Visual Pinball Tables Area » VPX Tables (685)

Freddy A Nightmare on Elmstreet (Gottlieb 1994) Credits: Original VPX table by jipeji16 and noted previous contributors are: JPJ - Team PP - Arngrim - Unclewilly - Grizz - Hassenchop - Hauntfreaks https://vpinball.com/VPBdownloads/freddy-a-nightmare-on-elm-street-gottlieb-1994/   Dark's MOD: What's new? -New 3D plastic ramp + 3D pre-rendered texture. -Mostly new Wire ramp (I kept some parts of the old one). -Re-worked lighting for Freddy + re-worked materials for Freddy. -VP ramps adjusted a bit to closer match photos I had, also wire ramp friction increased a bit to slow travel time to a more realistic speed. -New ball image/lighting -adjusted POV to match new plastic ramp texture -adjusted Freddy 'Glove hand' slightly. Notes: Do NOT adjust the pov unless you really feel you must, the POV is optimized for the 3d pre-rendered texture of the plastic ramp.  Feel free to adjust if you must but be aware it will start to throw off the look of the ramp. IF YOU WANT GOLD WIRE RAMPS: In the VP editor select the wire ramp, change it's material from "Metal Wire JP1" to "Metal Wire JP1-GOLD". Most photos of the table I have feature a golden-like Wire ramps, though personally I prefer the standard chrome/silver, so I leave the option to you. Note that this version/mod was made for cabinet users, so I haven't even tried DT version.  I found that I could get a higher level of lighting/detail on Freddy using a metal material, so he might look weird from a DT perspective - if he does just un-check metal in his material - I think it should be okay though.  Lighting and pre-rendered texture on plastic ramp will not be optimized for DT perspective - sorry. This is pretty much just a visual update,  I thought this table was fairly well done but could benefit from my own personal touch.  It pretty much just started with me adjusting stuff for Freddy to try to get him to look a bit closer to how I had imagined him on the table and I had no plans of modding the table for release.  However as I started to get more involved I thought with this much work involved I might as well share this mod. Hope you like it, appreciate it, if not, there's always the previous version to go back on or siggi's mod! :) That's it folks,  just want to thank all the previous contributors and a special thanks to rothbauer for general help.   Read More

Recreation of the Williams classic from 1994, "The Flintstones". By the development team of g5k, 3rdaxis, DJRobX and Dark. Developed using 10.6, install the final release of 10.6 to play. If you have not installed 10.6 final you will get script errors. Do not disable playfield reflections inserts will not display correctly and will appear black. You must have dynamic playfield reflections enabled in video options or inserts display incorrectly and will appear black. Script options are available, mainly to help performance. Magna save to cycle through LUTs, if you want to set a new default LUT use the script option. Includes Surround Sound Feedback (SSF). ZIP includes DMD colorisation files (courtesy of Slippifishi and Wob). ZIP includes Backglass files, original and cartoon version Thanks for some stuff from the vp9 version, DOF code etc (thanks to JPSalas and those who helped make that original one). Special thanks to Dark who provided the Bronto, Dictabird and cleaned up the 3D scans of building toys. To SlyDog for reference of his real machine and putting up with me. To Dave C for his support. Other thanks to the colorisation team Slippifishi and Wob and those in the community who supported this development and help make it possible. Final big thanks to the VPX and VPM development teams. What a great fun game... hope you all enjoy - PROVIDED STRICTLY FOR PERSONAL USE AND NOT FOR COMMERCIAL SALE OR DISTRIBUTION. PLEASE DO NOT RE-DISTRIBUTE.   Read More

