• Don't forget to rate 1-5 stars! Check the support tab for any help or comments.

  • Don't forget to "THANK" or "LIKE" the Author's 1st post in support topic.

  • Download Info

    Thumb
  • New Update includes  SSF (Surround Sound Feedback)

    VERY IMPORTANT#####

    Inside the Pup-Pack you have 2 zip files, you have to choose just the one you going to use and unzip it. Have to do with the way you are launching FX3 from PinUP Popper, if you not sure check your script. Read the Pdf file for easy understanding.

    IF pupdmd use (PupCapture) if dmdext use (pupcapturedmdext) and Rename it PupCapture.

    THEY CAN NOT BE BOTH UNZIP.

     

     

    Sorry for all people that download the Pack and was not working was missing the most important file . I upload the file and its ready to download.

    New DOOM Pup-Pack for FX3, this is probably my FX3 favorite game so I really put a lot of hours learning how to do Pup-Packs and edit videos.

    Special Tanks to Nailbuster that make all this much easier with the pupcaptures features and PinUP.

    TerryRed for the videos explaining how everything works.

    John Memeo for the support, test and ideas.

    This guys are amazing the support they give to the community. Thanks

    This Pack Includes Topper and backglass, most of the videos don't have sound because the sound of the game it self its pretty good and I didn't want to change that experience.

    Easter Egg Somewhere there (Thanks John)

    Most of the Videos are from the Doom Eternal game adapted to actions of this game.

    Video Preview

    https://youtu.be/ugmibcGqH_w

    All video, Media, artwork and pupcapture files by PedroPeres

    Requirements:

     

    PinUP System 1.3.4 or greater installed and PinUP Player setup.

    https://vpinball.com/VPBdownloads/pinup-system-player-and-popper-front-end-install/

    http://www.nailbuster.com/wikipinup/doku.php?id=release_notes

    DMD Colors:  Default (Single Player)

    It's important that you set your DMD colors to match the default in order to ensure proper PuPCapture operation.

    VERY IMPORTANT#####

    Inside the Pup-Pack you have 2 zip files, you have to choose just the one you going to use and unzip it. Have to do with the way you are launching FX3 from PinUP Popper, if you not sure check your script. Read the Pdf file for easy understanding.

    IF pupdmd use (PupCapture) if dmdext use (pupcapturedmdext) and Rename it PupCapture.

    THEY CAN NOT BE BOTH UNZIP.

    Ensure there are no files in your "PUPVideos - Bethesda_Doom" folder (if that folder already exists).

    Copy the PuP-Pack (Bethesda_Doom) folder into your PUPVideos folder.

    Launch the game and Enjoy.

    Missing Pup Folder Added

    Currently, there are 0 users and 0 guests visiting this topic.
    Viewing 20 posts - 21 through 40 (of 67 total)
    • Author
      Posts
    • #206628
      elvinu
      Participant
      @elvinu
      Member

      @elvinu

      I’m not using dmdext because I had problems closing and opening fx3 tables so I changed to pupdmd that is working great, but if you have problems please let me know that together we find a way to make this work for you.

      here is the script that I use ( Except he part with Altmode because I don’t use that) I just use the first 3 lines and the last one.

      https://www.nailbuster.com/wikipinup/doku.php?id=pupdmd_fx3

      Thanks @outhere a lot for your help, I’m a newbie myself so a lot of things I’m still not familiar with.

      I just saw this reply from you.  I’ll try this next.

      #206632
      pedroperes02
      Participant
      @pedroperes02

      @elvinu Remember if you gonna use pupdmd you need to use the other zip file pupcapture and delete the other one.

      please keep me posted

      #206635
      elvinu
      Participant
      @elvinu
      Member

      I just tried PupDMD and I saw a little difference.  For starters . . .

      I changed my scripts to the following:

      NEW NEW DOOM

      I then went into FX3 and adjusted the DotMatrixSize to Off:

      NEW NEW DOOM2

      And the DMD size to 520×136:

      NEW NEW DOOM3

      I then launched Popper and tested the Aliens FX3 table and it worked OK.  I then tried Doom a couple times (after a Popper relaunch and after exiting Aliens).  Unfortunately, I still just see that one video.

      Then I grabbed the DMD in the upper left and moved it to the center of the screen.  There’s another DMD underneath.  Which is the one the game uses to change the videos?

