• Don't forget to rate 1-5 stars! Check the support tab for any help or comments.

  • Don't forget to "THANK" or "LIKE" the Author's 1st post in support topic.

  • (4)
    « »
  • Download Info

    Thumb
  • Going to a go-go, 'cause everybody is Going to a go-go, oh, come on now-ow. Don't you wanna go?

    Up to 4 players can compete on this 1966 Williams table. It's a 4-flipper, 6 outlane drain monster!

    Competing with others is fun because the bonus accumulates and you can, with skill and a bit of luck, steal it away from the other players to take a big point lead.

    Many thanks to this community's table creators from whom I have learned so much.

    Extract .vpx, .pov and .directb2s files to your tables folder. Media files can be found the Visual Pinball folder.

    Press F6 or hold left flipper to bring up options menu.

    v1.0 - Initial release. Cabinet and dektop modes supported. No DOF yet.

    v1.1 - kicSpin.kick set to 183 degrees eject angle to avoid having ball loiter in bumper and saucer area. Hexagon wall surrounding bonus spinner sides set to visible. Mechanical Tilt key check added. Turned on Filter Mechanical Plunger for cabinet users. Four extar ball award score tiers added that match points shown on instruction card.

     

    This topic contains 21 replies, has 14 voices, and was last updated by  STAT 2 months, 3 weeks ago.

    Currently, there are 0 users and 0 guests visiting this topic.
    Viewing 20 posts - 1 through 20 (of 22 total)
    • Author
      Posts
    • #137804
       PinPlayer 
      Participant

      Going to a go-go, 'cause everybody is Going to a go-go, oh, come on now-ow. Don't you wanna go?

      Up to 4 players can compete on this 1966 Williams table. It's a 4-flipper, 6 outlane drain monster!

      Competing with others is fun because the bonus accumulates and you can, with skill and a bit of luck, steal it away from the other players to take a big point lead.

      Many thanks to this community's table creators from whom I have learned so much.

      Total of 26 users thanked author for this post. Here are last 20 listed.
      #137812
       randr 
      Keymaster
      ModeratorMember

      This looks like a great table! Never played or seen one before…very cool

      thank you👍🏻

      ********************************************************
      Messing with the VPinball app and push notifications.
      So if you haven't downloaded app yet what are you waiting for!?
      *******************************************************

      #137813
       Thalamus 
      Moderator
      ContributorMemberModerator

      Looks great – thank you !

      #137814
       STAT 
      Participant
      MemberContributor

      That Looks great, have to Play it soon … :good:

      #137815
       rothbauerw 
      Participant
      ContributorMembervip

      Looks very cool! Can’t wait to check it out!

      Current Project: Perpetual updates of VPX physics.

      #137818
       PinPlayer 
      Participant

      I noticed while playing this latest version on my cabinet that cabinet players will need to turn on the “Filter Mechanical Plunger” setting. I also noticed I left walB6615 invisible while debugging — make side visible.

      I hope everyone enjoys playing this table. On this VPX as well as the real table, you’ll find it likes to drain quickly.

      My friend who has the real table always warns me to watch out for the blue leg of death…

      BLoD

      #137824
       JR 
      Participant
      Member

      Love the colors and….pointy people!  What a neat table from 1966?  Four player back boxes must have been a hoot back then.  Thanks so much!!

      #137825
       bord 
      Participant
      MembervipContributor

      Cool upload. Thanks for all your work!

      #137829
       Onevox (PeteM) 
      Participant
      Member

      Groovy table. Love it.

      #137878
       Thalamus 
      Moderator
      ContributorMemberModerator

      Very nice.  :good: I changed the kicker angle just a little bit from 181 to 183. The ball kept going in relative same pattern and I rounded the score on first game. I also added a “missing” MechanicalTilt key check.

      #137916
       clyde 
      Participant

      Awesome! Thank you very much.

      #137920
       randr 
      Keymaster
      ModeratorMember

      I too had to change kicker I used thalamus’s suggestion or ball would rarely get out of pop bumper/kicker area :)

      great table btw!

