• Don't forget to rate 1-5 stars! Check the support tab for any help or comments.

  • Don't forget to "THANK" or "LIKE" the Author's 1st post in support topic.

  • (16)
    « »
  • Download Info

    Thumb
    • Author: BorgDog
    • Version: 0.96
    • Views: 5385
    • File size: 34.00 MB
    • Downloads: 1246
    • File Author: BorgDog, gtxjoe
    • IPDB link:: http://www.ipdb.org/machine.cgi?id=2285
    • Updated: July 2, 2017
    • Categories:
  • Because there were not enough versions already I went ahead and did a fairly quick build of  Gottlieb's 1980 Amazing Spider-man.  There were a couple things that prompted me to do so, firstly the others were all built as a standard width whereas Amazing Spider-man is a wide-body (and despite my rants to the contrary I used the dimensions in the so called dimensions manager instead of doing math, I am on vacation). Secondly the other versions were also made with 7 digit displays and use the 7-digit rom, Spider-man was origianlly a 6-digit display so I went back to the stock version. And I wanted to put the desktop score displays on the backdrop instead of having the dmd display.

    Most of the image resources for this are from gtxjoe's version of the table, thanks for the blanket permission to mod.

    The desktop score lights I originally borrowed from a 32assassin table and at some point re-drew all the lights so the individual leds better matched the Gottlieb displays, not sure which of my tables has the redrawn ones Nobs for sure and this one.

    The included direcdtb2s is a quick mod of wildman's 7- digit version to 6 digit with color change.

    I'm doing this primarily on my laptop so there may be some oddities, and I have not gone through the physics with a fine tooth comb but it plays reasonably wells. No idea if DOF is setup in the script or not, will make sure it works when I'm back at the cab and will include in final release.

    yeah, put where your tables go, needs 10.3

    0.96 - changed script back to use 6 digit rom so it works right again for desktop, included haunts landscape cab settings and included rom file

    0.95 - script changes for dof by arngrim

    initial pre-release for testing

     

    Currently, there are 0 users and 0 guests visiting this topic.
    Viewing 20 posts - 1 through 20 (of 29 total)
    • Author
      Posts
    • #57794
      BorgDog
      Participant
      @borgdog
      MemberContributorvip

      Because there were not enough versions already I went ahead and did a fairly quick build of  Gottlieb's 1980 Amazing Spider-man.  There were a couple things that prompted me to do so, firstly the others were all built as a standard width whereas Amazing Spider-man is a wide-body (and despite my rants to the contrary I used the dimensions in the so called dimensions manager instead of doing math, I am on vacation). Secondly the other versions were also made with 7 digit displays and use the 7-digit rom, Spider-man was origianlly a 6-digit display so I went back to the stock version. And I wanted to put the desktop score displays on the backdrop instead of having the dmd display.

      Most of the image resources for this are from gtxjoe's version of the table, thanks for the blanket permission to mod.

      The desktop score lights I originally borrowed from a 32assassin table and at some point re-drew all the lights so the individual leds better matched the Gottlieb displays, not sure which of my tables has the redrawn ones Nobs for sure and this one.

      The included direcdtb2s is a quick mod of wildman's 7- digit version to 6 digit with color change.

      I'm doing this primarily on my laptop so there may be some oddities, and I have not gone through the physics with a fine tooth comb but it plays reasonably wells. No idea if DOF is setup in the script or not, will make sure it works when I'm back at the cab and will include in final release.

      8 users thanked author for this post.
      #57807
      randr
      Keymaster
      @randr
      ModeratorMember

      Thanks borgdog will see how this looks sized “properly”

      ********************************************************
      Messing with the VPinball app and push notifications.
      So if you haven't downloaded app yet what are you waiting for!?
      for IOS and Android

      ********************************************************

      #57808
      bord
      Participant
      @bord
      MembervipContributor

      Love it. Can’t wait to give it a go.

      #57809
      HauntFreaks
      Moderator
      @hauntfreaks
      vipContributorMember

      wait no fancy flipper and ball shadows?? is this the no frills version?…   ;)

      hehehe   thanks man

       

      #57810
      BorgDog
      Participant
      @borgdog
      MemberContributorvip

      wait no fancy flipper and ball shadows?? is this the no frills version?… ;) hehehe thanks man

      LOL, I actually remove those from the tables that come with them, so yes the no frills version.  :bye:

      Thanks borgdog will see how this looks sized “properly”

      Usually I don’t care for wide-body tables of that era much; they seem to try and cram extra stuff in to fill the space, Genie for example, nice to look at but I just don’t enjoy the layout. This one however doesn’t seem to suffer from that malady, just has those double-flipper bitches to worry about.

      #57831
      randr
      Keymaster
      @randr
      ModeratorMember

      I like the double flipper bitches! makes you think before you act

      thanks for doing the build

      ********************************************************
      Messing with the VPinball app and push notifications.
      So if you haven't downloaded app yet what are you waiting for!?
      for IOS and Android

      ********************************************************

      #57832
      HauntFreaks
      Moderator
      @hauntfreaks
      vipContributorMember

      wait no fancy flipper and ball shadows?? is this the no frills version?… ;) hehehe thanks man

      LOL, I actually remove those from the tables that come with them, so yes the no frills version. :bye:

      Thanks borgdog will see how this looks sized “properly”

      Usually I don’t care for wide-body tables of that era much; they seem to try and cram extra stuff in to fill the space, Genie for example, nice to look at but I just don’t enjoy the layout. This one however doesn’t seem to suffer from that malady, just has those double-flipper bitches to worry about.

      see now inquiring minds want to know… why?

