VPB Downloads

Rolling Stones (Bally 1980) PLEASE READ BELOW - IMPORTANT INSTALL INSTRUCTIONS INCLUDED: This is a complete VPX 10.6 Re-Build of the Rolling Stones (Bally 1980) table originally done by JPSalas a few years ago. I asked JPSalas if he was planning on doing an update (graphics and physics) to his version and he said he wasn't planning on it any time soon, and gave me his blessing to go ahead and do an update / rebuild. GoldChicco did a complete rebuild of the table to bring it up to VPX 10.6 standards and I redid all the graphics, artwork, some scripting option, BRAND NEW backglass and a slew of extras. * * * PLEASE NOTE: This table uses the 7 digit Rolling Stones ROM Music files can be downloaded here: https://mega.nz/folder/7XxkVTqa#2nRMN9sTXIQwaCoqYRMdRg Make sure you put the music files in a folder named 'stones' in your VPX Music folder. TABLE ADDITIONS: - - - - - - - - - - New playfield, plastics, backglass, etc graphics. - Added 47 Game Play music tracks that can be played in either Playlist order or Random play and the ability to be turned ON or OFF at the top of the table script. - Added 13 LUT Brightness / Contrast Adjustments that can be done during game play. - Added Flipper Shadows that can be turned ON or OFF at the top of the table script. - Added Ball Shadows that can be turned ON or OFF at the top of the table script. - Added Alternate Drop Target options for Factory Default and Custom Upgrade versions that can be changed at the top of the table script. - Added 3 Ball and 5 Ball Cards, and 3 different Instructions Cards Option depending on your ROM settings. - Added Prims for all visible holes for giving the illusion of playfield DEPTH. Look at the wood around and under the drop targets and the lower lane roll overs to see this feature. - Adjusted Hundreds of Playfield Parts, Lights and Options for smoother gameplay. - Enhanced / New GI Lighting. - Included 2 .HDR environments that can be changed in the Table Options > Lighting setting. Default is Environment 1. Environment 2 has slightly "muted" colors. ROM SETTINGS: - - - - - - - - - - When the table is loaded, press the F6 key on your keyboard to set the ROM options for the table to your liking. These options will also determine which 'Instruction Card' and 'Ball Card' you should display on the apron with the script options at the top of the table script. You can also set the MATCH feature, # of Balls, and Show Credits with this feature. If you decide to use the Music feature, the ROM sounds are a little too loud. Press the F12 key to open the ROM sound volume adjustment. 0 is default. You cannot RASIE the volume over 0. Use this feature to set the ROM volume to -5 or -6 so the ROM sound is quieter. When you set the volume DB lower and click 'OK' or 'SAVE', VPX will automatically save this setting. You will need to restart the table for this new setting to take affect. The F12 feature is a little known option in VPX and is a BIG HELP for reducing the ROM volume for older tables like this one and some others that the ROM sounds are much too loud. I have used this feature with SEVERAL early Stern tables that were deafening compared to others. USING LUT OPTIONS: - - - - - - - - - - - - - - - - - - When you boot the table for the first time, the table might appear a lot brighter than it is intended. Hold down the LEFT MAGNASAVE and then press the RIGHT MAGNASAVE to cycle through the 13 LUT options. This bypasses the need of using the Day / Night slider. Depending on the resolution of your playfield monitor, everyones preferred LUT setting is different. When you cycle through the LUT options, when you select the one you prefer for your setup - it will automatically be saved when you exit / quit the table for the next time you play the table. You can adjust the LUT Option at any time when the table is loaded, even during gameplay. PLEASE NOTE: Pressing the LEFT MAGNASAVE will shut off the music as well. Simply press the RIGHT MAGNASAVE (without the LEFT MAGNASAVE pressed) to resume music playback. MUSIC OPTION: - - - - - - - - - - By default, the Music Option is set to "Ordered Playlist". Start the Music at anytime by pressing the RIGHT MAGNASAVE button. If you want to turn OFF the music at anytime, press the LEFT MAGNASAVE. All music and audio has been properly balanced, equalized, and completely re-mixed so no audio 'interferes' with the sounds of the game itself. If you turn OFF the music when adjusting the LUT feature, simply press the RIGHT MAGNASAVE to start the music again. You can skip to the NEXT MUSIC TRACK by pressing the RIGHT MAGNASAVE again while the music is playing. INSTALLATION (VERY IMPORTANT): - - - - - - - - - - - - - - - The install is fairly standard and straight forward, except for 1 IMPORTANT thing, the Music folder for VPX. In order to avoid the growing 'mess' of a million .mp3 files in your Music folder, the additional audio / music files for this table NEED TO BE INSIDE a folder called 'stones'. This reduced adding to the clutter and global warming problem. So when you unzip the music / audio for this table, the directory structure should look like this when installed 'Visual Pinball / Music / stones'. You will get an error when you boot the table if the mp3 files are simply dumped into the Music folder. - Enjoy the table. FILES INCLUDED: - - - - - - - - - - I have included enough extra materials / goodies as a complete package to fill out every screen of your cab (if you are playing in a cab), with 2 wheels styles for PinballX and Popper front ends, RealColorDMD and Toppers or Over / Unders for LCD screens, and some other things. Rolling Stones (Bally 1980) 1.0.directB2S Rolling Stones (Bally 1980) 1.0.vpx Rolling Stones (Bally 1980) 3-Ball-Card.png Rolling Stones (Bally 1980) 5-Ball-Card.png Rolling Stones (Bally 1980) Instructions-Card-E.png Rolling Stones (Bally 1980) Instructions-Card-F.png Rolling Stones (Bally 1980) Instructions-Card-G.png Rolling Stones (Bally 1980) RealColorDMD - BW - 128x32.avi Rolling Stones (Bally 1980) RealColorDMD - Light Blue - 128x32.avi Rolling Stones (Bally 1980) RealColorDMD - Purple - 128x32.avi Rolling Stones (Bally 1980) RealColorDMD - Red - 128x32.avi Rolling Stones (Bally 1980) RealColorDMD - Yellow - 128x32.avi Rolling Stones (Bally 1980) Special Topper or LCD DMD - 1280x390.mp4 Rolling Stones (Bally 1980) Wheel 1.png Rolling Stones (Bally 1980) Wheel 2.png Bally Neon Topper - BW - 1280x390.mp4 Bally Neon Topper - Light Blue - 1280x390.mp4 Bally Neon Topper - Pink - 1280x390.mp4 Bally Neon Topper - Purple - 1280x390.mp4 Bally Neon Topper - Red - 1280x390.mp4 Bally Neon Topper - Yellow - 1280x390.mp4 CREDITS: - - - - - HiRez00 - All Table Graphics and Options GoldChicco - Table Re-Build, Scripting, Updates, and Testing JP Salas - LUT Selector Enhancement & original base table - - - - - - - - - - - - - - Permission to Mod: NO - - - - - - - - - - - - - - This project took considerable time and I wanted to share it with everyone ... so "thanks" or comments in the support topic would be greatly appreciated. PLEASE NOTE: I create these image, videos, tables and backglass files for fun and for the dedicated VPX pinball users on this and other forum. I DID NOT create this for you to download as SELL, MAKE MONEY OR PROFIT ON ... You have been warned! DO NOT include any of these files with other downloads or projects without asking / getting permission first. All Logos, Copyrights and Trademarks are property of their respective owners. PROVIDED STRICTLY FOR PERSONAL / HOME USE AND NOT FOR COMMERCIAL SALE / RE-SALE OR DISTRIBUTION!   Read More

