first post in this Support Thread to determine which theme zip package you need. You will make your choice based on: - Theme Options: 1 or 2 - ARC displayed on Playfield (most setups), or ARC displayed on Backglass (HD backglass only) - Layout of your playfield screen: Landscape (most setups) or Portrait - 4K (3840x2160) or HD (1920x1080) resolution of your playfield screen   PLEASE only download ONE zip theme package as it's all you need. Don't download ALL zip files!   Theme package zip contents: Please follow the included install instructions (the text file) step by step, and also make sure your settings are correct compared to ALL of the included pictures. Do not skip anything! Don't worry...it's an easy install. Please use 7zip to extract files to ensure none of them will get blocked by windows!   Important notes: As of Popper 1.4, users will no longer make any changes to the PupMenuscript.pup file for their user options! That file will be used only for the main Popper script code and fallback options. Now there are 3 new separate user files: PuPMenuScriptSysLanguage.txt (for user custom text for Popper system functions. This can be edited for other languages or anything really) PUPMenuScriptSysOptions.txt (for global options like enable DMD, enable DOF, enable / disable ALL text, and more) PUPMenuScriptThemeOptions.txt (new version of this file included with this theme update. This file is where all the theme settings relating to Text Zones and Text settings are kept)   The 3 user files above will not be replaced with future updates to Pinup Popper (after 1.4), so there is no worry about your custom settings being replaced.   Text Zones update: Users can now customize their theme layout for text options in the PUPMenuScriptThemeOptions.txt file. This can be fonts, colours, size, position, prefixes, database content, max characters, Game Details, Custom Text and more... all displayed however and wherever you want! All info can found in this file and it details everything you need to know. Use the included Text Zones pictures for reference.   Thanks: HUGE thanks goes out to Tarcisio Caleiro for providing the fantastic original ARC images from which this theme was created from!   Also thanks goes out to Nailbuster for Pinup Popper, and for providing support for my 100's of JavaScript questions for my Text Zones update.   I hope you enjoy the many T-ARC Theme options you have now to make Pinup Popper look the way YOU want. This theme is just a start...make it the way you like it!   Enjoy!   TerryRed   Video Walk-through: Most people seem to have no problems installing the new Themes...but for those who want a video walk-through...here you go. https://youtu.be/H3fbeiARAjE   Read More