The Mighty Pharaoh has long been dead, and the decades, centuries, and ages that have passed were like whispers in the wind, sifting through the sands of time. With quiet strength, the Pharaoh's tomb did stand in solemn testimony to the mighty ruler of Egypt then, but alas, the dark side of what once was, has revealed itself inside the tombs. His people believe that this dark presence is none other than the Pharaoh himself, risen from the dead, in some form, to exact revenge on all who enter. As for the skeptics? Well, let's just say that they have all mysteriously "disappeared", lost forever, inside the tombs. So... do YOU dare enter the Mighty Pharaoh's tomb... again? Be warned, for this is... PHARAOH - DEAD RISE! Thank you to: *xenonph & *HiRezOO for the awesome PF skull which inspired me to create this! *JP Salas for creating the script for the torch flickers and your awesome knowledge! *BorgDog for suggesting to try flashers. Never used them before and now I can't stop! lol Hello everyone! Pharaoh is a great table but I wanted to create a bit more sinister version, by adding a little more fun, to an already exciting table. I searched through alot of videos online trying to replicate the best I could for most of the aspects of the real machine. I hope that I honored it well. Thank you again for allowing me the privilege to share my work here. I hope you all have as much fun playing it as I did making it. Don't forget about the end game bonus with 2 or more players, and of course the MAGNA-SAVES! Pharaoh - Dead Rise uses the standard rom pharo_l2. Enjoy! Your friend in Pinball, Watacaractr Note: Pharaoh - Dead Rise is designed as a 5 ball table. After installing you'll notice that the default is 3 balls. You can change it to a 5 ball game, or change other things, by adjusting the Williams 7 System. 1. Press 9 to enter diagnostic mode. The displays should go blank when you enter this mode. 2. Press 8 to enter test mode. 3. Press 7 and then press 8 to see 01 in the credit display. 4. Continue to press 8 until you see 04 in the credit display and 30 in the match/ball in play display. 5. Press and hold the 1 key to select the number of balls you want. The value will increment by 1 while you are holding in the 1 key. When you reach the number of balls you want to set it to, release the 1 key. (NOTE: If you want to lower the value, or if you pass the value you wanted, release the 1 key, press and release the 7 key and then press and hold the 1 key. The value will then decrement by 1). 6. Press F3 to save your changes and reset the table.   Read More

1. Press NumberPad 1 to Start the Game. 2. Launch the ball with the down arrow key. 3. Aim for the Targets and Enjoy.   Read More

1. Press NumberPad 1 to Start the Game. 2. Launch the ball with the down arrow key. 3. Aim for the Targets and Enjoy. Note Aim for the Rota Target and activate 4 lights to open the Skittle Table Gate, which is positioned behind the Rota Target. Follow the Loop lane to get there.   Read More

Here you have Genie, a widebody by Gottlieb from 1979. The playfield is packed, the art package is gorgeous, the gameplay is challenging. Genie is a collaboration with rothbauerw, who put his skills into the script, DOF, physics, VR, FSS, etc. (all the cool stuff). There are some options at the top of the script: You can switch between liberal and conservative operator post positions (default conservative). Liberal settings requires a playfield image swap which is included in the vpx image manager. An option to use DOF chimes (default is off). An option for VR view (default is off). Thanks also to Arconovum for FSS script Borgdog for lane guide tent and spinner meshes 32assassin for the base script Jon Osborne for plastic and bumper scans This game requires 10.6 or higher and is VR and FSS ready.   Read More

This is the EM version of Freedom. There are some minor differences in gameplay (one being the center star target scores 40 points and moves the pointer 4 steps)   Read More

An almost from scratch build of my first ever upload! Big thanks to Herweh for his incredible stuff, and another special thanks to 32assassin for bringing this table to VPX!!   Credits: - Herweh for the incredible saucer physics, scripting all moving parts, SSF sounds and reworking the rest of the script! Thanks, man! - 32assassin for bringing this table to VPX! I used his table as a base for all of this. - Mlager8 for his incredible Apron redraw! - Poppote for his ultraclean original artwork. Made the 8k upscale alot easier! - Bord for the shooterlane image and playtesting! - BorgDog for the wood image! - Thalamus for playtesting and kicking everybodys ass in the forums!   Read More