Hello everyone I present a table on the theme Willy wonka. but first I thank Scottywic for permission to use part of his script from The Leprechaun King table and the orbital demo script thank you very much.the table takes the theme willy wonka it’s a test version, made me a return on the problems that could be on the table I just spent 205 hours on and I still have 60% of the Pup pack to do so be patient for the final version because there is a lot of work but the table is playable and fun to play. good fun to all I expect your return thanks again to scotty. the link to the willy wonka pack will remain until the final version thank you   Read More

***Rev.2.0 - New art and BG lighting based on B2S by HauntFreaks. New physics based on 3.0 physics by JPSalas. Update FSS general lighting. This is a modification of the cyberpez table (Thanks for this great table man), conversion to the FSS (Full Single Screen) format by me (Morttis). All the modification was done through Nick's guidelines (Arconovum). Thank you very much for the guide videos. Well, I hope you like it, you can improve it, but it's a great start to have fun in this table format. Obs: Now, art and BG lighting based on B2S by HauntFreaks (Thanks). Thanks to everyone involved in creating Visual Pinball and creating the tables, without you the fun would not be the same. Enjoy it.   Read More

This is a conversion to FSS format made by me (Morttis). The original table is from JPSalas, thank you very much for this title made by you. Well, thank you very much to Nick (Arconovum) for all the help you have given me since I started editing FSS tables. The Art and general lighting of the BG was based on the B2S by Wildman (Thanks for this job). What's new in the FSS version? ... Well, here we go: - Insertion of BB and BG, with lighting based on the B2S by Wildman (thank you); - insertion of the Day & Night code and other table lighting effects, giving a better visual effect and realism; - this FSS conversion was based on version 3.0 of the JPSalas table, that is, it already has the physical 3.0 made by him; - and I think that's it. And thank you very much to all the VPX and table developers, without you the fun wouldn't be possible. Anyway, here's another great title for those who like the Taito do Brasil tables, now in the FSS format. Enjoy it.   Read More

conversion of PBecker's VP9x table to VPX Thanks to PBecker and Itchigo for the VP9x version. ZIP includes a wheel and B2S MOD only by permission of ALL parties involved. And for God's sake, don't include it as part of a commercial cab.   Read More

VPX table by: Goldchicco & 32assassin vp9 table by: MRCMRC Special Thanks to : 32assassin for helping me with this release and for sharing his passion, knowledge and time. Movieguru for working on the images and to create the table wheel for your front-end This rare beauty was produced by: Playmatic  a Spanish manufacturer of pinball machines, producing 63 different models between 1968 and 1987 Hope you enjoy it and please leave constructive feedback or comments in the support topic and will try to make it better. All Logos, Copyrights and Trademarks are property of their respective owners. PROVIDED STRICTLY FOR PERSONAL / HOME USE AND NOT FOR COMMERCIAL SALE / RE-SALE OR DISTRIBUTION! Permission to Mod: Yes with approval   Read More

This is a conversion to FSS format made by me (Morttis). The original table is from JPSalas, thank you very much for this title made by you. Well, as usual, all the work was done through the tutorial videos of Nick Christopher (Arconovum), and everyone already knows how much I appreciate the support he has been giving me all this time (Thank so much Nick). The Art and general lighting of the BG was based on the B2S by Wildman and Carlos Guizzo (thanks, for this job). What's new in the FSS version? ... Well, here we go: - Insertion of BB and BG, with lighting based on the B2S by Wildman and Carlos Guizzo (thanks); - insertion of the Day & Night code and other table lighting effects, giving a better visual effect and realism; - this FSS conversion was based on version 3.0 of the JPSalas table, that is, it already has the physical 3.0 made by him; - and I think that's it. And thank you very much to all the VPX and table developers, without you the fun wouldn't be possible. Well, this is a great new title that could not be missing in the FSS format. Enjoy it.   Read More