      #57834
      HauntFreaks
      Moderator
      @hauntfreaks
      vipContributorMember

      here are my Landscape settings…..
      asm_landscape

      Attachments:
      #57837
      BorgDog
      Participant
      @borgdog
      MemberContributorvip

      see now inquiring minds want to know… why?

      why I remove the shadows?  They just seem off to me, flippers I’m usually OK with, the ball shadow just doesn’t seem right, what is it the shadow from? a light right above the machine? and it seems to override playfield lights with no regard to them.  Just doesn’t seem realistic to me.

      I like the double flipper bitches! makes you think before you act thanks for doing the build

      definitely takes some getting used to when you start playing it. I have them on my Solar Ride at home and really have to think about it until I’m used to them.

      #57841
      HauntFreaks
      Moderator
      @hauntfreaks
      vipContributorMember

      good enough reason for me….   the first table I think I seen it used was mario brothers and it did seem off…. but the new tables like ac/dc and STTNG it looks really good IMO

      #57842
      Drybonz
      Participant
      @drybonz
      Member

      I also always remove the ball shadow from all tables.  Looks bad to me… makes the ball looks like it’s levitating over the table.  I will probably always remove it.  Hopefully, people find a way to add it as a script option, but either way is fine.

      #57845
      HauntFreaks
      Moderator
      @hauntfreaks
      vipContributorMember

      I also always remove the ball shadow from all tables. Looks bad to me… makes the ball looks like it’s levitating over the table. I will probably always remove it. Hopefully, people find a way to add it as a script option, but either way is fine.

      that’s because the shadow is to far away from the ball it needs to be a little farther under the ball (this can be done in the script) and a bit sharper on the edges…
      I dont see this on the newer tables…    I’ve made my own shadow on a couple….

      #57846
      Drybonz
      Participant
      @drybonz
      Member

      Yeah, I keep looking at them on the newer tables… I think Rothbauer had one that looked pretty good… but I’m just not crazy about it so I comment it out.

      #57862
      randr
      Keymaster
      @randr
      ModeratorMember

      I also always remove the ball shadow from all tables. Looks bad to me… makes the ball looks like it’s levitating over the table. I will probably always remove it. Hopefully, people find a way to add it as a script option, but either way is fine.

      that’s because the shadow is to far away from the ball it needs to be a little farther under the ball (this can be done in the script) and a bit sharper on the edges… I dont see this on the newer tables… I’ve made my own shadow on a couple….

      That video blew up my brain lol

      ********************************************************
      Messing with the VPinball app and push notifications.
      So if you haven't downloaded app yet what are you waiting for!?
      for IOS and Android

      ********************************************************

      #57864
      xenonph
      Participant
      @xenonph
      MemberContributor

      I noticed you used gtxjoes playfield.

      I made a Fantasy sound mod of gtxjoes Amazing Spider-Man version, but I also uploaded a regular version where I just touched up the playfield. There were alot of chips in the paint in gtxjoes version that I cleaned up.

      You have my permission to use this cleaned up playfield version for this mod if you want to.

      If you put both playfield pics side by side, you will see that I actually spent alot of time touching up all the chips and other things.

      EDIT: I added touched up playfield as attachment. No chips in cloud area..no lines all the way up playfield, touched up jonah jameson and auntmay..also Scorpios back. Also Lizardmans tail. The lettering under spiderman. Can’t remember but I did alot more.

       

      Thanks for making this mod!!

      It is appreciated!!

      Keep on Pinballin’

      Attachments:
      #57874
      BorgDog
      Participant
      @borgdog
      MemberContributorvip

      thanks xenonph, I had actually downloaded and played your versions as well(and arconovum’s FSS version) before building this.   I actually like the used playfield look, makes it seem more “real” to me.  I much prefer to use a scan of a playfield vs a redraw when possible just for that reason.  Some of the dings in the playfield actually helped in this build, especially the 3 marks by the kicker holes as I knew exactly where to aim the kickers.  Of course those vary from machine to machine somewhat.

      #57891
      xenonph
      Participant
      @xenonph
      MemberContributor

      Sounds logical to me.

      Thanks again Sir.

      #57905
      randr
      Keymaster
      @randr
      ModeratorMember

      Dof works except for drop targets. @arngrim :)

      ********************************************************
      Messing with the VPinball app and push notifications.
      So if you haven't downloaded app yet what are you waiting for!?
      for IOS and Android

      ********************************************************

      #58056
      Arngrim
      Participant
      @arngrim
      DOF MinisterMember

      Dof works except for drop targets. @arngrim :)

      Hey @Randr,

      The drop targets feedback is working, but there is a delay between the drop target and the DOF feedback, never saw that before, but as a fix I have put a delay in the drop target reset effect in the configtool and that does the trick :)

      also, some fixes in the script aboscripted DOF effects

      https://pastebin.com/1xACaPjW

      1 user thanked author for this post.
      #58077
      BorgDog
      Participant
      @borgdog
      MemberContributorvip

      Thanks Denis for the dof fix.

      Uploaded v0.95 with the only change being arngrim’s script fixes.

    Viewing 20 posts - 1 through 20 (of 29 total)
    • You must be logged in to reply to this topic.
  • Please login to download.

  • ©2020 VPinBall.com

    Log in with your credentials

    or    

    Forgot your details?

    Create Account