This is a VPX recreation of a 1964 Midway Flying Turns pinball machine. Several options you can turn on in the script.Line 8 - netplayenabled = true. This enables peer to peer network play via vpPlus (explained later in this discrption).False = offLine 14 - handsenabled = true. This enables virtual hands to use the controls. False = offLine 20 - musictalkenabled = true. This enables my choice of music from the 1964 era to be played. In game you can turn on/off with the "f" key. Also enables me getting angry when the ball play is short. False = off always. There is a B2S backglass included and a wheel art logo in the table zip file. Cab people, you know what to do with B2S and Wheel art. VPPLUS!!!Peer to peer 2 player games over the internet!!!If you want to give this a try, get the vpPlus plugin installer here.https://www.vpforums.org/index.php?app=downloads&showfile=3057 Let me just say this, vpPlus can be pretty touchy to install and use and what I type in this discription is all the support you will get from me. This is not to say that it is not awesome or the most fun way to play this table, because its a freaking blast when you get it working. So lets start with the installing. INSTALLING VPPLUS: To install, extract the vpPlus zip file some where. Now RIGHT CLICK Setup.exe and run as ADMINISTRATOR. After that just follow the install. Its important that the program gets installed as ADMINISTRATOR to register the com object with Windows. The other thing that is very important is that VPX is also run as ADMINISTRATOR. The ideal way to play this vpPlus table is to establish a voice over ip chat through like Discord or TeamSpeak or someother voice activated voice chat. So you can talk to the person you are playing against. I use Discord. Make this audio connection first before running the table. If you are hosting the table, share with the other person your IP address to connect to (your external IP address. If you don't know what it is you can get it by going to this site. https://whatismyipaddress.com/ VERY IMPORTANT!!! THE ONLY WAY TO LAUNCH THE TABLE IS TO DOUBLE CLICK THE .VPX TABLE FILE. YOU CAN NOT OPEN VPX EDITOR FIRST OR LAUNCH THE TABLE THROUGH PINBALLX. I'm not sure why, but if you load the table any other way you will get Socket# 0 errors and the table won't launch. Once the table is launched by double clicking the table file it will open and run the table. Two coins will be automatically dropped and two start buttons will automatically be pressed too. Also after you play a full game, and both of you decide to play another game, the 5 key will drop two coins and press the start button twice automatically to start the next match.  Anyway, once you start the table successfully the connection dialog box will appear shortly after the coins and the start buttons are pressed. THE HOST: This is the person that is willing to share his IP address and open two ports through his firewall and/or router. By default vpPlus uses ports 12345 and 12346 for its communication. You can set different ports if you choose on the dialog box when you host, but they need to be open through your firewall and/or router. THE CONNECTING MACHINE: When the hosting person says he is hosting, then the joining person picks the option to join and types the hosting persons IP address and click OK.Leave the Disable UPnP checkbox checked. Now if you did everything right and don't get a Socket# 0 error, then you will get a dialog box to enter your name. After both of you have entered your names and click OK, the game will start. The hosting person is player 1 and starts the game. After his ball drains, the visiting player gets control and can play their ball. ONE OTHER IMPORTANT THING!!! ONCE YOU GET CONNECTED AND ARE PLAYING, DON'T PAUSE THE GAME OR CLICK ON ANOTHER WINDOW. In other words don't lose focus on VPX or the connection will crash. You probably will have a crash when one of you decide to leave. Again I need to stress that vpPlus is AS IS and I will not support it, so don't PM me. If you can't figure it out from this point then just disable it at line 8 in the script and play flying turns like any other table. You can even launch it with pinballx if you don't use vpPlus. But if you can get a good stable connection with someone and you can talk to them via Discord, its a real blast. These directions will be included in the zip file too. I hope some of you try out the P2P netplay, its a lot of fun.-Rascal   Read More

This is an update to francisco666's and 32Assassin's excellent VPX port of Twister.   Thanks go to him for his table, and the permission to mod it. I've made many functional fixes, physics tweaks, and visual updates.    I've used the NFozzy/Rothbauerw physics tutorial to set the physics, I think it plays much better now.   There should be less stuck balls, and the all important twister multiball sequence is fixed. I also ran the transparent ramp through some of Flupper's ramp tutorial process to texture it.    I'm no expert in blender but I think it's an improvement.    I also used some filters on the DOROTHY primitive so it looks more round. Enjoy!   Read More

