• Don't forget to rate 1-5 stars! Check the support tab for any help or comments.

  • Don't forget to "THANK" or "LIKE" the Author's 1st post in support topic.

  • (1)
    « »
  • Download Info

    Thumb
  • Classic Gottlieb roto target mesh for table authors. This is a properly scaled round-target version with marbled plastic. This was used as early as the mid-1950s. Later versions had square targets.

    For VP the unit sits at -142 z and spins on objroty. Looks bad if you have screenspace cranked up too high so keep it between .25 and .33.

    "The roto unit has fifteen targets radially mounted on a rotating disc, with up to three targets projecting above the playfield. When the solenoid is energized, the drive lever arm engages the drive pawl with the drive gear of the ratchet which spins the target disc."

    source scan courtesy of adolpho

    1.0

    Currently, there are 0 users and 0 guests visiting this topic.
    Viewing 7 posts - 1 through 7 (of 7 total)
    • Author
      Posts
    • #199402
      bord
      Moderator
      @bord
      MembervipContributorModerator

      Classic Gottlieb roto target mesh for table authors. This is a properly scaled round-target version with marbled plastic. This was used as early as the mid-1950s. Later versions had square targets.

      For VP the unit sits at -142 z and spins on objroty. Looks bad if you have screenspace cranked up too high so keep it between .25 and .33.

      "The roto unit has fifteen targets radially mounted on a rotating disc, with up to three targets projecting above the playfield. When the solenoid is energized, the drive lever arm engages the drive pawl with the drive gear of the ratchet which spins the target disc."

      source scan courtesy of adolpho

      2 users thanked author for this post.
      #199404
      bord
      Moderator
      @bord
      MembervipContributorModerator

      In use:

      roto2

      #199422
      Adolfo
      Participant
      @scorpion
      Member

      hello,

      this type of roto target changing the subject can be used with all gottlieb tables of  1950-60 years, like SILVER, ROCKET SHIP   CRISS CROSS   STRAIGHT FLUSH ROYAL FLUSH ecc.

      Thanks again to Bord

      Adolfo :good:

       

      #199424
      bord
      Moderator
      @bord
      MembervipContributorModerator

      Thanks again to you, @scorpion for the scan of the roto unit and the great info. Hope to see this used somewhere someday… @loserman76!!!

      1 user thanked author for this post.
      #199429
      Loserman76
      Participant
      @loserman76
      vipMemberContributor

      Nice. I don’t think anything I’ve done so far uses this type of roto, but I’ll definitely use it.

      #199438
      Adolfo
      Participant
      @scorpion
      Member

      we have some of this tables in vp9 version….

       

      #200889
      Adolfo
      Participant
      @scorpion
      Member

      Hello,

      I found all I need in pinside, asking to the owners of real tables, so if someone wants to do old tables can ask to these people. Surely someone can help us…

      I think this is a good idea

      thanks for the attention

      Scorpion

       

    Viewing 7 posts - 1 through 7 (of 7 total)
    • You must be logged in to reply to this topic.
  • Please login to download.

  • ©2020 VPinBall.com

    Log in with your credentials

    or    

    Forgot your details?

    Create Account

    The Vpinball app

    FREE
    VIEW