Visual Pinball Tables Area (748)

Greedo's Cantina Pinball (Original 2019) v1.0 VPX table by JPSalas Graphics and Sound Mod by Xenonph and Cryptdoctor21 I used JPSalas' Skateball (Bally 1980) v1.03 to make this mod. I first would like to thank JPSalas for allowing mods without permission. I would also like to thank him for making a great table!! There is much more important info on original download page. He put in alot of time and work on the original table, and it is appreciated!! So if you like this mod, I would encourage you to thank the original author of the table, as I have only made a few changes! Original Table... https://www.vpforums.org/index.php?app=downloads&showfile=13142 Find ROM here... https://www.vpforums.org/index.php?app=downloads&showfile=674 IPDB... https://www.ipdb.org/machine.cgi?id=2170 THIS TABLE IS DEDICATED TO MY BROTHER DAN!!! I also would like to thank Cryptdoctor21 for adding the red border on plastics, and he also reshaped the plastics. I also would like to thank him for helping make the dB2S Backglass. I just supplied the pic, and he made all the snippets. GREAT JOB!! I also would like to thank Flupper for his great Flasher resource table!! I would also like to thank Thalamus for telling me how to use resource tables!! I also would like to thank JPSalas, Allknowing2012 and Gtxjoe for teaching me how to add timers to script! I also would like to thank DJRobX, STAT, Gtxjoe, and nFozzy, for helping me shorten my StopSounds and PlaySounds script commands. (They each wrote out an example, and between them all, I was able to figure it out!! BIG THANKS!!!) I also would like to thank Steve "Slydog43" for which these VPX mods would not be possible!! I also would like to thank Joey2001 for making a wheel image for cabinet users which you can find here... https://www.vpforums.org/index.php?showtopic=41637#entry421980 Version 1.0 Added 356 Alien voice sound effects. (All from the Star Wars Universe) 1 of 23 Jawa voice sound effects is played on lower rollovers. 1 of 177 Alien voice sound effects are triggered by kicker, and played every 8 seconds during attract mode. 1 of 156 other Alien voice sound effects are played on drain of ball. Over 60 other Star Wars exclusive sound FX. Added option in script to change the in game music. (12 songs in total.) 0= no in game music. (The in game ambience is still played.) 1= This is Default setting and is set to only play 3 original songs that have no singing in them. 2= Plays the above + the 2 original songs with singing. 3= Plays the above + 7 more unoriginal songs. (Unoriginal = wasn't in movie.) There are 1 of 9 Cantina ambience sounds played while waiting to plunge ball, or game over. Left Magna-Save toggles 1 of 11 bumpers. (These are just generic bumper images, and will be updated soon!!) Buy-In button toggles GI Lighting Colors. 3 colors available including regular(white) default, Red, and Blue,(Blue is default on psychedelic mod.) Place music in your music folder located where you installed Visual Pinball. (DO NOT PLAY THE MUSIC AS THIS MAY ADD A TAG TO MP3 AND RENDER MP3 USELESS!!) Be sure to restart table after starting table for first time as flippers may stick on first start of table on your setup. (You should do this with all new tables you are trying out for first time to avoid weird table behaviour.) All pics, trademarks, Logos and sounds belong to their respectful owners. This table is for personal home, and non-commercial use only. This table should be used for educational purposes only.. Hope you enjoy!!   Read More

The last Gottlieb to feature a manual ball lift, Cross Town has great art and some fun features such as a scoring ladder that lights awards and a sliding subway door on the backglass. Because this is a one player game, all five (or three) game balls are loaded into the ball lift trough at once. We worked really hard to get the trough and ball lift working as realistically as possible. @Scottacus did all the scripting, menu and sound with his usual excellence and attention to accuracy. He went the extra mile to make sure "random" awards were lighting on the correct score reel position for each game variable. Changing number of balls and conservative/liberal post settings gives you real time results on the playfield. Really cool stuff. Thanks to everyone who beta tested this project and to the Pinsiders that provided PF scans and tested features on a real Cross Town to ensure accuracy. Requires 10.6 or higher. B2S included in the zip.   Read More