Finally...they are here! The new T-BAR themes for Pinup Popper! Thanks to the flexibility of Pinup Popper, you now have MANY new options for T-BAR themes that combine the beautiful Tarcisio Caleiro wheel BAR, and Pinup Popper's new Text Zones and 24 bit transparent loading video features! Features: - Options 1  2 and 3 for BAR and Text Layout - T-BAR images with 8 colours to choose from - T-BAR image options for "no text" (Option 3 only) - 24 bit Transparent Loading videos that can allow for a seamless transition from the Popper front-end to your game. Very cool! (depends on emulator fullscreen settings) - "Game Details" that will display all the Popper database information about your game when GameInfo is highlighted - Popper's Text Zones feature allows you to display all text for menus the way YOU want. Choose your own fonts, colours, size, position, prefixes, database content, Custom Text... however and wherever you want! - display flyers above the T-BAR in correct aspect ratio in Popper and in-game! - T-BAR Themes have options to be used on the Playfield screen in Landscape and Portrait layouts or on the Backglass! - T-BAR on Playfield Options comes in both 4K and HD setups (for each layout type) complete with matching 4K BAR images and Transparent Loading Videos. T-BAR on Backglass only comes in HD option (1920x1080) with matching HD media. - includes original T-BAR project files. Make your own T-BAR images and your own Transparent Loading videos and make your friends jealous for having such a cool looking custom front-end like no other! - all needed files and install instructions are included with each theme package! I even have pictures showing what you should be seeing for settings! Just a few copy and paste of files...change a couple of settings for your setup...add your desired T-BAR media for playlists....and you are done!   Requirements: This theme requires Pinup Popper and Pinup Player installed and updated to 1.4 or higher. http://www.nailbuster.com/wikipinup/doku.php?id=install_guide http://www.nailbuster.com/wikipinup/doku.php?id=upgrade_v14   Before installing a new theme, you should: - backup pinupmenu pup-pack folder - backup PUPMenuScriptThemeOptions.txt - backup your DB file - backup any media you will be replacing that you don't want to lose   How to Install: Please read to first post in this Support Thread to determine which theme zip package you need. You will make your choice based on: - Theme Options: 1  2 or 3 - BAR displayed on Playfield (most setups), or BAR displayed on Backglass (HD backglass only) - Layout of your playfield screen: Landscape (most setups) or Portrait - 4K (3840x2160) or HD (1920x1080) resolution of your playfield screen   PLEASE only download ONE zip theme package as it's all you need. Don't download ALL zip files!   Theme package zip contents: Please follow the included install instructions (the text file) step by step, and also make sure your settings are correct compared to ALL of the included pictures. Do not skip anything! Don't worry...it's an easy install. Please use 7zip to extract files to ensure none of them will get blocked by windows!   Important notes: As of Popper 1.4, users will no longer make any changes to the PupMenuscript.pup file for their user options! That file will be used only for the main Popper script code and fallback options. Now there are 3 new separate user files: PuPMenuScriptSysLanguage.txt (for user custom text for Popper system functions. This can be edited for other languages or anything really) PUPMenuScriptSysOptions.txt (for global options like enable DMD, enable DOF, enable / disable ALL text, and more) PUPMenuScriptThemeOptions.txt (new version of this file included with this theme update. This file is where all the theme settings relating to Text Zones and Text settings are kept)   The 3 user files above will not be replaced with future updates to Pinup Popper (after 1.4), so there is no worry about your custom settings being replaced.   Text Zones update: Users can now customize their theme layout for text options in the PUPMenuScriptThemeOptions.txt file. This can be fonts, colours, size, position, prefixes, database content, max characters, Game Details, Custom Text and more... all displayed however and wherever you want! All info can found in this file and it details everything you need to know. Use the included Text Zones pictures for reference.   Thanks: HUGE thanks goes out to Tarcisio Caleiro for providing the fantastic original ARC images from which this theme was created from!   Also thanks goes out to Nailbuster for Pinup Popper, and for providing support for my 100's of JavaScript questions for my Text Zones update.   I hope you enjoy the many T-BAR Theme options you have now to make Pinup Popper look the way YOU want. This theme is just a start...make it the way you like it!   Enjoy!   TerryRed   Video Walk-through: Most people seem to have no problems installing the new Themes...but for those who want a video walk-through...here you go. https://youtu.be/H3fbeiARAjE   Read More