My first VPX recreation Abbey Corinthian Master Bagatelle Built from the original game board Inspired by Ballyhoo by Warbler33    Read More

Christmas is almost here! It was the 6th of november this year i got a message to make a table together with somebody. I send this person messages with all the information, but didn't got any reply back lol. I decided to postpone my other projects and started on the 10th of November on new x-mas table "Drunken Santa". 19 days later this is the result! First to all thanks to Davor Lipovac for using a sound from his Heineken table. Also my special thanks to stevegooner, because he is mister x-mas and provide all the nice x-mas tables in this community! I hope I'm also a good contribution to this community! This is an original table, with everything included in the vpx file, and it doesn't need any external program to run. It can be run in desktop mode and in FS mode. The DMD will rotate accordingly. This is a 5 ball game with on 1,3 and 5 million an extra ball. This table is with ball savers on the side for more playing time! I put the music in the backglass(I also learn from last time) and add a flex dmd table. (for the flex table i used a different letter type, because the original wasn't showing nice on the dmd) He drinks, burbs and he farts it's drunken Santa. Santa crashed with his sleigh when he wanted to deliver a package and now he is stuck in the chimney. Can you help drunken Santa and his elfs to lift the sleigh and get the package delivered? Collect the 100 toys in Santa's workshop for an extra bonus. Don't forget the beer and toy bonus. Hit the beers out of the ice for extra bonus points Can you get al 10 reindeers from the parking? Hit three times the Christmas for an extra ball complete the chimney for multiball complete the sleigh for multiball Leave a message behind and rank the table please! Drink one on me and have a merry x-mas and a happy new year! Cheers   Read More

Here is my heavy Mod of Cue Ball Wizard. For me it is still a WIP, so I'll keep up working on it, but at the moment I'm a bit tired of it and thought, it's in a good shape to release as v0.7. I have a thousand more ideas. maybe later. See changelog for details, what I did. ---------------------------------------------------------------------------------------- Change LUT (=lighting) with left and right Magna Save keys. Results are saved. Change look of upper acrylic playfield in script options (glass like, worn out, grunge) ---------------------------------------------------------------------------------------- Credits: I started with Bigus' version. Table history: JPSalas (VP9 version) -> Rascal (conversion to VPX) -> Bigus (BigusMod) -> My version So all credits go to thewe guys. ---------------------------------------------------------------------------------------- Big thanks go to: - @Schreibi34 for his awsome insert images https://vpinball.com/VPBdownloads/prerenderd-insert-images/ - and most for creating all 8-Ball unit primitives for this table it was a great pleasure to work with you, mate! - @kds70 for some great help with scripting Thanks a lot my friend! - @jipeji16 for letting me steal his code for LUT changing and saving. All LUTs used are from me, but you better look at the code, where he stole from (with permission.. at least he calimed so ;) ) - @Thalamus for checking and updating the script for SSF ---------------------------------------------------------------------------------------- hope you enjoy!   Read More

VPX Conversion by: Goldchicco & 32assassin vp9 table by: mfuegemann Special Thanks to : 32assassin for helping me with this conversion and for sharing his passion, knowledge and time. This rare beauty was the last production made by Juegos Populares before the factory was closed down. A DIP switch menu allows the adjustment of number of balls and some other table features. At the top of the script You can change some settings: - choose between 4 apron designs, Quijote and Pimbal with both English and Spanish instruction cards - enable the apron match light animation (if You run the table without a B2S) The table rules a are included in the download file. Hope you enjoy it and please leave constructive feedback or comments in the support topic and will try to make it better. All Logos, Copyrights and Trademarks are property of their respective owners. PROVIDED STRICTLY FOR PERSONAL / HOME USE AND NOT FOR COMMERCIAL SALE / RE-SALE OR DISTRIBUTION! Permission to Mod: Yes with approval   Read More

VPX table by: Goldchicco & 32assassin vp9 table by: Ezepov Special Thanks to : 32assassin for helping me with this release and for sharing his passion, knowledge and time. Also built into the table is the JP Salas LUT selector. Hold down the LEFT MAGNASAVE and then press the RIGHT MAGNASAVE to cycle through the 10 different LUT brightnesses. LUT files thanks to Vogliadicane Hope you enjoy it and please leave constructive feedback or comments in the support topic and will try to make it better. All Logos, Copyrights and Trademarks are property of their respective owners. PROVIDED STRICTLY FOR PERSONAL / HOME USE AND NOT FOR COMMERCIAL SALE / RE-SALE OR DISTRIBUTION! Permission to Mod: Yes with approval   Read More

~START YOUR ENGINES~ VR Room Conversion of the lovely Checkpoint table by Goldchicco & 32assassin. Special thanks to Sixtoe for his awesome VR starting packages, and for doing final tweaks on the table to help with my noob oversights. Its my first VR conversion, and first time really digging into VPX editor, any constructive feedback is welcome! Used the Standard VR Minimal room, but updated images to fit the theme a bit more.   Special thanks to all those involved in the original VP9 table, and to goldchicco and 32assasin for doing the VPX conversion: GoldChicco and 32Assasin- VP9 to VPX conversion Bodydump, Requlem, Destruk and Batch for the VP9 version DJLunchBox: Physics, mechanical sounds, tweaking Sixtoe- For all things VR!   Read More