1986 Williams Grand Lizard VPX Beta 10.6 rev. 3541 A 3rdaxis and Slydog43 collaboration. A very special thanks to JP Salas and Rosve for their VP9 versions Thanks to Sliderpoint and Ben Logan for play testing and suggestions, GTXJoe and DJRobX for scripting help and finally the entire community for everything else during this endeavor. I've included the original plastic set but also have a mod set to select until we get a higher resolution of the factory set in the future Table options (Located in script) include Custom Music, Side Blades, Plastics, Flipper Bat color and Flipper Rubber colors, Rubber colors, GI color, Center Post, and Out-lane Post position (difficulty) Table has an AutoPlay feature, toggle on/off withthe "A" key. Instructions: * Select the number of players desired then use the "A" key to engage and toggle AutoPlay on and off. * Use the "S" key to toggle on and off Autoplay's sounds and special effects during Autoplay. * Use the "C" key to toggle on and off cheating during Autoplay (Game will play indefinitely no scoring) * Status Lights:(Just Above Apron To The Left) Yellow=(Autoplay On) Blue=(Sound On) Green=(Cheat On) <<<<<***************  WARNING!!!ONCE "CHEAT" IS ENABLED SCORES WILL NOT BE SAVED! WARNING!!!********************>>>>> Also, apron credit light will flash and plunger will shoot when AutoPlay is activated. A new game or additional players added will deactivate AutoPlay.   Read More

Raven Pinball, this project started as a mod of Rascal's VPX conversion and the resources started to flow in so it got a complete facelift.  It all started with a set of new posts, targets, bumpers, plastics, etc.  Once the playfield was populated, Bord created an amazing new primitive ramp for the top left and the large clear one in the center.  Then I found a cheap helicopter shell online and Bord did his magic to make it come to life on VPX.  Great job on the modeling.  The script needed an upgrade to match so Bord and 32Assassin came up with something to make the table all come together and act just like the real thing. Special thanks to all that contributed (in order of completion): Rascal for getting this started with your VPX conversion Bord for all the primitives, work on the lights and script to get this playing like the real table.  For the amazing helicopter model and all the testing to get it working great.  And lastly for putting up with me! 32Assassin for all your work on the script and for all the advice along the way Randr for all your time testing and getting this looking and playing great. Arngrim for all you work updating the DOF Thalamus for all your help testing and improvements on the sounds and gameplay And lastly to all those that paved the way for this table with your work on previous versions like ICPJuggla, GTXJoe, Wildman, Dark, and others.  Hope I didn't leave anyone out. Lastly don't forget to update your DOF and look forward to a mod of this table if you don't like the 80s chick...   Read More

I'm getting tired of looking at this thing, so I'm throwing it out to you all to break and do whatever with. :) Some time back I ran across some decent photos of a stripped/NOS playfield for Silver Slugger, did a quick look around and didn't see a VPX release, so started building it up.  Sometime later while looking for plastics I ran across bodydumps early vpx WIP of Silver Slugger that included redrawn playfield and plastics, and I said "dammit". since I had put a fair amount of work into my build I decided to keep on with it, and eventually got in touch with bodydump who gave me permission to use his resources.  since the playfields were not a direct match I decided to stick with mine instead of moving everything around, but it was fairly easy to move around bodydumps plastics to match my setup. first a couple thank you's and kudos: @bodydump, thanks for letting me use your resources, very much appreciated @DCrosby, thanks for the upscale/cleanup of my playfield @Schreibi34, thanks for the new kicker primitives @bord, thanks for all the blender instruction So speaking of blender, I'm still learning, and this includes my first try at some reflections on walls.  Not a lot of them, but just the most visible of the shiny metal walls.  Also did another set of GI shadows in blender. I'm sure none of these are as good as others are capable of, but I think they turned out OK, and I'm learning something new (they say that's good for us old people's brains). Table has a few options near the top of the script for turning flipper and ball shadows on and off and for choosing the apron card colors (stock black on white or inverse white on black). FS is setup for my cab which has the playfield in windows portrait mode, I'm sure you all can figure it out, or at some point someone will post a wrong landscape pov file. Wildman has a pretty nice db2s over on VPU  http://vpuniverse.com/forums/files/file/2638-silver-slugger-premier-1990/     Read More

After almost 8 months it's finally done! A very special thanks goes out to Herweh!! Withou him this table wouldn't be half as good!! Thanks my friend! Don't miss Herwehs "Additional GI" switchable in the script! More GI-OFF for those who enjoy it! I hope you guys have fun while playing! Credits: - Herweh for scripting everything on this table, including kickers, animations, airball, additional GI and SSF sounds. He also fixed stuff like the trough and the tilt script! Without him this table wouldn't be half as good!!! One of the best and a great guy!! This is also your table!! Thanks!!!   - 32assassin and BodyDump for bringing this Table to VPX. I used their table as a base. - Kiwi and Destruk for a great hint when 'Tilt' didn't want to work the way it should - RothbauerW for some code of his manuel trough in 'No Good Gofers' - Bord and BorgDog for images, testing and all kinds of help! - BorgDog for moving spinner rod - Flupper - cycles insert material - Thalamus for playtesting and screenshots - Ninuzzu - BallShadow - Whoever made the flipper shadow - Last, and definetly not least the VPX devs!! Thanks guys!   Read More