Finally...they are here! The new T-ARC and T-BAR Desktop themes for Pinup Popper! You've never seen an Arcade and Pinball front-end look this cool! Demonstrations for each Theme can be seen in these videos: https://youtu.be/DtOSB5gCRxg https://youtu.be/H3ToWrAgVhU   Thanks to the flexibility of Pinup Popper, you now have stunning looking options for a single screen Desktop Theme. Great for almost any gaming system. These T-ARC or T-BAR themes combine the beautiful Tarcisio Caleiro wheel ARC or BAR, and Pinup Popper's new Text Zones and 24 bit transparent loading video features! Features: - T-ARC or T-BAR options for single screen Desktop gaming - dazzling looking underlay (neon) videos, gameplay videos, and DMD / Marquee videos... all one one screen - T-ARC and T-BAR images with 8 colours to choose from - 24 bit Transparent Loading videos that can allow for a seamless transition from the Popper front-end to your game. Very cool! (depends on emulator fullscreen settings) - "Game Details" that will display all the Popper database information about your game when GameInfo is highlighted - Popper's Text Zones feature allows you to display all text for menus the way YOU want. Choose your own fonts, colours, size, position, prefixes, database content, Custom Text... however and wherever you want! - display flyers in correct aspect ratio in Popper and in-game! - 4K (3840x2160) or HD (1920x1080) options - includes sweet looking neon underlay videos, Gameplay videos, and DMD / Marquee videos for your Home Screen and Playlists! - includes original T-ARC and T-BAR project files. Make your own T-ARC or T-BAR images and your own Transparent Loading videos and make your friends jealous for having such a cool looking custom front-end like no other! - all needed files and install instructions are included with each theme package! I even have pictures showing what you should be seeing for settings! Just a few copy and paste of files...change a couple of settings for your setup...add your desired T-ARC or T-BAR media (and videos) for playlists....and you are done!   Requirements: This theme requires Pinup Popper and Pinup Player installed and updated to 1.4 or higher. http://www.nailbuster.com/wikipinup/doku.php?id=install_guide http://www.nailbuster.com/wikipinup/doku.php?id=upgrade_v14   Before installing a new theme, you should: - backup pinupmenu pup-pack folder - backup PUPMenuScriptThemeOptions.txt - backup your DB file - backup any media you will be replacing that you don't want to lose   How to Install: Please read to first post in this Support Thread to determine which theme zip package you need. You will make your choice based on: - T-ARC or T-BAR theme - 4K (3840x2160) or HD (1920x1080) resolution of your screen   PLEASE only download ONE zip theme package as it's all you need. Don't download ALL zip files!   Theme package zip contents: Please follow the included install instructions (the text file) step by step, and also make sure your settings are correct compared to ALL of the included pictures. Do not skip anything! Don't worry...it's an easy install. Please use 7zip to extract files to ensure none of them will get blocked by windows!   Important notes: As of Popper 1.4, users will no longer make any changes to the PupMenuscript.pup file for their user options! That file will be used only for the main Popper script code and fallback options. Now there are 3 new separate user files: PuPMenuScriptSysLanguage.txt (for user custom text for Popper system functions. This can be edited for other languages or anything really) PUPMenuScriptSysOptions.txt (for global options like enable DMD, enable DOF, enable / disable ALL text, and more) PUPMenuScriptThemeOptions.txt (new version of this file included with this theme update. This file is where all the theme settings relating to Text Zones and Text settings are kept)   The 3 user files above will not be replaced with future updates to Pinup Popper (after 1.4), so there is no worry about your custom settings being replaced.   Text Zones update: Users can now customize their theme layout for text options in the PUPMenuScriptThemeOptions.txt file. This can be fonts, colours, size, position, prefixes, database content, max characters, Game Details, Custom Text and more... all displayed however and wherever you want! All info can found in this file and it details everything you need to know. Use the included Text Zones pictures for reference.   Thanks: HUGE thanks goes out to Tarcisio Caleiro for providing the fantastic original ARC and BAR images from which this theme was created from!   Also thanks goes out to Nailbuster for Pinup Popper, and for providing support for my 100's of JavaScript questions for my Text Zones update.   I hope you enjoy these T-ARC and T-BAR Desktop themes. You can now to make Pinup Popper look the way YOU want. This theme is just a start...make it the way you like it!   Enjoy!   TerryRed   Video Walk-through: Most people seem to have no problems installing the new Themes...but for those who want a video walk-through...here you go. https://youtu.be/H3fbeiARAjE   Read More