This is a conversion to FSS format made by me (Morttis). The original table is from SuperEd, thank you very much for this title made by you. Well, as usual, all the work was done through the tutorial videos of Nick Christopher (Arconovum), and everyone already knows how much I appreciate the support he has been giving me all this time (Thank so much Nick). The Art and general lighting of the BG was based on the B2S by SuperEd (thanks again). Well, the lighting of the BG I tried to reproduce what was done by Ed (Super Ed), but I believe it was not 100% (I don't have a B2S setup, so I don't know how this B2S works, because there is no such thing on the network. Good , I did the best I could, I think it was good, tell me). What's new in the FSS version? ... Well, here we go: - Insertion of BB and BG, with lighting based on the B2S by SuperEd; - insertion of the Day & Night code and other table lighting effects, giving a better visual effect and realism; -remade targets and hole targets in playfield; -new rubbers translucent; -new physics, based in JPSalas Arcade Physics 3.0 (the physics was redone, but it is not the full 3.0 physics of JPSalas, this table is original and had no real parameters to improve the responses or characteristics, I did what I thought was best for the style of the table). - and I think that's it. And thank you very much to all the VPX and table developers, without you the fun wouldn't be possible. Well, this is a great new original title that could not be missing in the FSS format. Enjoy it.   Read More

Who's ready to fly? Welcome to my VP10 F14-Tomcat table from Williams Pinball. This is a fast-paced Steve Ritchey pin from 1987. Its fast. Its furious. AND IT FIGHTS BACK! Special thanks to Ganjafarmer for allowing me to mod is already a great table. Also thanks to Cyberpez, rothbauerw, flupper, benji, brad1x, Iaakki and many others from the VP10 workshop. Please see the credits in the table script and thank these guys for their contributions. Lots of options: -Multiple VR rooms -Choose your color of GI lighting via RGB -Flasher domes intensity -Flipper bat style and color -Ball shields decals -F14 animated toy models -Custom back wall decals -Custom instruction cards -Various flipper performance tweak mods -Many others   More description info to come. Enjoy!     Read More

Austin Powers Table Tune-Up by members of VPin Workshop Discord. This was going to be just a fast rework for this fine table, but we ended up doing way more. Includes Desktop, Cab and VR versions in one VPX file as well as two POV files. nFozzy Physics: Benji, iaakki, Rothbauerw, Javier PF rework, graphics: iaakki, EBisLit, Tomate, Brad1x Inserts and lights: iaakki VR work & Various Fixes: Sixtoe Ramp plastics: Benji Fleep's Sound package integration: Benji 3D model changes: Benji, Tomate, Sixtoe Various script changes by iaakki, Javier Testing: people of VPin Workshop Discord, Rik Laubach We also included a new flipper trick with Rothbauerw to physics. It is called FlipNudge. One can use it for slowing the ball on the bat by spamming the other bat. Deadflip calls this "Fanning", but it was a lame name. This release wouldn't have been possible without the legacy of those who came before us including, most notably, Javier, 32Assassin, DStruct, Francisco666, Rom, ClarkKent and Ninuzzu Thank you to Flupper for 3D insert techniques and Flasher domes. Thank you to Fleep for the sound package. Thank you to Rothbauerw and NFozzy for physics. Thank you to Wrd1972 for bouncy standup targets.   Read More

