• Don't forget to rate 1-5 stars! Check the support tab for any help or comments.

  • Don't forget to "THANK" or "LIKE" the Author's 1st post in support topic.

  • (9)
    « »
  • Download Info

    Thumb
  • 4 Square http://www.ipdb.org/machine.cgi?id=940 Table By Loserman76 Backglass image used in B2S courtesy of Wildman

    The playfield is a redraw 100% by me. So if it sucks, you know why - haha

    I've included a wheel image, but it has been sitting on my hard drive for so long that I forgot who did it. If it is yours, let me know and I'll add you to the credits.

     

    Includes stuff/tips/tricks from hauntfreaks, BorgDog, GNance, JPSalas, Pinuck and probably many others that I've missed.

    when game is not in progress, holding down left flipper for about 3-5 seconds will bring up the options menu. left flipper selects item, right flipper changes option

    in addition to the "standard" keys (typically "1" to start game and "5" for coin), I've added "3" for coin and "4" for coin and auto-start game to simulate 3 coin slots

    Shadow config settings:

    Look for these 2 lines near the beginning of the scripting:

    Const ShadowFlippersOn = true Const ShadowBallOn = true

    change to false if you want either of the shadows not showing on your tables

     

    VPX 10.5

    initial release

    Currently, there are 0 users and 0 guests visiting this topic.
    Viewing 20 posts - 1 through 20 (of 25 total)
    • Author
      Posts
    • #97773
      Loserman76
      Participant
      @loserman76
      vipMemberContributor

      4 Square http://www.ipdb.org/machine.cgi?id=940 Table By Loserman76 Backglass image used in B2S courtesy of Wildman

      The playfield is a redraw 100% by me. So if it sucks, you know why - haha

      I've included a wheel image, but it has been sitting on my hard drive for so long that I forgot who did it. If it is yours, let me know and I'll add you to the credits.

       

      Includes stuff/tips/tricks from hauntfreaks, BorgDog, GNance, JPSalas, Pinuck and probably many others that I've missed.

      when game is not in progress, holding down left flipper for about 3-5 seconds will bring up the options menu. left flipper selects item, right flipper changes option

      in addition to the "standard" keys (typically "1" to start game and "5" for coin), I've added "3" for coin and "4" for coin and auto-start game to simulate 3 coin slots

      Shadow config settings:

      Look for these 2 lines near the beginning of the scripting:

      Const ShadowFlippersOn = true Const ShadowBallOn = true

      change to false if you want either of the shadows not showing on your tables

       

      12 users thanked author for this post.
      #97775
      bord
      Moderator
      @bord
      MembervipContributorModerator

      Awesome! Thanks for your work, @Loserman76. Not sure I’ve ever played one of these IRL.

      #97782
      randr
      Keymaster
      @randr
      ModeratorMember

      Thanks for another small flipper table loserman :good:

      ********************************************************
      Messing with the VPinball app and push notifications.
      So if you haven't downloaded app yet what are you waiting for!?
      for IOS and Android

      ********************************************************

      #97789
      Thalamus
      Moderator
      @thalamus
      ContributorMemberModerator

      Thank you very much @loserman76 for another great EM reproduction. Looking forward to try this one out ! :yes:

      #97809
      Kalavera3
      Participant
      @kalavera3
      Member

      I did not know this table, thank you very much for your great work.

      #97826
      Micronaut
      Participant
      @micronaut
      Member

      wow!, this is fantastic guys. :yahoo:
      I had the chance to play many times in the real pinball machine in the 70s, in Spain we had a version of the manufacturer “petaco”, his name was not 4 square, it was 4X4,
      thank you very much loserman76 for this excellent work and thanks also to all those who have collaborated and for making it possible to enjoy this classic electro mechanical pinball. :bye:

      #97885
      kds70
      Participant
      @kds70
      Member

      Very nice table … would this table be DOF´ed by @arngrim via DOF Config in the future ? :mail:

      VPin: Williams Time Warp Cabinet (1979), 4K playfield: 40" Iiyama X4071UHSU, backglass: 32" LG. Pin2DMD, Pincontrol 1, LEDWiz, leaf switches / buttons, nudging, tilt, plunger, 10 big siems contactors / knocker, PC: Intel i5 2500k@4.5Ghz, 8 GB Ram, Zotac GTX 1070 Mini, Win10

      #97889
      bord
      Moderator
      @bord
      MembervipContributorModerator

      Very nice table … would this table be DOF´ed by @arngrim via DOF Config in the future ? :mail:

      I have created an entry for 4 Square (change game name in the script to 4square_1971) in the configtool. It is empty now but anyone interested can submit their config for testing/approval.