Stern's Stingray is a classic of the late EM/early SS era. It features solid state scoring and a set of four chimes. Hit the saucers for a rotating award and build your bonus. Complete the drops to light specials, which are worth a significant 100,000. Download includes B2S, nvram for best home settings, and an underpublished ROM for tournament settings. More about the tournament settings here. Thanks to all the beta testers for helping me iron out the bugs. Thanks to cryptdoctor21 for his playfield work, of which I used the skeleton. Thanks to 32assassin for lamp assignment 52, which stumped me longer than it should have. Thanks to nFozzy/rothbauerw for your incredible work with vp physics.   Read More

Hardbody (Bally 1987) Please read before installation: Rom not included, Place included hardbody.nv file in your vpinmame/nvram folder Thanks to Matt, Mlager8, for teaming up once again to bring you Hardbody.  Original playfield from Tab on VPF, Matt took both and worked his magic to make them look even better, We did a lot of work to get this table not only playing smoothly but looking great.  Matt did all the chrome walls and ramps in Maya and they look amazing.  Lots of play testing and sound work by Thalamus, thanks again. To get the ramps to go up you have to complete all 4 sections and hit the inner loop when the white arrow is lit. This table had flex flippers that are assigned to magnasave buttons.  They will automatically trigger if the rollovers are hit also.  Once they are hit, they take a few seconds to reset for use again. Thanks to all contributors: 32assassin: Converting to VPX and initial scripting Thalamus:  All the sounds, SSF, extensive play testing Randr:  Scripting the ramps Cyberpez:  scripting the back target wall reflections Mlager8:  Primitive ramps, Apron, playfield, plastic artwork, rendered walls, translite, etc Wildman:  for updating b2s over at VPU     Read More

Knorrs (+ team) beautiful Cirqus Voltaire in VR. I used drhotwings1 clean VR room that is based on 3rdaxis TAF VR room. Cabinet decals are from a nice member here. Thanks guys! This table is pretty demanding. I face some stutter during multiple multiball. Maybe there will be a less demanding version soon. If you see any room for improvement, just let me know. If the table is unplayable for you, turn off the win 10 live protection and try the tool PinAffinity.   Read More

This is a mod of Bigus's mod, so a mod of a mod :) And only graphics. First i want to thank you to all authors, Jpsalas, Bigus , team PP. I Always wanted a better looking Guns And Roses for VPX. So i started to remake the playfield and changing plastics, snake etc. I want to start with the most important thing: This is not the last version, if i will find good pictures for the bad quality plastics i will do an update.  You will see 3 or 4 plastics still lower quality, but at least te Playfield and some plastics and the snake looks better. Hope you will enjoy as a start :)   Read More

This ended up being a complete rebuild of Rascal's conversion. Special thanks to BorgDog for being the main mentor and SME on this build.  Couldn't have done it without you!  It all started with a fresh playfield image to work off of.  All credit and thanks to OCD_pinball from pinside for the playfield pictures which made this build all the easier to get as accurate as possible.  Thanks to Bord for his work on the graphics and  expert advice.  All the primitives were replaced and countless hours of detail and testing to make it play as accurate as possible. Thanks to Wildman for all of his amazing backglasses he creates and for the artwork and resources he made from his original table creation!  The plastic scans from his actual table were cleaned and added by Bord which makes the table pop! Lastly thanks to Thalamus and Arngrim for adding the final touches to the SSF and DOF which adds all the realistic effects that cant be beat! Thanks for the group effort and Enjoy!   Read More

Wheel (Maresa 1974) https://www.ipdb.org/machine.cgi?id=4644 Conversion of Akiles50000's VP9x version Additional assistance from JPSalas with some physics settings    Read More

This is a Skitso remaster of Tom Tower’s and Ninuzzu’s Medieval Madness Reloaded. TEAM ROTHBORSKI: Project lead, visuals and QA – Skitso Scripting, gameplay and physics – rothbauerw Mesh playfield and primitives – bord Features: Completely revamped gameplay and physics with all the modern VP tricks New mesh playfield with all the nice holes and edges New animations and sound Improved GI lighting Completely new inserts lighting Completely new flasher lighting Completely new wall reflections and other atmosphere elements Completely new HD apron texture Improved playfield texture Countless amount of bigger and smaller details and polish As requested by the original authors, the download is not from VPinball, but from VPUniverse.   Read More