Fog, The (Gottlieb 1979) PLEASE READ - IMPORTANT INSTRUCTIONS INCLUDED: This VPX is a re-skin / re-theme of BorgDog's Space Walk (Gottlieb 1979) table. If Gottlieb had made this table back in the day ... this is what it SHOULD have looked like - with some extra modern features. A couple weeks ago, my wife an I had our weekly "date night" and decided to watch John Carpenter's original The Fog (1980) on Blu-Ray after not have seeing it for many years. I had forgotten how good a movie it is. In 1980 it was labelled as a gorey horror movie by critics, BUT, much like Halloween, there is practically no gore at all - and by today's standards - it is VERY tame in comparison. It is more of a creepy 'ghost story' than a 'horror movie'. The film relied on darkness, likable characters, story, and jump scares for it's driving force - and because visual pinball is a great platform to preserve a better / basic time of our lives ... I wanted to make a Fog pinball. Originally shot and slated for release in 1979 (which is why I chose a 1979 table to start with as a basis) the movies release date was pushed back several months into 1980 so the film makers could re-shoot / add some additional scenes and elements to compete with other 'horror' movies of the time. I decided to go with the very last EM table Gottlieb released as my basic starting point, keeping all the original basic integrity of an EM functionality - with some new bells and whistles - but not too much that would destroy / overwhelm the player. Kiss = Keep it simple, stupid. I wanted to start with a BASIC table with very simple rules and easy to play so you can actually enjoy the game. Call me old-fashioned. After being granted permission by BorgDog to use his original Space Walk table - I went through and redesigned all the artwork for the playfield, plastics, apron, backglass, etc. Because there are some 'bugs' with how a totally scripted table / b2s work - with the assistance of Loserman76's and Rascal's scripting knowledge - we went through and completely updated the script driven table, fixing some existing bugs, and improving on some functionality, added a load of features, updated SSF, and overall player experience. Because I am a 'cabinet' pinball user - I relied on Rascal to make sure everything worked properly for Desktop users as any cab user would as well. As I said, this was not just a re-skin / theme - this was a overhaul and update. TABLE ADDITIONS: - - - - - - - - - - New playfield, plastics, backglass, etc graphics. - Added 13 LUT Brightness / Contrast Adjustments that can be done during Gameplay. - Added Flipper Shadows that can be turned ON or OFF at the top of the table script. - Added Ball Shadows that can be turned ON or OFF at the top of the table script. - Added Score and Settings saving to the VPX Users folder as text file instead of Registry. - Fixed Desktop SSF and B2S when playing in Desktop Mode. - Added Alternate Flipper Color options that can be changed at the top of the table script. - Adjusted Hundreds of Playfield Parts, Lights and Options for smoother gameplay. - Enhanced GI Lighting. - Fixed Scoring and Player error. - Added Startup, Game Play, and Gave Over music / audio - Each able to be turned ON or OFF at the top of the table script. USING LUT OPTIONS (VERY IMPORTANT): - - - - - - - - - - - - - - - - - - When you boot the table for the first time, the table might appear a lot brighter than it is intended. Hold down the LEFT MAGNASAVE and then press the RIGHT MAGNASAVE to cycle through the 13 LUT options. This bypasses the need of using the Day / Night slider. Depending on the resolution of your playfield monitor, everyones preferred LUT setting is different. When you cycle through the LUT options, when you select the one you prefer for your setup - it will automatically be saved when you exit / quit the table for the next time you play the table. You can adjust the LUT Option at any time when the table is loaded, even during gameplay. PLEASE NOTE: Pressing the LEFT MAGNASAVE will shut off the music as well. Simply press the RIGHT MAGNASAVE (without the LEFT MAGNASAVE pressed) to resume music playback. MUSIC OPTION: - - - - - - - - - - I opted NOT to use sound fx and dialog from the movie within the table itself, i.e.: hitting bumpers or slingshots, etc. I wanted to keep all the original EM sound fx and not overwhelm the gameplay. The addition of music and dialog to this table is done in the background ambient audio tracks to create a 'mood' and NOT a sound fx and music extravaganza. It successfully creates an overall tone for the table very well, especially if you dim your lights in the room and play practically in the dark. By default, the table is set up to play one of several random startup tracks, cycled Game Play tracks, and several random Game Over tracks. Instead of giving the option to turn ON or OFF all music, we split the options up at the top of the table script. You can adjust each type of music playback based on your preference. You can isolate and turn ON or OFF either the 3 options at the top of the script. If you want to temporarily turn off the music, press the LEFT MAGNASAVE and it will stop the CURRENT music track. You can then press the RIGHT MAGNASAVE (without the LEFT MAGNASAVE pressed) to resume music playback. During gameplay, and ONLY during gameplay, you can change the music track by pressing the RIGHT MAGNASAVE to switch to one of 6 music tracks. During actual gameplay is the only time this feature works. All music and audio has been properly balanced, equalized, and completely re-mixed so no audio 'interferes' with the sounds of the game itself. OPTIONS MENU: - - - - - - - - - - When NOT in gameplay (i.e.: no ball in the plunger lane or game started) you can access the Game Options Menu by holding down the LEFT FLIPPER for 2 - 3 seconds. This allows you to change the number of balls, free play or coin play, high score visible setting, or Replay Score settings. INSTALLATION (VERY IMPORTANT): - - - - - - - - - - - - - - - The install is fairly standard and straight forward, except for 1 IMPORTANT thing, the Music folder for VPX. In order to avoid the growing 'mess' of a million .mp3 files in your Music folder, the additional audio / music files for this table NEED TO BE INSIDE a folder called 'fog'. This reduced adding to the clutter and global warming problem. So when you unzip the music / audio for this table, the directory structure should look like this when installed 'Visual Pinball / Music / fog'. You will get an error when you boot the table if the mp3 files are simply dumped into the Music folder. DOF CONTROL: - - - - - - - I didn't want this new version of the table to compete or interfere with the existing Space Walk (Gottlieb) table. So I have renamed the cGameName and all associate reference to Space Walk to "the_fog_1979". Until DOF is updated with this new table to be included, but you just can't wait - open your DOFConfig.ini and copy the command line for SpaceWalk_1979, paste it to a new line - and change 'SpaceWalk_1979' to 'the_fog_1979'. FINAL NOTES: - - - - - - - Overall - the table turnout out exactly as I envisioned. The look, features, sound, music, graphics and gameplay are how "I" wanted it for my cab. This was all my preference, and may differ from your tastes of preferences, which is one of the reasons why I included multiple options. This was also a HUGE learning experience for me. I have never really touched scripting prior and only concentrated on the graphics for tables I was a part of making. I started with an EM table because I 'thought' it would be an easier learning curve. I was wrong, because EVERYTHING is driven from the script and not reliant on a ROM to do the calculations and workload. Even though I had some help with Rascal and advice from Loserman76 (the EM guru) on some more complex things I wanted to add / change with the table, I am very proud how it turned out and now have a lot more confidence in myself to make MORE tables of this caliber in the future. "Rascal who? Crank Caller, Crank Caller! Just kidding." - Inside joke. - Enjoy the table. FILES INCLUDED: - - - - - - - - - - I have included enough extra materials / goodies as a complete package to fill out every screen of your cab (if you are playing in a cab), with 2 wheels styles for PinballX and Popper front ends, RealColorDMD and Toppers or Over / Unders for LCD screens, Video Backglass for your front end (PinballX users should use the additional mp3 file as 'Table Audio' for backglass video), and some other things. Fog, The (Gottlieb 1979).vpx Fog, The (Gottlieb 1979).directB2S Fog, The (Gottlieb 1979) Flyer 1.png Fog, The (Gottlieb 1979) Flyer 2.png Fog, The (Gottlieb 1979) RealColorDMD - 128x32.avi Fog, The (Gottlieb 1979) Topper or DMD - 1280x390.mp4 Fog, The (Gottlieb 1979) Video Backglass.mp3 Fog, The (Gottlieb 1979) Video Backglass.mp4 Fog, The (Gottlieb 1979) Wheel 1.png Fog, The (Gottlieb 1979) Wheel 2.png Gottlieb-EM-Topper-Fog-Colors-Large.mp4 Gottlieb-EM-Topper-Fog-Colors-Small.mp4 CREDITS: - - - - - BorgDog - Original Space Walk table HiRez00 - Table Re-Theme / Re-Designs Rascal - Scripting, Updates, and Testing Loserman76 - EM Knowledge / Advice JP Salas - LUT Selector Enhancement - - - - - - - - - - - - - - Permission to Mod: NO - - - - - - - - - - - - - - This project took considerable time and I wanted to share it with everyone ... so "thanks" or comments in the support topic would be greatly appreciated. PLEASE NOTE: I create these image, videos, tables and backglass files for fun and for the dedicated VPX pinball users on this and other forum. I DID NOT create this for you to download as SELL, MAKE MONEY OR PROFIT ON ... You have been warned! DO NOT include any of these files with other downloads or projects without asking / getting permission first. All Logos, Copyrights and Trademarks are property of their respective owners. PROVIDED STRICTLY FOR PERSONAL / HOME USE AND NOT FOR COMMERCIAL SALE / RE-SALE OR DISTRIBUTION!   Read More