      #97906
      The Loafer
      Participant
      @theloafer
      Member

      This is a superbly addictive and fun game. I think I played it for an hour before I finally got a decent score (6000’ish).  Gameplay is not for the faint of heart.

       

      1st Spoiler alert, keep the ball at the top of the table because aiming for those lower targets will kill your game.

      2nd Spoiler alert: That first spoiler alert isn’t a spoiler, this is how you have to play the real table to do well so kudos to Loserman for nailing another quality EM, the gameplay is spot on

      #97920
      bord
      Moderator
      @bord
      MembervipContributorModerator

      This is a superbly addictive and fun game. I think I played it for an hour before I finally got a decent score (6000’ish). Gameplay is not for the faint of heart.

      1st Spoiler alert, keep the ball at the top of the table because aiming for those lower targets will kill your game.

      2nd Spoiler alert: That first spoiler alert isn’t a spoiler, this is how you have to play the real table to do well so kudos to Loserman for nailing another quality EM, the gameplay is spot on

      Good tips, man. I managed 8785 tonight (see post-it) and had a blast doing it. This is a great game!

       

      Attachments:
      #97923
      robertms
      Participant
      @mophead
      Member

      This is a superbly addictive and fun game. I think I played it for an hour before I finally got a decent score (6000’ish). Gameplay is not for the faint of heart.

      1st Spoiler alert, keep the ball at the top of the table because aiming for those lower targets will kill your game.

      2nd Spoiler alert: That first spoiler alert isn’t a spoiler, this is how you have to play the real table to do well so kudos to Loserman for nailing another quality EM, the gameplay is spot on

      Good tips, man. I managed 8785 tonight (see post-it) and had a blast doing it. This is a great game!

      Great game Bord, and a nice looking screenshot  ;-) What kind of lighting adjustments did you do to get the warm glow effect? Was it just an Env/Lut change or something more?

      #97924
      bord
      Moderator
      @bord
      MembervipContributorModerator

      I got hooked on the game so on my lunch break I threw it in Blender and rendered out a lighting layer for the PF and then did the same for the sidewalls. I didn’t render a GI off state so it kinda breaks the effect after a game but I had to get back to playing. My goal now is to roll the score…

      #97926
      Arngrim
      Participant
      @arngrim
      DOF MinisterMember

      unfortunately I have less time for vp, i’m late about the SS releases and if I add the EM tables, this is too much for me for the moment.

      Hopefully someone can take the EM, loserman is putting the DOF calls into his scripts already so there just need to fill the dof config in the configtool, well, some verification that the dof script can be good also

      Very nice table … would this table be DOF´ed by @arngrim via DOF Config in the future ? :mail:

      I have created an entry for 4 Square (change game name in the script to 4square_1971) in the configtool. It is empty now but anyone interested can submit their config for testing/approval.

      #97928
      The Loafer
      Participant
      @theloafer
      Member

      bord:  nice lighting!!!   Great score, though now every time I see the high score’s AAA initial, I’ll think you set it!  The challenge is on, gonna be hard to roll thing one, but as with any well designed game, it’s doable, we just gotta go into “the zone”

      #97937
      bord
      Moderator
      @bord
      MembervipContributorModerator

      now every time I see the high score’s AAA initial, I’ll think you set it!

      Yeah, my button needs some adjusting. I get double or triple hits regularly.

      #97957
      kds70
      Participant
      @kds70
      Member

      A nice game – really. So i took some time and remanaged some lightning and cleaned the bulbs :mail:

      So the light is now casted to the ball too.