"ATTACK OF THE CLONES" WAVE Top Hand (Gottlieb 1973) https://www.ipdb.org/machine.cgi?id=2582 Capt. Card clone Artwork by GNance Backglass & wheel included in the ZIP Built using VPX 10.5 since I don't do betas   Read More

"ATTACK OF THE CLONES" WAVE Spot Pool (Gottlieb 1976) https://www.ipdb.org/machine.cgi?id=2316 Bank Shot clone Artwork by GNance Backglass & wheel included in the ZIP Built using VPX 10.5 since I don't do betas   Read More

"ATTACK OF THE CLONES" WAVE Rancho (Gottlieb 1965) https://www.ipdb.org/machine.cgi?id=1917 Cowpoke clone Manual ball lift is "A", game start key or right magna save Artwork by GNance Backglass & wheel included in the ZIP Built using VPX 10.5 since I don't do betas   Read More

"ATTACK OF THE CLONES" WAVE Poseidon (Gottlieb 1978) https://www.ipdb.org/machine.cgi?id=1852 Neptune clone Artwork by GNance Backglass & wheel included in the ZIP Built using VPX 10.5 since I don't do betas   Read More

"ATTACK OF THE CLONES" WAVE Lucky Strike (Gottlieb 1975) https://www.ipdb.org/machine.cgi?id=1497 Gold Strike clone Artwork by GNance Backglass & wheel included in the ZIP Built using VPX 10.5 since I don't do betas   Read More

"ATTACK OF THE CLONES" WAVE High Seas (Gottlieb 1976) https://www.ipdb.org/machine.cgi?id=1175 Ship Ahoy clone Artwork by GNance Backglass & wheel included in the ZIP Built using VPX 10.5 since I don't do betas   Read More

"ATTACK OF THE CLONES" WAVE Hi-Lo (Gottlieb 1969) https://www.ipdb.org/machine.cgi?id=1184 Hearts and Spades clone Artwork by GNance Backglass & wheel included in the ZIP Built using VPX 10.5 since I don't do betas   Read More

"ATTACK OF THE CLONES" WAVE Harmony (Gottlieb 1967) https://www.ipdb.org/machine.cgi?id=1127 Melody clone Artwork by GNance Backglass & wheel included in the ZIP Built using VPX 10.5 since I don't do betas   Read More

"ATTACK OF THE CLONES" WAVE Grande Domino (Gottlieb 1968) https://www.ipdb.org/machine.cgi?id=1127 Playmates clone Artwork by GNance Backglass & wheel included in the ZIP Built using VPX 10.5 since I don't do betas   Read More

"ATTACK OF THE CLONES" WAVE Galaxie (Gottlieb 1971) https://www.ipdb.org/machine.cgi?id=978 Dimension clone Artwork by GNance Backglass & wheel included in the ZIP Built using VPX 10.5 since I don't do betas   Read More

"ATTACK OF THE CLONES" WAVE Fun Fair (Gottlieb 1968) https://www.ipdb.org/machine.cgi?id=964 Fun Park clone Artwork by GNance Backglass & wheel included in the ZIP Built using VPX 10.5 since I don't do betas   Read More

"ATTACK OF THE CLONES" WAVE Elite Guard (Gottlieb 1968) https://www.ipdb.org/machine.cgi?id=780 Palace Guard clone Artwork by GNance Backglass & wheel included in the ZIP Built using VPX 10.5 since I don't do betas     Read More

Original description, see changelog for changes Prompted by a post from drothste12 on vpforums, a whole gang of VPers jumped in to get this table done.  STAT started it off with the initial build and coding of the gameplay and rules and figured out how to do a rotating ball shooter turret with great advice from the forum.  PinballShawn owns the real table and very helpfully provided measurements, gameplay rules, and videos of how it all works, table probably would not be done without all his info. I jumped in when STAT got to busy to finish it up and I resized the table and all it's parts and objects to correct size, and finished up the coding with added features.  Hauntfreaks took all my and STATs initial images and made them all much nicer (he has a way with things like that). Basic idea of the gameplay is hit the balls to clear the rack.  A great part of the fun is you can't actually see the ball most of the time it's in play. The right flipper or the plunger button shoots the ball (real table has no plunger so just right flipper) as the turret rotates. Clearing the rack adds the listed bonus and give you another ball (well really the same one, but continues to play).  PinballShawn says the game is much better with 2 players as you can steal racks the other player doesn't complete. There are a couple of gameplay options available by holding down the left flipper before starting a game (thanks to loserman76 and gnance for the idea). directb2s file is included in the download.   Read More

