• Don't forget to rate 1-5 stars! Check the support tab for any help or comments.

  • (4)
    « »

    Cirqus Voltaire (Bally 1997) day & night

    The script is included as Table script change for Cirqus Voltaire (Bally 1997) night version.zip. It does also include a DMD screen and a fantasy option to lit it.

    Split into two files it does work with every DMD version from Dozers's CV DMD table or mod version and also Knorr's version only.

    Thank you very much Hauntfreaks for your backglass pictures and rothbauerw for your script help!

    The script is included as Table script change for Cirqus Voltaire (Bally 1997) day and night version.zip. It does also include a DMD screen and a fantasy option to lit it.

    Split into two files it does work with every DMD version from Dozers's CV DMD table or mod version and also Knorr's version only. For Knorr's table you seem to be able to include the script also at the end of the script. It could be that the table script requires a later update to see for example the endflash sequence like in Dozer's table.

    Two new night colour mods without an extended grill for Dozer's and Knorr's CV DMD table. I did not upload the script within this releases as you find it here in nearly all uploaded dB2S folders. Users asked for a not extended grill version. The second one is ready. (Night version for Dozers's table)

    Users asked for a no grill version. The first one is ready. (Night version for Knorr's table)

    Day versions for Dozer's and Knorr's DMD table. I did not test the Dozer version before the upload due to spare time reasons. For Knorr's table you seem to be able to include the script also at the end of the script. It could be that the table script requires a later update to see for example the endflash sequence like in Dozer's table.

    New cannon ball. Includes rotational sharpness and spin motion, new timings, light reflections from outside the backglass, new motions trails and tad active light reflections from the backglass.

    This topic contains 71 replies, has 21 voices, and was last updated by  killa7977 1 day, 20 hours ago.

    Viewing 20 posts - 1 through 20 (of 72 total)
    • Author
      Posts
    • #123109
       bassgeige 
      Participant

      Cirqus Voltaire (Bally 1997) day & night

      The script is included as Table script change for Cirqus Voltaire (Bally 1997) night version.zip. It does also include a DMD screen and a fantasy option to lit it.

      Split into two files it does work with every DMD version from Dozers's CV DMD table or mod version and also Knorr's version only.

      Thank you very much Hauntfreaks for your backglass pictures and rothbauerw for your script help!

      #125539
       randr 
      Keymaster
      ModeratorMember

      Thank you for the b2s :)

      ********************************************************
      Messing with the VPinball app and push notifications.
      So if you haven't downloaded app yet what are you waiting for!?
      *******************************************************

      #125580
       Dazz 
      Participant

      Anyone get this to work on the new table?  I did the script edit, but now the b2s isn’t displaying. B2S was working previously.

      #125586
       rothbauerw 
      Participant
      ContributorMembervip

      @dazz, Thalamus had a similar issue.  He thought it was an issue with having the grill hidden.  Either go back to the old b2s and unhide the grill or edit your B2STableSettings.xml to unhide it.

      Current Project: Perpetual updates of Pinball Magic

      #125593
       deaks 
      Participant

      Yer I get nothing with the script and enabling grill in b2s or tablesettings

      #125611
       calium 
      Participant

      i didn’t change anything in script and it is working with new table.  i thought the script change was for the old table?

      #125616
       Thalamus 
      Moderator
      ContributorMemberModerator

      If you read what Roth said. He provided a script with some added db2s calls. He hopes that the original author updates this db2s with the changes he made.

      #125630
       BrandonLaw 
      Participant

      I feel everyone’s pain here…all other b2s’s work fine.  Can’t say i’ve ever had this issue where it just does not load.  This one does not.  Is everyone’s b2sServer and accompanying files from 7/30/18?  I assume that is the current version, and the b2s just does not show.  I can mouse over my backglass and see the cursor hanging out.

      #125632
       BrandonLaw 
      Participant

      SO!~  I tried something….and I know ZERO about designing backglasses.  This thing was huge and I appreciate that coming from a guy who runs 4k, but my  backglasses are 1920×1080.  I exported the original (I think haut said something somewhere about not editing the size and I get that…)and I resized it to 1920×1920…and saved.  Loads fine now, but the wheel is off.  It’s a size thing…at least for me.

      1 user thanked author for this post.
      #125642
       chucky87 
      Participant

      hello I fixed the db2s display problem because of the display of the grid. bassgeige you can check if it suits you. if not made a return thank you

      https://mega.nz/#!q5M1nISb!sZjbBx47XX4xtrZQ6vikZm7F_IvCSot-1oZI08UtYIM

      #125657
       Thalamus 
      Moderator
      ContributorMemberModerator

      You might want to try this. Open B2STablesettings.xml and search for cv20_h – it it is there, try to replace it with this. The essential part for me is the 3 first lines. If not – try to add it. Thanks goes to @rothbauerw that pointed me in the right direction.