Egg Head (Gottlieb 1961) https://www.ipdb.org/machine.cgi?id=758 artwork by GNance As this is a manual ball lift game, you can use "1" or "a" to do the ball lift. Or if you prefer, go into the configuration menu and set it for auto ball lift   Read More

Satin Doll (Williams 1975) https://www.ipdb.org/machine.cgi?id=2057 Playfield and plastics images by Chinzman93 Backglass by Wildman Apron by Griz playtesting and suggestions by Tom    Read More

Thanks to Dozer to permit everyone to mod this table. Dozer : VPX version V2 : Big big thanks to Thalamus who help me to resolve and improve a lot of things : - some Samples added - SSF added - Old Scipt removed (Ball collision) Dof again by Arngrim !!! Big thanks to rothbauerw for ball bouncing script !! 3d all done again by JPJ 3d Rocks : Aetios All 3D texturing JPJ Playfield done first by Petri Renbro and completed by NeoFR45 BackWall and torpedo's cat done by Petri Renbro Apron draw again by JPJ 2D Plastics done by JPJ (Big Thx to Chucky who help me to find better images) Lights JPJ Some Scripts added by JPJ Big thanks to JPSalas for his rainbow script and for all that he do for Pinball community !! Thanks to all of the authors who create some news methods of scripting with all of the novelties of VPX !!! Big thanks to Pincab Passion !!! Always behind me !!!! Chucky, Aetios, Neo, Arngrim, Shadow, Peskopat, Sebcemoi and all of them !! Big thanks to Vpinball.com to share and support our tables too !!!!! Big thanks for beta testing : Chucky, Aetios, Perkopat, Shadow, Thalamus, Mussinger, ... And so a big big thanks to VPX's authors !!!   V1: JPJ ! lights have been changed, and a lot of them added. Reflection mod added. Some elements displaced for a better gameplay. 3d Bumpers changed for mines ;) plastic glasses added as in the real pinball. Switches width adapted to different lanes, so they work everytime now. i've scripted the lights behind the drop targets, when you hit a boat and slighshots Changed target texture, i've done transparent's. Enhanced target sound and rubber collision. 2 missing  Swiitches added and submarines nudge and animation. Physics adapted from a clark Kent's table. Thanks to Aetios for new 3d elements ;) ;) Rocks, yellow lights, submarines Thanks to Petri for beautiful 2d draws (Bumpers draw, backwall). Waiting for the end... Thanks to Arngrim for DOF ;) ;) ;) ;) Thanks to the PincabPassion's team for their support !!!! Thanks to Chucky for its Backglass adapted to this table !!!!! ;) ;) ;) Thanks for the advices of Beta testers : Bertie, Peskopat, Arngrim Thanks for all who have worked on this table before.   Read More

It all started with a mod of @jbg4208 Kiss table to make the Miss World mod.  It ended up being a full rebuild and ever since I wanted to convert it back to Kiss.  Nfozzy's physics, a full plastic set, new apron, all the primitives.   Thanks to wtiger over at VPF for the playfield image.  Thanks to @Thalamus for SSF work on this and Miss World and for play testing and QA.  Thanks to @Mlager8 for beautifying the plastics and apron decals and for the apron that will also be featured soon on...Hardbody! Please enjoy!   Read More

Warning*** Contains Nudity*** This was a conversion available from Geiger for the Kiss table.  The conversion only included a new Playfield and new plastics added to the Kiss table.  Special thanks to TAB for his PF which made this table possible.  Thanks to @jbg4208 for his Kiss table which was used as a base to begin this project.  The complete PF was repopulated with new primitives and new apron, spinner images, bumper caps and drop target images.  Since these were all not changed from Kiss, I made images that I thought would go with the theme.  If you want a correct table you can use the Kiss images, but it looks kinda silly. I had a lot of issues with the lighting and getting this table to look right due to the colorful PF.  Thanks to @32Assassin for jumping in and helping out with the pieces on the table that were missing and for going through the scrip to update it.  Also thanks to @Thalamus for giving this table and all my tables his final touches too.  Appreciate your support! I am still not 100% happy with the lighting and/or the physics.  I am going out for a bit and wanted to get this out there for many to test.  If you have any suggestions on the physics or lighting please feel free to speak up.  I would also like to go back and do the shadows with Blender so there will be an update to this in the near future. Thanks to @Wildman for his new B2s! http://vpuniverse.com/forums/files/file/2994-miss-world-geiger-1982/ If anyone wants to do a wheel image for it please do. much appreciated. Enjoy!   Read More