This is a Galaxy Quest re-theme of Pinball58's Space Shuttle (Williams) table. Credits: 2-screen version by PEandS1Ws Sound effects: https://www.zapsplat.com Sarris image: DopePope on Art Station https://www.artstati...m/artwork/n0dJK 3D Rocks wireframe: Icekazim on https://3dexport.com...ocks-288240.htm 3D Protector wireframe: John Hoagland https://sketchfab.co...oWwcc9spH3U7FiU Playfield image: Courtesy NASA   Read More

Re Upload of My Attack from Mars Black and White Edition Mod of the excellent Brad1X table, Credit also of course to JPSalas for the original table! I have re coloured all of the table images and added a few new elements as well as adding some shading to everything. Lighting has been adjusted to fit the BW look and I've also added a couple of extra flashers here and there. I've re drawn the apron to include the Limited Edition logo and some different cards, there are two versions in the image library, one with shadow (default) and one without so you can choose whichever you prefer. The DMD looks best in my opinion in green with this version so I have added a few lines to the script to change it to green by default, feel free to change as you see fit though You will also find a B2S in the zip that matches the table look along with a Wheel and DMD image to be used in the front end of your choice (thanks again to Brad1X for the amazing high res playfield to work with, and nullstep for helping with the ball shadow) I hope you like it :)   Read More

Designed to match the JP's Avengers table as it's more of a classic Avengers look.

Rules https://app.archbee.io/public/EVmEMIFxucwdyLqeP3P4a Thanks My lovely wife AtGames daphishbowl Rik Rob Avery Mr H Frank Heming PizzaTime DJRobX Nailbuster Harlan didcrabtree vpx team It's time to bring Pizza back to Pinball. Growing up the only places that had pinball were pizza joints and bowling alleys. I wasn't often at the bowling alleys (as you could still smoke in them at that point) so i played tons of pinball at pizza parlours. It always struck me as odd that there weren't any pinball tables about pizza when so many tables resided in pizza places. Plus pizza is awesome. The idea really started to grab me when I heard the local (Denver) band Pizza Time play their song "Pizza Time". First they are awesome, second it was the perfect link. A vision of a crusty pizza joint, pizza party took shape and I knew this table had to be made. Pinball Inspiration It's always important to me to build upon all that is great in pinball. It needs to be equal doses of innovation and homage as the rich history of pinball tables is something I find very worth building upon. In this cases the biggest inspiration was definitely Diner. PizzaTime coming to you with generous sponsorship from AtGames! Hey guys ScottyWic here, I wanted to take a minute to explain some really cool developments between myself (and my team) and AtGames. Earlier this year I was contacted by AtGames about their interest in supporting my efforts. I get a good number of requests to make tables for money and I've generally grown grouchy about these requests because this is my hobby and not a job. I make my tables because I love making things for people to play and love, that's the goal. So to be honest I wasn't even going to respond, but they piqued my interest saying "we want to help you get more tables out". And well as you guys know I am not able to make many tables, as they take an unbelievable amount of hours (many times 500+). We got to talking and it was evident right from the start that this was a different conversation. AtGames wanted to financially support bringing on others to help me finish my games AND allow me to still give them away to the VPX community. Wait, what? Yeah you heard me right. At this point I said, ok, now we're getting somewhere. What if I could release multiple games a year out to you guys, and not have it leaving me totally burnt out every time. This I was interested in. So we decided to give it a run and work to finish off my PizzaTime table which had been itching to be completed for years. It was at the point where I needed MANY hours to code out the rules completely and I was dreading it. Daphishbowl came alongside me with AtGames funding to code through the rules. As you all know, he is brilliant, and it went amazingly well. We now come to the community with the sponsored table, PizzaTime. A strange and silly table that comes out exactly as my vision had been (as strange as that vision might be). And I hope you love it like I do. On Community Negativity There has been a general negativity in the VPX community when it comes to anything involving money, and I definitely understand these feelings. What I hope to illustrate with this partnership is that there are really great individuals out there looking to help lift this community up for the good of everyone. I believe the digital pinball market is about to see a huge boom, and this is exciting for me as my tables will be played by more and more people everyday. I still hold that my dream is just to walk in and see kids hammering away on a game I made and I feel that's getting closer and closer to reality every day. But I hit the same road block, I can't spend 500 hours on a table by myself and make very many, I need help, and not like "I'll help a bit on the weekend" help, I need 40 hrs a week help. So I ask that you guys take some time to play PizzaTime and know that this table would most likely never have come out without the help from AtGames. They are truly great people that are trying their best to be as delicate and understanding to this community's feelings about financial investments as possible. And with this help I hope to be able to finish more tables with even greater quality than before and less strain on my personal and family life. Thanks for taking the time to read this and for hopeful openness to this new exciting partnership opportunity for me and honestly for us all.     Read More