Space a final Frontier..... HaHa not on your Cab.Here comes the StarTrek PuPPack Beam me up ….to your Cab tested with the StarTrek Enterprise LE (Stern) table, works with rom st_161hc optional a loading Video inkluded Audilaunch for the new T-ARC feature in PinupPopper1.4 Thanks to Terry Hagerty for help with troubleshooting. This PuPPack requires Pinup Popper and Pinup Player installed and updated to 1.4 or higher. System: Visual Pinball X (version 10.5+) Features: -21:9 Widescreen for the Backglassvideos -different Videos for all modes on every Level matching the Gameplay -different toppervideos for all main features in the game -animated Backglassunderlay, different for every Mode -optional PuP-Tracks music (that replaces the mono low quality SAM music). Featuring (high quality stereo) Original Movie Soundtracks from the movie. -11 different overlay frames changing in every modus. -different music tracks for every mode on every Level in the game. -works with all cabinet configurations (DMD can be positioned in the bottom text area if required) -over 100 PuPCapture DMD images being monitored -over 400 trigger events to get all work REQUIREMENTS: IMPORTANT! Visual Pinball X 10.5 All in One or higher installed (this is to include newest B2S Server): https://vpinball.com/VPBdownloads/categories/vpx-exes/ PinMAME 3.2 beta or higher installed: http://vpuniverse.com/forums/topic/3651-sambuild32-beta-thread/ PINUP SYSTEM (1.4 or higher): PinUP System 1.4 FULLY installed and PinUP Player setup. (The Pinup Popper front-end is not required for PuP-Packs, for those who use another front-end) http://www.nailbuster.com/wikipinup/doku.php?id=upgrade_v14&fbclid=IwAR1akUUjVX7FFPwftfM5GfKvBwf3oxFxJskg5FGS3nrPBk2uIDQtsIaexPY DMDEXT: DMDExt 1.71 (32 bit/x86 files only!) or higher installed in your VPinMAME folder and configured to enable PUPCapture! This PuP-Pack relies on monitoring the freezy dmdext DMD for specific images to trigger videos and music (PuPCapture). This needs both the freezy 1.71+ "dmddevice.dll" file, and the Pinup Player "dmddevicePUP.dll" file in your VPinMAME folder. Ensure PuPCapture is enabled in the dmddevice.ini file (in your VPinMAME folder): [pinup] enabled=true Note: If you are using a real DMD, then ensure that the freezy virtual DMD is disabled in the dmddevice.ini file: ; a DMD that renders with nice dots on a computer monitor [virtualdmd] enabled = false PINMAME: In the PinMAME settings for Star Trek (press F1 during gameplay): - you must have "Use External DMD (DLL)" enabled. This will enable the freezy dmdext dmddevice.dll to be used, which is needed for PuPCapture. - have "Ignore Rom CRC Errors" enabled. (to allow the use of a custom rom) DMDs can now be ANY colour (or DMD colour mod) you want! This is a NEW feature with Freezy 1.71 files installed! There is no longer a requirement to have your DMD a specific colour for PuP-Packs in VPX! Your DMD must be in English for all PuPCapture video triggers to work correctly! PinUPPlayerB2SDriver and B2S SERVER SETTINGS: Be sure that your PuPB2s Driver and B2S server settings are setup and working correctly so you don't get any errors. http://www.nailbuster.com/wikipinup/doku.php?id=puppack_troubleshoot NO DIRECTB2S BACKGLASS RUNNING: You MUST NOT have a directb2s running at all, or it will obscure the PuP Backglass!!! Simply make sure you have a copy of your favorite Star Trek table (intended only for use with this PuP-Pack), and make sure it is named VERY differently to your directb2s file, so when you launch that copy of your table it won't launch the directb2s! FRONT-END MEDIA DISABLED FOR STAR TREK TABLE: Make sure you have no media displayed on your Backglass and Topper when launching the table from a front-end. Pinball X: In Games Manager, make sure you have "Hide Topper" and "Hide Backglass" enabled for the table you are using. Popper: In Games Manager, for the table you are using, enter -1 In the "Keep Displays ON" field (to not use Popper media on ALL Displays when launching the table) ================================================ INSTALLATION: Ensure there are no files in your "PUPVideos" "st_161hc" folder (if that folder already exists). Copy the PuP-Pack "st_161hc" folder from the archive into your PUPVideos folder. OST Movie Music To enable the PuP-Tracks music: if you don´t want to use the OST Music -edit the st_161hc with the PuP-Pack Editor, and change Screen 4 (Music) to "Off". Then Save.And use your st_161hc rom in VpinMame Roms folder that you already have If you want OST Music (recommend) -you MUST use my custom "Muted Music Rom" version of the st_161hc.zip Rom file. Copy the st_161hc.zip to your VPinMAME Roms folder (backup your original st_161hc.zip file). This is required because SAM tables cannot have their music turned down or reduced by either VPX or the table's Service Menu. I made this custom version of the rom with all the game's music muted so it will allow only the PuP-Pack to play music for the game. -run the PinUpPlayerConfigDisplays.bat in the "PinupSystem" folder, and make sure your Music screen "Default State" is set to "Hide Always" (Sound Only) ================================================ PROBLEMS: If you have video stuttering or artifacts with PuP-Packs with VPX...  you most likely don't have VSYNC properly setup in VPX. Set "FPS Limiter/VSYNC" to 1, and "Maximum Pre-Rendered Frames" to 1 in VPX Video Options. This can also be set per-table in the Table's "User Customization" options, so check that as well. Having certain programs running in the background can also cause issues as they may interfere with VLC or prevent Overlays from displaying. Try closing out other programs / processes to see if that helps resolve any issues. If the OST music "during gameplay" isn't working correctly then you probably didn't update correctly. To make it CLEAR. You MUST be updated "properly" to Pinup System 1.4 for this Pack to work "correctly"! Some videos may not be triggering, and the OST Music PuP-Tracks will NOT work correctly without that update! Full instructions for updating and the links are in the Description under REQUIREMENTS If you don´t want to use Topper go to PupPackeditor and disable screen 0 For other issues with getting a PuP-Pack to work, refer to the wiki: http://www.nailbuster.com/wikipinup/doku.php?id=puppack_troubleshoot     Read More