Top Gun This one’s for the Top Gun fans. One liners, 80’s music and big hair! Parents: Rated PG for mild language ————————————————————— v1.0b Beta test ————————————————————— The table is a MOD based on JP’s Taito Space Shuttle. Thanks to JP Salas for permission to do this. FS Cab table (Desktop works, however I need  to adjust some lighting to look better in Desktop) INSTALLATION: STEP 1: Ensure Pinup system is working properly prior to installation Requires the ‘sshuttle’ ROM in order to run Requires VPX 10.6+ PUP Pack: Add the [TopGun] folder to PUP videos The ‘sshuttle’ folder in PUP videos must be empty Turn your volume down a touch before running (some might consider this loud…it’s fine for me) STEP 2: Nb. Due to the ‘continue’ power failure feature of TAITO roms, there’s a known bug that can cause havoc with gameplay. Before running first time and to be safe, reset the game ROM (you should only need to do this once, unless you’re having problems) Load game press ‘Home’ key once press ‘7’ key once press ‘F3’ twice TopGun_DMD.png drag this to ‘DMD’ in pinup popper setup / Media Manager (not required for game to run, but looks good) So long as you don’t have a TAITO space shuttle PUP pack installed (none currently exist), the table should work fine. To avoid potential Space Shuttle conflicts with scores, backglass etc. I suggest you run the Williams Space Shuttle which is basically the same table, except using a different ROM (sshuttle_l7) - eg. Bord’s Space Shuttle MUSIC VOLUME: Under Player Options in the script, raise or lower the value (100 is maximum volume), compile when done and save table. soundtrackvol = 80 ————————————————————— GAMEPLAY Notes: T O P G U N bonus is achieved by lighting the words Top Gun only. Hitting the centre drop target will light the ‘Star’ which kills the possibility of getting the bonus. Another level of difficulty. Locked balls - other players can steel all your hard work and unlock your multi-ball in turn. If you don’t see a favourite quote it’s probably because you haven’t hit the acquired bonus, ramp or combo. Some of these are activated randomly, whereas ‘more special’ scenes are locked in for difficult bonuses. KNOWN BUGS: This is in beta, so there are bugs: Turning music down for PUP activations is timed to 9 seconds. If anyone knows of a way to check video lengths in realtime to update volume dimming dynamically please let me know more than 1 player may kill the music (mainly p3, p4) topgun bonus when lit for extended periods (although highly unlikely) will lower music volume for 9 seconds some erroneous PUP activation bugs with Ball lock and MultiBall ————————————————————— Table NOTES: I’ve changed the game slightly (or a lot depending on your viewpoint) from the shuttle original, mainly the right ramp addition, to speed up game play, table angle and bumper speeds to make gameplay more dynamic in keeping with the Top Gun theme. The game is intentionally quicker as it’s a 5 ball credit. Fast drains are common. I chose the original table (1984) because the style fits the time frame of the movie (within a couple of years). The lighting overkill and some of my sound effects are intentional to work with the whole Hollywood theme, also makes the playfield more dynamic in keeping with the movie. I did think of modding the F14 table originally, however that’s already a great fighter jet themed table so I didn’t want to mess with it. Thanks: the gurus who took time to answer some rudimentary scripting questions ScottyWic for the orbital pinball framework and tutorials (and chilloutthemusic) LynnInDenver for the awesome score routine, exactly what I needed. everyone who posted positive comments to keep me motivated on this. ————————————————————— *** This is a fan based Top Gun virtual pinball table concept for personal use and created as a proof of concept, based on the ‘Top Gun’ movie. All credits, images and movie clips belong to Paramount Pictures and Don Simpson/Jerry Bruckheimer Films. Music by Columbia Records used in the film Top Gun. —————————————————————   Read More