This is a remake from the older Atari Centipede Pinball table. A lot of changes on this table. Anyone can mod this table without permission. (Note: Please report to me if anything is broken. ) There two versions. Standard version without the extra stuff. Color balls with extra stuff.   Read More

Nine Inch Nails Included in the zip: vpx file a Tarcisio Wheel image Ultradmd files (goes in tables folder where the vpx goes) Backglass Video .mp4 and music .mp3 Note: The backglass is a video (.mp4) its to used with your front end so keep the bg display set to on when table launches and it will play with the table. You can also use jogrady7's Generic Pupack get it here - Generic Puppack Backglass Special shout-out to GoldChicco! Thanks you again for all your help with my questions, you the man! Authorized MOD of Black Sabbath VPX by Goldchicco VP9 original release by: Aaron James and Destruk   Read More

VPX Conversion by: Goldchicco & 32assassin vp8 table by: TAB vp9 table by JP Salas Thank You to JP Salas for giving me the OK to proceed with this conversion and for those kind words when I presented the table to him: It looks good. Still it doesn't have the right proportions. I made the table 13 years ago, when the screen where 4:3, cabinets didn't exist, and VP didn't have any zoom capabilities. So I made the table as big as posible, cutting away the apron as much as I could  As you can see the graphics where 1024x1024, since that was the max size VP could handle." Special Thanks to : @32assassin for helping me with this conversion and for sharing his passion, knowledge and time. @vogliadicane for the LUT file @sneakily1 for the environmental image I borrowed from his personal collection @movieguru for upscaling and enhancing images This conversion carried over well known 'issues' as described above . I decided  to share it anyway with the community, so consider it as blueprint for a new completely rebuild, feel free to Mod or share any improvements. Hope you enjoy it the way it is and please leave constructive feedback or comments in the support topic and will try to make it better. All Logos, Copyrights and Trademarks are property of their respective owners. PROVIDED STRICTLY FOR PERSONAL / HOME USE AND NOT FOR COMMERCIAL SALE / RE-SALE OR DISTRIBUTION! Permission to Mod: Yes without approval   Read More

This is the 100th conversion to the FSS format by Morttis. The original table was made by GTXJoe and PinballFan2018, fantastic work, thank you. I chose this table to be my hundredth FSS conversion because I like it so much and your work was already great, so I wanted to make it even better, I hope I got it. This modification was made on version 1.4 of the table, I explain: The FSS format does not support UltraDMD and PulpSystem, so version 1.5 would not be compatible with the FSS format. In order to avoid conflicts during execution, I thought it best to use version 1.4, updating the entire graphic part inserted in version 1.5 of the table, and still has many other graphic upgrades like all version when running the table, including new plastics made by Eric (EBisLit) and trained by the author of the table (GTXJoe), thanks for that, the plastics were great. So this version is 1.4+ (plus). Everything that has been modified: * Restructuring of all sides of the table, for its elevation and make it look more like the real table; * insertion of insidearts and backpain art in the playfield; * insertion of BB and BG; * new rubbers (translucent); * BG art extracted from B2S by GTXJoe (thank you, it looks great); * insertion of RGB lighting in the speakers (it was not perfect as I would like, I was not able to make the programming work fulltime since the table is turned on, it only works while the ball is in play); * insertion of several decals in the playfield (bumper, flippers, cannons and targets); * insertion of all FSS code (by Arconovum, thanks man) for conversion to the FSS format itself; * insertion of the 4 numeric displays in the BG (thank you very much Nick for your work dedicated to this project, the result was great); * update of all table physics, based on JPSalas kit (Arcade Physics 3.0, thanks for this job man); And thanks Terry Red for the work you did on version 1.5, despite not using your version for this conversion, your work was fantastic, and I would really like to be able to use PulpPack on FSS tables, I hope this will be possible soon. Hope you like it. And thank you very much to all the VPX and table developers, without you the fun wouldn't be possible. TABLE MUSIC (Reproduction of the guidelines given by Terry Red, in the post of the original table): This VPX table release comes with the free song from the TNA soundtrack available here: http://www.scottdanesi.com/?page_id=19 - for the full music experience, you will need to BUY the TNA Album and convert the songs from FLAC format to mp3 format with a tool like this:  https://www.freac.org/ - rename all mp3 files to TNA1.mp3 through TNA10.mp3 and replace the existing mp3 files. (Scarlet.mp3 is not used) - please show Scott Danesi your support and thanks for creating an awesome pinball game and for making the music available for us to buy.   Well, this is a great new title that could not be missing in the FSS format. Enjoy it.   Read More

This is a conversion to FSS format made by me. The original table is from 3rdaxis, thank you very much for this title made by you. Well, as usual, all the work was done through the tutorial videos of Nick Christopher (Arconovum), and everyone already knows how much I appreciate the support he has been giving me all this time (Thank so much Nick). The Art and general lighting of the BG was based on the B2S by STAT (thanks, for this job). What's new in the FSS version? ... Well, here we go: - Insertion of BB and BG, with lighting based on the original machine (thanks to the fantastic work of STAT on B2S, thank you); - insertion of the Day & Night code and other table lighting effects, giving a better visual effect and realism; -updated physics based in Arcade Physics 3.0 by JPSalas (thanks, fantastic job man). - and I think that's it. And thank you very much to all the VPX and table developers, without you the fun wouldn't be possible. Well, this is a great new title that could not be missing in the FSS format. Enjoy it.   Read More