Here are some loading Videos for Spiderman Star Trek and 2 universal loading videos one with lightningstrike at the end the other without All loading videos in 4k landscape and with a audilaunch mp3   Read More

A virtually reality version of TAF complete with entire room and other items. This version of VP is very much in it's infancy and will run fine on a high-end pc. Seems to be very CPU dependent with a higher clock speed is recommended. File is still being optimized so stay tuned for any further updates. For any support and help please follow this thread.. https://www.vpforums.org/index.php?showtopic=38417&page=1   V0.5.2 Changelog: Optimized room primitives, final primitive alignment, compressed all images. removed unused items from original table and accompanying images, corrected lighting, disabled ball shadows (option in script) removed train mod, removed phone mod. moved "T_H_I_N_G" lights to correct position. V0.5.4 Changelog: The "T-H-I-N-G" lights in backbox are now aligned and have the corrected images. Turning off the Packard mod made a noticeable improvement in performance (can be turned off in the F6 menu). Other minor fixes and tweaking. Added G5K's warm color grading images. Quote: Having seen some of the photos from Addams being quite blue I made a few LUTs to try and warm up the lighting. The ones with ‘bright’ shouldn’t change your highlight point, the ones with ‘dull’ will rolloff the highlight and make it less bright and warmer. On my monitor I’ve already got it set fairly neutral to warm and found my blues went a bit purple for my taste so made some options that left the blues alone. All explained in filenames but ultimately its the eye on whether it is getting better, worse or different Process; open table, select image manager from top menu, import images. Click on backdrop in toolbar, open options palette if not already open, 3/4 way down there is a colorlookup drop down. Select one (these will all go to top of the list because of underscore). I would then saveas before trying as depending on if you’ve run it it might crash and you’ll have to redo. The joys of authoring in VPX. ps. The best results will come with calibrating your monitor to be less blue. V0.6.1 Changelog: Changed playfields of AFM and TOM.  Both machines now have mocked DMD's working. Analog plunger now working (Zeb's Board plunger) Some value modifications may be required depending on plunger being used on your machine. Thank you Slydog43 Some minor improvements to shading and lighting. V0.6.7 Changelog: Optimized even more images on TAF Started baking the lighting in the room. (Just the four walls)     Read More

Full rebuild from scratch New HD translite image by wrd1972 2 versions : resolution 2560 x 2436 & 1280x1024 Grill full redraw (and removable) For 2 and 3 screens Authentic color lamps placement and Rom ID Authentic translite mask Photoshop lighting   A special thank you to wrd1972 for having asked me to realize this B2S, for having provided me with an image of the translite in HD and a video of the original animation. A special thank you to wrd1972 who shares his magnificent tables  (and all the other authors of the Funhouse table with its incredible realism : Shoopity, JPsalas, Cyberpez, Rothbauerw, 32assassin, Dark, Ninuzzu, Vanlion, Clarkkent, Arngrim, Flupper, Schreibi34  ;) ). Link to the table : https://vpinball.com/VPBdownloads/funhouse-williams-1990/ Cheers Blacksad   Read More

This ended up being a complete rebuild of Rascal's conversion. Special thanks to BorgDog for being the main mentor and SME on this build.  Couldn't have done it without you!  It all started with a fresh playfield image to work off of.  All credit and thanks to OCD_pinball from pinside for the playfield pictures which made this build all the easier to get as accurate as possible.  Thanks to Bord for his work on the graphics and  expert advice.  All the primitives were replaced and countless hours of detail and testing to make it play as accurate as possible. Thanks to Wildman for all of his amazing backglasses he creates and for the artwork and resources he made from his original table creation!  The plastic scans from his actual table were cleaned and added by Bord which makes the table pop! Lastly thanks to Thalamus and Arngrim for adding the final touches to the SSF and DOF which adds all the realistic effects that cant be beat! Thanks for the group effort and Enjoy!   Read More