Put on your polyester leisure suit and slip on those go-go boots because you'll soon be dancing with the grooviest Williams’ Swinger table from 1972. This is a 2 player version of their 4 player table Fun-Fest released early the following year. I was inspired to make this table for my virtual pinball cabinet after my friend bough one to restore. I started making this table over a year ago for VP 9.21, but I only recently found the time to converted it for VPX v10.6. Artwork was hand drawn referencing photographs of an actual table. Cabinet frontend media files, B2S backglass and POV files are included. I designed this table for use in a cabinet with three screens. Version 1.1 now supports desktopmode! Press F6 to change game settings. I hope everyone enjoys this table!   Read More

There's no end to the fun at this Fun-Fest. If you thought swinging with two was fun, then imagine getting groovy in a festival of fun with four players with this great table from Williams! Table, DirectB2S backglass and front end media are included in the package. Support for desktop mode is in this initial release.   Read More

This is a mod of jbg4208's VPX Spanish Eyes build. New lights, meshes, plastics, shadows, physics etc. Thanks to @jbg4208 for permission to mod and to all those that contributed to his excellent original build: @BorgDog @Popette @Hauntfreaks   Read More

This table was another group effort by a bunch of great volunteers.  I started this table getting a nice playfield image off a guy on pinside.  After some much needed scripting help from 32Assassin and Bord, we had a semi playable table.  The project stalled and then Randr stepped in to save the day.  He came up with some amazing target primitives, the animated pitching assembly, a bat primitive, rubber side walls, the upper deck primitives, lights and an awesome script to tie it all together.  After all that was compiled, I had a lot of support from pinsiders sending great pics of all the graphics which made everything come together nicely. Randr took the script and added all sort of small touches that enhanced the playability of the table as well as the visual aspects.  There were two versions of this table, a white cabinet with black plastics, and an all green cabinet with green plastics.  During gameplay, pressing the "I" button toggles between the two versions. Great addition Randr When it comes to gameplay, the original table chose randomly between three pitches in single player mode; fastball, changeup and curve. In single player simply pitch with the left flipper and bat with the right flipper and the game will select the pitch.  In 2 player mode, you can select the different pitches to throw by hitting the left flipper for fastball, double tapping left flipper for changeup and left magnasave for curve ball.  The original game had a magnet under the table to affect the curve ball.  Special thanks to Rothbauerw for all the hours of work figuring out how to add that in there and testing and perfecting the pitching, thanks!  There are also options at the top of the script if you want to change up the pitching settings. Again, thanks to all those that contributed to this table and for all those that have contributed to the previous versions and all the supporting media to Make Virtual Pinball Great Again!   Read More

Gottlieb's Royal Pair Add a ball version of Top Card made for export to Italy - there was not an add-a-ball version made for the USA There are 2 versions included in this ZIP - 1 with 2 pop bumpers and the other with 3. Both were prevalent based on the information I could find. I think the 2 bumper version makes the game a little easier to get high scores because of the top center stationary target being a clear shot. Artwork by GNance Backglass & wheels included in the ZIP Built using VPX 10.5 since I don't do betas   Read More

Italian clone of Jungle King Artwork by GNance Backglass & wheel included in the ZIP Built using VPX 10.5 since I don't do betas     Read More

Add-a-ball version of Jungle/Wild Life Artwork by GNance Backglass & wheel included in the ZIP Built using VPX 10.5 since I don't do betas     Read More

Add a ball version of Groovy/Crescendo made for export to Italy - there was not an add-a-ball version made for the USA Artwork by GNance Backglass & wheel included in the ZIP Built using VPX 10.5 since I don't do betas   Read More

Gottlieb's World Series This is the add-a-ball version of Grand Slam Artwork by GNance Backglass & wheel included in the ZIP Built using VPX 10.5 since I don't do betas   Read More

Gottlieb's Grand Slam - yet another baseball table for y'all Images by GNance Backglass & wheel included in the ZIP Built using VPX 10.5 since I don't do betas   Read More

Bally's 1965 Magic Circle had a relatively low production run of 580 units. It is a Ted Zale game with a simple but difficult objective: complete the Magic Circle to increase scoring opportunities and shoot the top gate to collect horseshoes and win a free game. The horseshoes carry over game to game. rothbauerw scripted this project with his usual excellence and eye for detail. Without him this would be nothing but a pretty picture. This is an era of game that is woefully underrepresented in VPX. It was cool to explore and model all the unique details from this era. The lockdown bar has coin slots on the top and the side rails have lockdown cutouts for accessing the underside of the playfield. Cool stuff. Hope you have some fun with it. B2S is included.   Read More