UPDATE: Version 1.1.1.  Relax in a 1970's themed room and have a game of Triple Strike!   This table has not only been updated to VR, but I've finally fixed some issues that have been bothering me since it's original release 10 years ago.  I received a lot of help from Steely and Rascal while making this VR room, THANKS very much to the both of you..  Steely made the cool Lavalamp and the Skybox, and Rascal motivated me with tough love.  It is also Rascal that you'll see poking his head over the fence now and then. This table has really become a community project over the last 10 years!  I'd like to thank the following long list of contributors.. Thanks to Randy Davis, The VP development team, and Caligula for making VPVR possible! Thanks to 3rdAxis for the inspiration to do this, and also letting me steal some of his models for this project. Thanks to CKPin for his help with the update from VP9 to VPX in 2017, along with his own upgrades... (Options menu, 3/5 ball game, new flippers etc).   Other contributors at this time included Arngrim, rosve, BorgDog, jesperpark, & Haunts. I received help on the original VP9 table from: Greywolf, Noah Fentz, UncleWilly, Wizards_Hat, Rascal, Bob5453, JP Salas & Sabbat Moon. Enjoy!   Read More

Next up Red Hot Chili Peppers! Included in the zip: vpx file a Tarcisio Wheel image Ultradmd files (goes in tables folder where the vpx goes) Backglass Video .mp4 Note: The backglass is a video (.mp4) its to used with your front end so keep the bg display set to on when table launches and it will play with the table. You can also use jogrady7's Generic Pupack get it here - Generic Puppack Backglass Special shout-out to GoldChicco! Thanks you again for all your help with my questions, you the man! Authorized MOD of Black Sabbath VPX by Goldchicco VP9 original release by: Aaron James and Destruk   Read More

This is a conversion to FSS format made by me. The original table is from JPSalas, thank you very much for this title made by you. Well, as usual, all the work was done through the tutorial videos of Nick Christopher (Arconovum), and everyone already knows how much I appreciate the support he has been giving me all this time (Thank so much Nick). The Art and general lighting of the BG was based on the B2S by HauntFreaks (thanks, for this job). What's new in the FSS version? ... Well, here we go: - Insertion of BB and BG, with lighting based on the B2S by HauntFreaks (thanks man); - insertion of the Day & Night code and other table lighting effects, giving a better visual effect and realism; - and I think that's it. And thank you very much to all the VPX and table developers, without you the fun wouldn't be possible. Well, this is a great new title that could not be missing in the FSS format. Enjoy it.   Read More

Grand Prix (Williams 1976) EM A few months back, forum member aka "Shark's Mouth" found a real Grand Prix in the back of the building he was working at. He managed to take about 150 hi-resolution photos of the entire playfield, plastics and backglass (I mean just about every inch) - and he posted those photos on this site, hoping someday someone could use them to make a clean new VPX table from them. I stitched them all together and embarked on a complete redraw of the playfield, plastics and backglass - that took a couple weeks on and off. Loserman76 (being the EM guru that he is) built a brand new table using the new playfield as a guide - that looked and played great. Because the playfield and plastics were a new redraw - no matter what lighting approach I took within VPX - the lighting always looked FLAT and not realistic. Enter Bord ... Bord imported everything into Blender and "enhanced" all the lighting and rendered out a beautiful and ultra realistic output. I am a big fan of 60s and 70s EM tables and I wanted to do it justice since we started with such great resources. This final version is a example of great collaboration between all involved. Included with this download is the new VPX version of Grand Prix, new Backglass, and new wheel image. Also included is an mp3 file named: Grand Prix (Williams 1976) EM - F1 Race Ambience.mp3. This is a subtle sound effect track that you can load into your front end system (PinballX) that will play before the table is loaded. At the top of the table script you can choose if you want the ball / flipper shadows ON or OFF. I suggest you turn them OFF if you a using a slower system. Also built into the table is the JP Salas LUT selector. Hold down the LEFT MAGNASAVE and then press the RIGHT MAGNASAVE to cycle through the 9 different LUT brightnesses. Hold down LEFT FLIPPER for 3 - 4 seconds BEFORE starting a game to access the build in Game Menu to change the game options. - Enjoy! CREDITS: - - - - - - - - Loserman76 - Complete Table build + Scripting HiRez00 - Playfield, Plastics, and B2S ReDraw Bord - Blender Rendering and other Enhancements Shark's Mouth - All real table reference photos Schreibi34 - Apron and Pop Bumper Mesh MLager8 - Apron ReDraw JP Salas - LUT Selector Enhancement - - - - - - - - - - - - - - This project took considerable time and I wanted to share it with everyone ... so "thanks" or comments in the support topic would be greatly appreciated. PLEASE NOTE: I create these image, videos, tables and backglass files for fun and for the dedicated VPX pinball users on this and other forum. I DID NOT create this for you to download as SELL, MAKE MONEY OR PROFIT ON ... You have been warned! DO NOT include any of these files with other downloads or projects without asking / getting permission first. All Logos, Copyrights and Trademarks are property of their respective owners. PROVIDED STRICTLY FOR PERSONAL / HOME USE AND NOT FOR COMMERCIAL SALE / RE-SALE OR DISTRIBUTION!   Read More