      @bord
      : Your shadow map looks amazing and much more smoother than my lightning changes … a chance to get it ? :rose:

       

       

      VPin: Williams Time Warp Cabinet (1979), 4K playfield: 40" Iiyama X4071UHSU, backglass: 32" LG. Pin2DMD, Pincontrol 1, LEDWiz, leaf switches / buttons, nudging, tilt, plunger, 10 big siems contactors / knocker, PC: Intel i5 2500k@4.5Ghz, 8 GB Ram, Zotac GTX 1070 Mini, Win10

      Attachments:
      #98088
      kds70
      Participant
      @kds70
      Member

      I have created an entry for 4 Square (change game name in the script to 4square_1971) in the configtool. It is empty now but anyone interested can submit their config for testing/approval.

      if i change the game name to 4square_1971 than the b2s backglas won´t start anymore. never had those issue …

      i´ve updated all (dof config; created some bumpers (e105 for example) in table config etc.). dof works then; but no b2s backglas.

      if i leave gamename empty or i leave the old game name, than the backglas starts as expected.

      searched the script for issues; but i´m not a scripting guru.

      any ideas ?

      VPin: Williams Time Warp Cabinet (1979), 4K playfield: 40" Iiyama X4071UHSU, backglass: 32" LG. Pin2DMD, Pincontrol 1, LEDWiz, leaf switches / buttons, nudging, tilt, plunger, 10 big siems contactors / knocker, PC: Intel i5 2500k@4.5Ghz, 8 GB Ram, Zotac GTX 1070 Mini, Win10

      #98090
      bord
      Moderator
      @bord
      MembervipContributorModerator

      I have created an entry for 4 Square (change game name in the script to 4square_1971) in the configtool. It is empty now but anyone interested can submit their config for testing/approval.

      if i change the game name to 4square_1971 than the b2s backglas won´t start anymore. never had those issue …

      i´ve updated all (dof config; created some bumpers (e105 for example) in table config etc.). dof works then; but no b2s backglas.

      if i leave gamename empty or i leave the old game name, than the backglas starts as expected.

      searched the script for issues; but i´m not a scripting guru.

      any ideas ?

      Yeah, I’m pretty sure this was my mistake. I was trying to keep alpha order in the config system without realizing that a number at the beginning wouldn’t work.

      SO return the game name to Loserman’s original: GTB_4Square_1971 (clearly he’s smarter than me). Your config entry should still be there for this game.

      Let me know if it is working. Thanks!

      1 user thanked author for this post.
      #98091
      kds70
      Participant
      @kds70
      Member

      good to know; thank you Bord. Try it later … now lets hunt highscores ;-)

      VPin: Williams Time Warp Cabinet (1979), 4K playfield: 40" Iiyama X4071UHSU, backglass: 32" LG. Pin2DMD, Pincontrol 1, LEDWiz, leaf switches / buttons, nudging, tilt, plunger, 10 big siems contactors / knocker, PC: Intel i5 2500k@4.5Ghz, 8 GB Ram, Zotac GTX 1070 Mini, Win10

      #98094
      kds70
      Participant
      @kds70
      Member

      SO return the game name to Loserman’s original: GTB_4Square_1971 (clearly he’s smarter than me). Your config entry should still be there for this game.

      Let me know if it is working. Thanks!

      It works now … perfect. if i´m finished i could make my DOF 4 square table config puplic ? (quick and dirty as every time) :mail:

      VPin: Williams Time Warp Cabinet (1979), 4K playfield: 40" Iiyama X4071UHSU, backglass: 32" LG. Pin2DMD, Pincontrol 1, LEDWiz, leaf switches / buttons, nudging, tilt, plunger, 10 big siems contactors / knocker, PC: Intel i5 2500k@4.5Ghz, 8 GB Ram, Zotac GTX 1070 Mini, Win10

    Viewing 20 posts - 1 through 20 (of 25 total)
    • You must be logged in to reply to this topic.
  • Please login to download.

  • ©2020 VPinBall.com

    Log in with your credentials

    or    

    Forgot your details?

    Create Account

    The Vpinball app

    FREE
    VIEW