      ********************************************************
      Messing with the VPinball app and push notifications.
      So if you haven't downloaded app yet what are you waiting for!?
      *******************************************************

      #138008
       united kingdom 
      Participant

      another excellent table from 1966

      and yes watch the   blue leg of death… :yes: :good:   :good:

      #138025
       Rajo Joey 
      Participant
      Member

      Here is my wheel in Tarcisio’s style.

      A-Go-Go (Williams 1966)

      • This reply was modified 3 months, 3 weeks ago by  Rajo Joey.
      • This reply was modified 3 months, 3 weeks ago by  Rajo Joey.
      2 users thanked author for this post.
      #138108
       clyde 
      Participant

      Thanks for the update. Was there supposed to be a music file included in the zip?

       

       

       

      #138111
       PinPlayer 
      Participant

      No music file included or  required. The only music included in this table is a small 5 second audio clip that plays when the option menu displays.

      1 user thanked author for this post.
      #138291
       Stevenoj2769 
      Participant

      Fun table but I have one problem.  I cannot get the backglass to display.  I have 880 other tables displaying the backglass but I cannot figure this one out.  In the script I did set:

      Line 87      B2SOn = True’ True/False to turn on DOF

      When I do I get Controller errors.

      I appreciate any suggestions you all have.

      Thanks!

      #138333
       johnbymy 
      Participant

      Bonjour

      J’ai aussi le même souci d’affichage du B2s avec erreur si ligne modifiée

      Merci si solution…

      Magnifique table sinon

       

      #138445
       PinPlayer 
      Participant

      Actually, line 87 is not required because regardless of whether you set B2SOn = true or false, line 130’s LoadEM command (code for LoadEM can be found in controller.vbs script) overrides that variable setting and creates the B2S.Server object then runs it. That should start the backglass. I cannot seem to reproduce the error on my desktop or cabinet computers.

      For compatibility’s sake, compare your software versions & revisions to mine…

      This table was last saved using VPX 10.6.0 revision 3743 32bit.

      B2SDesigner v1.2 was used to create the directb2s file.

      B2S Server is version 1.3.0.1 (run as .exe, not .dll)

      Controller.vbs script is version 1.2 by arngrim.

      …according to the directions in controller.vbs, you should also check your registry setting ForceDisableB2S = 0. If it is set to 1 then the backglass will not load.

      ___________________

      En fait, la ligne 87 n’est pas obligatoire car, que vous ayez défini ou non B2SOn = true ou false, la commande LoadEM de la ligne 130 (le code de LoadEM se trouve dans le script controller.vbs) remplace ce paramètre de variable et crée l’objet B2S.Server puis l’exécute. . Cela devrait commencer la lunette arrière. Je n’arrive pas à reproduire l’erreur sur mon ordinateur de bureau ou mon ordinateur.

      Par souci de compatibilité, comparez les versions et les révisions de votre logiciel avec les miennes …

      Cette table a été enregistrée pour la dernière fois à l’aide de la révision 3743 32 bits de VPX 10.6.0.

      B2SDesigner v1.2 a été utilisé pour créer le fichier directb2s.

      B2S Server est la version 1.3.0.1 (exécutée en tant que .exe, pas .dll)

      Le script Controller.vbs est la version 1.2 d’Arngrim.

      … conformément aux instructions du fichier controller.vbs, vous devez également vérifier le paramètre ForceDisableB2S = 0 de votre registre. S’il est défini sur 1, la lunette arrière ne se charge pas.

      #138449
       johnbymy 
      Participant

      Bonjour

      Super ! j ai modifié la ligne 130 et tout est ok

      Grand merci pour cette information claire et précieuse

       

    Viewing 20 posts - 1 through 20 (of 22 total)

    You must be logged in to reply to this topic.

  • Please login to download.

  • ©2019 VPinBall.com

    Log in with your credentials

    or    

    Forgot your details?

    Create Account