This is a VP Conversion of probably the coolest FP table by B L I N D M A N K I N D P I N B A L L .at least its the largest code i have ever seen(while not very optimized) its still a monster! Amazing Original table! Table itself was a lot of work to build as the trap needs to work BUT there is a built in ball search so give it time if a ball goes missing. You will forget this has NO ROM control its all hand scripted....just amazing. I hand re-scripted 100,699 Lines of code! NO KIDDING! so i am certain i missed some stuff and YOU WILL GET ERRORS at some point but please play this beta and report any errors with screenshot of error! with over 100k lines of code the screen shot of error will help me fix issue quickly. Even on a game restart the balls dump out of trap and any out of hell before game restarts. If you want just like real pinball pressing both flippers will bypass bonus counts BUT its so cool at least watch it during beta testing to see if any errors happen. Table is just amazing but its a beta so here are known issues: 1: Lighting is not final 2: UltraDMD coding not finished but will get there 3: Have not Play tested to the end of game 4: I may have missed a sound here or there so please check debugger and provide any missing sounds listed that would be big help! 5: still needs SSF and DOF but that will have to wait for the"final" version 6; Don't press flippers for status report when game over as i have not scripted that part yet. if you want go ahead but you will get error Credits: I used Fluppers flasher demo table technic for the flashers. Download the very simple backglass available for download in download section under backglass section     Read More

Time to add some coolness and fun to your Pinup Popper T-ARC experience...with some crazy 24 bit Transparent Videos! These are some great examples of what you can do with Popper's ability to play 24 bit videos with transparency enabled. These allow for a seamless and cool transition from Popper to your game (depending in the emulator's fullscreen settings).   Videos included are: Bloody Saw F1 Cars Fire Marvel Matrix Race Cars Shark Stars Zombies   Each video is available in a format to work in each of the T-ARC themes. This is determined by: - T-ARC on Playfield or Backglass - Layout: Landscape or Portrait - 4K or HD   Requirements: This theme requires Pinup Popper and Pinup Player installed and updated to 1.4 or higher. T-ARC Theme, Option 1 or 2 Transparency enabled for the Loading Screen in PinupMenu PuP-Pack   How to use: Simply use Popper Media Manager to choose your Playlist or Game, then drag and drop your videos to the "Loading" rectangle. Done.   Please DO NOT download all files! Only download what you need for your theme and setup. I had to upload the 4K Loading Videos individually as they were just too big as one package.     Make your friends jealous with a whole new level of cool with these crazy and cool videos! Enjoy TerryRed     Read More

This is a mod of allknowing's Star Gazer table. I send him the pictures of the new playfiel and plastics and he gave permission to upload this table. Thank you allknowing. This is not realy a mod more a redraw or a mix of both. The graphics are not 100% correct, the girl at the botton is taken from the backglass. In the real table these images are different. A few of the zodiacs on top are missing, can't find good Pictures of the top playfield. I made the bumpers stronger and changed a little bit on the physic. The lights are new but GI is still from allknowing. Enjoy and Keep on playin' pinball Siggi   Read More

Here's a couple of wheels that I've cobbled together, just to make my Pinup Popper menu look a little more consistent.   None of these are really my own work; I've just put together a few resources I found floating around.   Update: I wasn't overly happy with the Roller Derby wheel, so I've tweaked it a little.   Read More

Loop friendly playfields in 1920X1080

Complete archive. Also included the new one's Safecracker, Theatre Of Magic and Champions pub.