      I tried resizing the large one with the tab in the lower right to match the one underneath and place it exactly on top but no change.

      But then as I was just dragging that upper DMD around the screen, I suddenly saw a different image in the upper right.  I saw a few static images of different aliens.

      I’m close but I don’t understand the two DMDs right now.  Should I set one of them off the screen?

       

       

      #206638
      pedroperes02
      Participant
      @pedroperes02

      are you using the other pupcapture file now?

      #206642
      pedroperes02
      Participant
      @pedroperes02

      and did you deleted the older one?

      #206659
      outhere
      Moderator
      @outhere
      MemberContributorvipModerator

      @elvinu
      This is not part of your problem but this is supposed to be at the bottom of the launch script

      timeout 15

      START /min "" "[STARTDIR]Launch\SendFXNewGame.exe"
      Thanks, I added it to the bottom of my launch script. It’s similar to what’s in the Close Script. What does it do?

      https://www.nailbuster.com/wikipinup/doku.php?id=emulator_fx_non_steam#annoying_would_you_like_to_continue_or_start_new_game_fx3_prompt

      #206660
      elvinu
      Participant
      @elvinu
      Member

      That did it.  Solved!!!

      Once I ditched the other PupCapture and used the correct one, I’m now getting the videos.

      I tried to edit my original post to put “SOLVED” at the top, but it’s not letting me update that post.  I’m getting the following error message “A potentially unsafe operation has been detected in your request to this site”.  I’ll keep trying.

      Thanks so much for getting me through this and of course your hard work on the puppack.  I’m guessing because of this, there are a lot of us who are now jumping into FX3 puppacks.

      And thank you Outthere for the info on the launch script.

      BTW, I normally use a PinUpPlayer.ini file along with a pupinit.bat file for puppacks (VPX and Future Pinball).  I ditched it for these two FX3 tables.  Do you use that ini file for FX3?

      Thanks Again!!!

      #206661
      pedroperes02
      Participant
      @pedroperes02

      I’m Very Happy that you make it work, I normally don’t touch that files but maybe someone with more experience can let you know the best way, And Enjoy the pup Pack and let me know what you think, also try the tilt to see what happens lol

      #206663
      outhere
      Moderator
      @outhere
      MemberContributorvipModerator

      That did it. Solved!!!
      Once I ditched the other PupCapture and used the correct one, I’m now getting the videos.
      I tried to edit my original post to put “SOLVED” at the top, but it’s not letting me update that post. I’m getting the following error message “A potentially unsafe operation has been detected in your request to this site”. I’ll keep trying.
      Thanks so much for getting me through this and of course your hard work on the puppack. I’m guessing because of this, there are a lot of us who are now jumping into FX3 puppacks.
      And thank you Outthere for the info on the launch script.
      BTW, I normally use a PinUpPlayer.ini file along with a pupinit.bat file for puppacks (VPX and Future Pinball). I ditched it for these two FX3 tables. Do you use that ini file for FX3?
      Thanks Again!!!

      normally – No
      Case you haven’t already remove it from your close script
      Good to see you have it working

      #206665
      elvinu
      Participant
      @elvinu
      Member

      OutThere: not sure what you mean about removing ‘it’ from the close script.  Do you mean the PinUpPlayer.ini file I was referring to?

      My current close file looks like this:

      “[STARTDIR]LAUNCH\PUPCLOSER.EXE” WINTIT “Pinball FX3” 4 1

      rem Remove “rem” on the next line to close DMDExt after exiting a table.
      rem taskkill /f /im “dmdext.exe”

      timeout 10
      START /min “” “[STARTDIR]Launch\SendFXNewGame.exe”

      pedroperes02: In terms of the Tilt videos . . . I normally resize all the videos due to harddrive space and since I’m a single screen user, I don’t need large videos.  I did notice that your table probably has more tilt videos than any other I’ve seen.  I watched a couple after converting them.  Hilarious!