      
        <cv_20h>
          <HideGrill>0</HideGrill>
          <HideB2SDMD>1</HideB2SDMD>
          <HideDMD>2</HideDMD>
          <LampsSkipFrames>1</LampsSkipFrames>
          <SolenoidsSkipFrames>3</SolenoidsSkipFrames>
          <GIStringsSkipFrames>3</GIStringsSkipFrames>
          <LEDsSkipFrames>0</LEDsSkipFrames>
          <UsedLEDType>0</UsedLEDType>
          <IsGlowBulbOn>0</IsGlowBulbOn>
          <GlowIndex>-1</GlowIndex>
          <StartAsEXE>1</StartAsEXE>
          <StartBackground>0</StartBackground>
          <FormToFront>1</FormToFront>
          <Animations />
          <DualMode>1</DualMode>
        </cv_20h>
      
      1 user thanked author for this post.
      #125682
       bassgeige 
      Participant

      @dazz, Thalamus had a similar issue.  He thought it was an issue with having the grill hidden.  Either go back to the old b2s and unhide the grill or edit your B2STableSettings.xml to unhide it.

      The two versions should be similar. The only difference is that you need for each dB2S the valid table and for each of them their own valid script. Yesterday it was only possible to load a version up which was not like the Dozer dB2S version pretested beforehand.

      #125683
       bassgeige 
      Participant

      @dazz, Thalamus had a similar issue.  He thought it was an issue with having the grill hidden.  Either go back to the old b2s and unhide the grill or edit your B2STableSettings.xml to unhide it.

      To have the newsignals from the table preserved each table does need their own script and their own dB2S. The dB2S for Knorr’s table does need a modified script to enable the sound for the cannon and the bell. Also it seems that maybe the cannon shot sound does need to be included in Knorr’s table too. We will sort that out step by step.

      #125684
       bassgeige 
      Participant

      If you read what Roth said. He provided a script with some added db2s calls. He hopes that the original author updates this db2s with the changes he made.

      Thank you, as the previously Dozer dB2S was similar I had the impression everything does work as it should. You have a few options to control the dB2S. I made a few quick pictures for the basic features. (Grill hidden, DMD visible in a case of need, and the third screen usage which does also have the option to be lit with the fantasy mode. I am not able to test the third screen mode myself but it should normally work like that.)

      Attachments:
      #125686
       bassgeige 
      Participant

      You might want to try this. Open B2STablesettings.xml and search for cv20_h – it it is there, try to replace it with this. The essential part for me is the 3 first lines. If not – try to add it. Thanks goes to @rothbauerw that pointed me in the right direction.

      
        <cv_20h>
          <HideGrill>0</HideGrill>
          <HideB2SDMD>1</HideB2SDMD>
          <HideDMD>2</HideDMD>
          <LampsSkipFrames>1</LampsSkipFrames>
          <SolenoidsSkipFrames>3</SolenoidsSkipFrames>
          <GIStringsSkipFrames>3</GIStringsSkipFrames>
          <LEDsSkipFrames>0</LEDsSkipFrames>
          <UsedLEDType>0</UsedLEDType>
          <IsGlowBulbOn>0</IsGlowBulbOn>
          <GlowIndex>-1</GlowIndex>
          <StartAsEXE>1</StartAsEXE>
          <StartBackground>0</StartBackground>
          <FormToFront>1</FormToFront>
          <Animations />
          <DualMode>1</DualMode>
        </cv_20h>
      

      The input from the table is preserved in the latest dB2S. If there are anomalies in the presentation it does need to be investigated. I like to hear everyone’s feedback. Thanks.

      #125688
       bassgeige 
      Participant

      hello I fixed the db2s display problem because of the display of the grid. bassgeige you can check if it suits you. if not made a return thank you

      https://mega.nz/#!q5M1nISb!sZjbBx47XX4xtrZQ6vikZm7F_IvCSot-1oZI08UtYIM

      New tables may run different as previous ones. If there is a possibilty to solve PC demands that step is also doable but does may need more time as everything is brand new right now.

      #125709
       bassgeige 
      Participant

      Knorr’s 1.1 table version does solve the missing bell sound.

      #125713
       bassgeige 
      Participant

      Knorr 1.1 and video dB2S demos:

      https://youtu.be/zDkrtFZjvts

      https://youtu.be/AM0dLUodvVk

      If you do not use the animated third screen you should disable the fantasy mode.

      1 user thanked author for this post.
      #125756
       Schreibi34 
      Participant
      Member

      Looking great!

      #125763
       BrandonLaw 
      Participant

      Lil’ nugget…if the Ringmaster is holding your ball and you shake the dongs out of the cab, the ball will drop in the lock ramp.  YAHTZEE!  Free lock.  I need all the help I can get as I’ll be the first to say I suck.  Not sure if that happens in the real game, but what a time to be alive.

    Viewing 20 posts - 1 through 20 (of 72 total)

    You must be logged in to reply to this topic.

  • Please login to download.

  • ©2019 VPinBall.com

    WP2FB Auto Publish Powered By : XYZScripts.com
    Vpinball.com

    Log in with your credentials

    or    

    Forgot your details?

    Create Account