Ghostbusters Stern 2016 LE Recreation for wheels

Time Fantasy (Williams 1983) - Incandescent Bulb + Rainbow RGB LED B2S Mod Based on backglass by Mfuegemann. A combined B2S double feature by RpT! The original backglass was way too bright for my setup such that I couldn't even make out the detail of the artwork. So as that needed fixing I decided to also add some extra animations and whatnot to go with my enhanced lightshow for this table (see my youtube channel). Needless to say, neither of these options are intended to emulate a factory version of this machine so apologies to the hardcore purists! ;) "Authentic" mode - Incandescent Bulbs Designed to replicate a worn machine with bulbs of varying age, condition and type (whoever owns this table might have swapped a few out)! A warm feeling backglass that's non intrusive but also has a few subtle effects thrown in for interest.   Preview: https://www.youtube.com/watch?v=kEYWj-05PYI   "Fantasy" mode - Rainbow RGB LED Mod Designed to compliment my psychedelic lighting (see the youtube) for people who think the backglass should also be colorful! Using some of the lamp triggers that I left out from that lightshow, hopefully this also enhances the theme of the table.   Preview: https://www.youtube.com/watch?v=tTj7UQdk8ns Install note Remember that to change between the two modes, right click on the backglass while the game is running. You may need to switch VPX into windowed mode. Once you change between "fantasy" or "authentic" restart the emulator. Bonus NOTE  Thanks for reading this far! For the VPX table itself, uncheck "show mesh" on lights "s1" and "s2" to resolve a clipping issue where the bulbs show through the sling plastics. Hopefully this table is now DONE and set up to the max so i can move on to something new! ^-^   Read More

Roman Victory (Taito 1978), starting from a good and big image i had only to clean a lot of  scratches, redraw blank parts around the edges, restore parts under flashing lights. Removed artifact around solid color border too.     As for all TTL Taito's B2S made before, this one looks digital but works as EM (rare table, rom lost), and it has all elements ready to work (coin counters, match numbers, lights) that needs B2S EM  commands inside table script to work properly.   Inside zip file a preview image and Wheel logo too.   PS Upload today 15th march 2019 (a day a called "idi di marzo") this B2S backglass because it has as main theme Rome, and as main character Giulio Cesare, died in 44 BC exactly on this day. For those who like history.   Read More

Thanks to Carlos Guizzo for the really rare images he sent me. This is another backglass for a Taito's TTL table. Tryed to do my best for the best possible result, because original pictures were full of light reflexes. I had to redraw all the background, chess pieces, writings and numbers. Main characters, title and castle was instead cleaned and enhanced.     Read More

Junkyard Cats created by Brendan Bailey 2012 (another masterpiece) in Future Pinball is now available on VPX.    />About Brendan Brendan Bailey buys, fixes, sells, appreciates, and designs pinball machines. His love of the art, music, and design of arcade games knows no bounds. He was exposed to Williams pinball machines of the late 80's and early 90's at age 3 and has forever been a big a fan of creativity featured throughout those games. The desire to create original pinball machines is what fueled Brendan's exploration into creativity. From (slowly) learning Photoshop to composing electronic music, Brendan owes all of the inspiration for his abilities to the work of the designers, artists, programmers, and musicians of late 80's Williams pinball. Brendan went on to study graphic and new media design at Hofstra University, a career path he never would have discovered had it not been for pinball. Junkyard Cats is 100% original - Brendan created everything you see, hear, and experience during the game - even the voices! He cannot thank Christopher Leathely enough for creating the Future Pinball platform with such incredible passion and attention to detail. Brendan lives on Long Island and works as the creative director for Generations Beyond, a digital design agency in Ronkonkoma, NY... and yes, they have pinball machines in the office!  Original Junkyard Cats Webside: http://www.junkyardcats.net/index.php   PD: I can not test the table properly, my PC work has a graphics card onboard and I reboot the system, I apologize for possible bugs.   Read More

Bally's 1980 gem Viking for VPX 10.6 minimum. Hard to find this table these days. I hope you enjoy playing it. Table by bord. DOF by Arngrim. Includes directB2s file. Uses 'vikingb' 7 digit ROM. If you're playing in desktop view change .hidden=1 to .hidden=0 in the script. PM me if you have any tweaks you want to contribute.   Read More

updated Gottlieb Ball Gate brackets and flap. Includes somewhat lower poly version ones for those that want that sort of thing. Made off measurements from real ones, as close as I could make it. SEE INSTALLATION NOTES, PLEASE.   Read More