Okay here we go. Last time it was in VP9 time when i gave back something for this amazing community, now i try to thank it with a little 4k Graphical mod of Dozer's amazing Indianapolis_500_VPX_1.1_RTM. I really love Indianapolis 500 side by side with Getaway HS2 those two are the top Pinball tables for me. The most important thing is...all credit all thanks must go to Dozer! Becouse i just did the graphical job but the amazing table is 100% made by him. Dozer's version are amazing, one of the best ramps i every saw in any VP table, and the Turbo circle lock looks amazing too so i not touched either of these. Not touched the lights, so what i did: -Fixed the left and right ramp's ball stuck bug with 2 additional walls -Nothing else, just graphic job...reworked playfield, added 4 missing plastics etc. etc.. Oh wait...did i mention that all credit and thx must go to Dozer? :)     Read More

My second VPX Project Ace of Speed Mod of MOUSIN' AROUN (Bally/Midway, 1989) (Version 1.1) Great development by Herweh 2019 for Visual Pinball 10 I made a PupPack for the DMD screen, you can perfectly play the table without , but you will enjoy and have a better experience with it ! Please read installation instructions   Ace of Speed special thanks to : First of all : Thanks to Herweh to let me modify this table. He made a awesome work. Also Thanks to everybody who worked on this table with him (and before under VP9) - This is THE "thank you" ... Without him this table wouldn't look like this ... BIG THANKS to David Vicente, the illustrator/artist of most of the Artworks elements he let me modify and adapt for this project. - David Maldonado for his daily support, advises , brain storming and for the wonderfull 3D stuff he's preparing for a future release. My friend your are the number one ! ;) - JPJ for his solutions to some issues and for  the 3D Charger RT model and integration help. - A big big thank to Scott Wickberg who helped a lot with codes and the 3D pistons! Scott, you are a Magician ;) - Thx to David Paiva for his patiency an help with the PupPack - Thanks to virtuals pinball facebook groups , specialy: the frenchy one "Monte Ton Cab" , Scott's "Orbital creators club" and "Pinup Popper Artists Association" - Thanks to Rik Laubach for his beta-testing time ;) ... Sorry if I forget somebody  :)  Gonna have to thank my wife Vero also, for the tones of hours she let me pass in front of the computer!   Hoppe you all enjoy this table ! ;)   Read More

Barbarella (Talleres del Llobregat 1972) https://www.ipdb.org/machine.cgi?id=5809 Conversion of Akiles50000's VP9x version Additional assistance from JPSalas with some physics settings    Read More

Tam-Tam (Playmatic 1975) https://www.ipdb.org/machine.cgi?id=2496 Conversion of Akiles50000's VP9x version Additional assistance from JPSalas with some physics settings    Read More

Concorde (Emagar 1975) https://www.ipdb.org/machine.cgi?id=6024 Conversion of Akiles50000's VP9x version Additional assistance from JPSalas with some physics settings    Read More

Caddie (Playmatic 1970) https://www.ipdb.org/machine.cgi?id=417 Conversion of Akiles50000's VP9x version Additional assistance from JPSalas with some physics settings    Read More

Another crazy not pinball creation by Rascal. VPX Foosball 2019 is just that, a foosball game. It does auto row switching for you so you just need to control one row. You can control it with several different controllers (Keyboard, Mouse, Joystick X and Y axis, Joystick X and Y Rotation, Joystick POV, or on a cab with left flipper, left magna-save, right flipper, and right magna-save). You can play against another player with sharing a keyboard (w, a, s, z for red team and arrow keys for blue team). You can also play red team joystick and blue team mouse. Then there is the red team set to AI which is insane, but crazy fun. See if your good enough to beat the AI. All these option choices are in the script at the top. If for any reason the ball gets in a dead state, you can hit "k" on the keyboard or do a forward nudge on a cab to give the ball a little kick. Included in the download is the table, a b2s, a logo art, and the vpmousejoystick com plugin to get the mouse and joystick functions into VPX. There is a instruction to install text file included too. Hope you try it and like it. -Rascal   Read More