      #206695
      outhere
      Moderator
      @outhere
      MemberContributorvipModerator

      OutThere: not sure what you mean about removing ‘it’ from the close script. Do you mean the PinUpPlayer.ini file I was referring to?
      My current close file looks like this:

      “[STARTDIR]LAUNCH\PUPCLOSER.EXE” WINTIT “Pinball FX3” 4 1
      rem Remove “rem” on the next line to close DMDExt after exiting a table.
      rem taskkill /f /im “dmdext.exe”

      timeout 10
      START /min “” “[STARTDIR]Launch\SendFXNewGame.exe”

      Remove this form the close script
      timeout 10
      START /min "" "[STARTDIR]Launch\SendFXNewGame.exe"

      #206756
      elvinu
      Participant
      @elvinu
      Member

      OutThere: not sure what you mean about removing ‘it’ from the close script. Do you mean the PinUpPlayer.ini file I was referring to?

      My current close file looks like this:

      “[STARTDIR]LAUNCH\PUPCLOSER.EXE” WINTIT “Pinball FX3” 4 1

      rem Remove “rem” on the next line to close DMDExt after exiting a table.

      rem taskkill /f /im “dmdext.exe”

      timeout 10

      START /min “” “[STARTDIR]Launch\SendFXNewGame.exe”

      Remove this form the close script

      timeout 10

      START /min "" "[STARTDIR]Launch\SendFXNewGame.exe"

      Done.  I should’ve realized this when I added the similar lines to the launch script.  Thanks!

      #206977
      Manolo / ICE
      Participant
      @kamerik
      Member

      I looked at Aliens (Wich i thought it worked) But it only plays the  video. It doesnt trigger anything. But at least the video played. Doom pack doesnt work, so i guess i have to change my script from pupdmd to dmdext. Maybe thats the solution. i let you know.

      *Edit. Inserted the dmdext script. First used the right coordinates, but that gave me crappy graphics so i changed the coordinate numbers into x y w -0 .

      I unzipped the pupcapture dmdext and changed the name into PupCapture. And put the file into pupvideo’s

      It still doesn’t work. Even with alt-tab it doesn’t show anything..

       

      #206981
      pedroperes02
      Participant
      @pedroperes02

      @kamerik

      Don’t change to dmdext, it have to work with pupdmd it was developed with pupdmd, let me check you script and did you follow Nailbuster instructions fx3 pupdmd ?

      #206998
      outhere
      Moderator
      @outhere
      MemberContributorvipModerator

      I looked at Aliens (Wich i thought it worked) But it only plays the video. It doesnt trigger anything. But at least the video played. Doom pack doesnt work, so i guess i have to change my script from pupdmd to dmdext. Maybe thats the solution. i let you know.

      PUPDMD should work for DOOM – Are you using the right PuPCapture Folder
      And see this for Aliens  – https://vpinball.com/forums/topic/aliens-fx3-pup-pack-bg-topper-ssf-movie-music/page/5/#post-206878

      #207003
      Manolo / ICE
      Participant
      @kamerik
      Member

      Damn hahaha i already changed it. well oke i change it back to pupdmd. i had the right pupc

      apture

      #207007
      pedroperes02
      Participant
      @pedroperes02

      @kamerik

      Please just follow that and it will work without problems Doom and Aliens, but if you encounter any problem let me know

      https://www.nailbuster.com/wikipinup/doku.php?id=pupdmd_fx3

      #207137
      BarryFuegner2
      Participant
      @barryfuegner2

      @pedroperes02

      Hi – Thanks at first!!

      I can`t run the pup pack – I love it (you tube) – and I must have it !!!

      I’ve read this history in full and tried quite a lot. I read the .pdf, unpacked and renamed the dmdext .zip. I start all fx3 tables with popper over steam. Slightly changed my launch script so that DOF starts and ends automatically. Everything has been going well for a long time. But I’ve never had a pup pack on FX3.
      The pack just won’t start at all. I deactivated my “keep display on” function especially for DOOM. – Nothing !! The table starts as usual, but then without a backglass.

      Does anyone have any advice – please
      it is very important to me.
      And I would be very grateful for any help

      #207139
      pedroperes02
      Participant
      @pedroperes02

      @barryfuegner2

      Can you send a screenshot of your start script

      #207140
      BarryFuegner2
      Participant
      @barryfuegner2

      yes – in nearly one hour – than I am at home.

      Thanx for answering so fast.

    Viewing 20 posts - 21 through 40 (of 67 total)
    • You must be logged in to reply to this topic.
  • Please login to download.

  • ©2021 VPinBall.com

    Log in with your credentials

    or    

    Forgot your details?

    Create Account

    The Vpinball app

    FREE
    VIEW