Mod Includes: [FSS] Backglass/Box/Backlight. [CCX] Color Correction. [PGI] Persistent General Illumination , & [SHD] Shadows. [D&N] Day and Night transition. [NPF] Altered Playfield. [ABG] Animated Backglass/Active backglass. [UFL] User backglass feedback light system(Tilt, BIP,PIP,GOver, 100k etc...) Original Author(s) VP9: n/a Original Author(s) VPX: Loserman76 , Bord (lightmap, physics)   Read More

This is a mod of Allknowing's Mata Hari. In 1983 a german manufactor made this kit for Ballys Mata Hari to convert it to Lady Death. The pictures on the table looks a lot like Vampirella, a very popular comicbook in this time. Maybe they can't get the rights for the name so they called it Lady Death. Thank's to Allknowing for his Mata Hari table, without all of you guys this all would not be possible. I made a redraw of playfield and plastics starting with JP Salas VP9 version. Made also a new Vampirella apron, you can change to the original in the image manager. Just rename "mh_plastics" Changed all the lights, EEI, physics and a lot more. Enjoy and Keep on playing pinball.   Read More

Mod Includes: [FSS] Backglass/Box/Backlight. [CCX] Color Correction. [PGI] Persistent General Illumination , & [SHD] Shadows. [FF] Fast Flips. [D&N] Day and Night transition. [NPF] Altered Playfield. [D&N] Day and Night transition. Original Author(s) VP9:  unclewilly Original Author(s) VPX: 32assassin, vintage mod by Vogliadicane,   Read More

Mod Includes: [FSS] Backglass/Box/Backlight. [CCX] Color Correction. [PGI] Persistent General Illumination , & [SHD] Shadows. [FF] Fast Flips. [D&N] Day and Night transition. [NPF] Altered Playfield. [ABG] Animated Backglass/Active backglass. [D&N] Day and Night transition. [KPFC] Kicker Pass/Fail Class. Original Author(s) VP9: Original Author(s) VPX: bord  , djrobx ,rothbauerw ,32assassin ,tnjhead ,Ted Bowie, Haunt Freaks, and testers   Read More

Welcome to the VP10 version of Funhouse - made by Williams in 1990. A true classic pinball with every single image and detail modeled straight from my real Funhouse machine. After seven months + of development, Rudy is waiting to kick your ass! No stone left un-turned on this recreation folks. If its in the real machine, then you will find it in this table. Thanks to Shoopity for allowing me to complete his awesome Funhouse WIP and extra thanks to Cyberpez for the tons of excellent 3D work and Rothbauerw for the complex scripting assistance. These guys worked some serious overtime on this table and I cant thank them enough for their contributions. Well done guys. These guys deserve major props and the table would not be what it is without them. Be sure to check out the many options available for the table including the add-on playfield toys and various Rudy visual and sound enhancements. The random Rudy punch sounds are very amusing and will keep you laughing. :) ***The very talented FH development team.*** Original VP10 beta by "Shoopity" and completed by "wrd1972" Original content borrowed from "JPsalas" VP9 table Additional scripting by "cyberpez", "rothbauerw", "32assassin" Plastics prims by "cyberpez" Playfield toy, marble ball and faceless Rudy mods by"Cyberpez" Creepy Rudy artwork by "Rothbauerw" Clear ramps by "dark" Wire ramps by "ninuzzu" Subway by "ninuzzu" Rudy face prims by "vanlion" Mystery mirror by "cyberpez" PF lighting by "wrd1972" Flashers and bulbs by "wrd1972" Physics by "wrd1972" PF image refresh by "clarkkent" DT view scoring reels and background by "32assissin" DOF by "arngrim" Flasher domes by "flupper" PF inserts prims by Schreibi34       Read More

this is a Mod more of a semi rebuild of a mod of a mod Original NFL (Mod)  table by Slidepoint initial Striker Xtreme table by kalabera3 table got -More primitives -graphic upgrades -full code rebuild with no custom NFL sound calls their is more then one missing plastic, I do not have a decent source to rebuild the image.  a missing plastics image is included.   Note that table is being uploaded as a Beta,  the Goalie code had to be modified , I was getting an error, and I could not figure out why,  Other then that the original code had X defined as  a variable even though VP uses the X as a variable for position.  Sw43 (magnet) is temporary set to visible as it should move with the goalie primitive.     Read More