• Don't forget to rate 1-5 stars! Check the support tab for any help or comments.

  • (6)
    « »

    This is a VPX recreation of a 1995 Gottlieb/Premier Mario Andretti pinball machine. Big thanks to Destruk, Darth Soudiuos, and Joe for their earlier VP8 version.  Thanks to Pinball Ken for his ball collision script and sounds, and JP for his ball rolling script and sounds .  I co-authored this table with Steely. He did some masterful work on the spinner in this table along with other nice improvements. This table is a blast to play. It needs the rom "andretti.zip" to run, you will have to find that yourself.

    1. Place the table (.vpx) file in your tables folder.

    2. Place the rom file in your roms folder.

    3. Pray that you have VP and all its dependent programs properly setup and that it runs. lol!

    1.1 - Fixes rotating the DMD for B2S cabs.

    1.2 - Fixed flipper sounds so that they will not go when flippers are disabled. Fixed issue where the ball could go flying off the car spinner on a hard collision. Removed the Flasher DMD from the full screen table that nobody liked or could figure out how to move or remove. :(

    Version 1.3 - Includes lots of tweaks and fixes to the car spinner and other things done by Steely. Added more table sounds which includes louder rolling sounds.

    Version 1.4 - Hopefully finally fixed the display rotation between desktop, fullscreen without B2S, and fullscreen with B2S. Enabled the 6 numeric digit display on the playfield that for reason unknown were disabled with B2SOn. Also fixed trigger on left ramp that was set to the wrong surface.

    This topic contains 25 replies, has 17 voices, and was last updated by  Pinbolt 2 months, 3 weeks ago.

    Viewing 20 posts - 1 through 20 (of 26 total)
    • Author
      Posts
    • #114931
       rascal 
      Participant
      MemberContributor

      This is a VPX recreation of a 1995 Gottlieb/Premier Mario Andretti pinball machine. Big thanks to Destruk, Darth Soudiuos, and Joe for their earlier VP8 version.  Thanks to Pinball Ken for his ball collision script and sounds, and JP for his ball rolling script and sounds .  I co-authored this table with Steely. He did some masterful work on the spinner in this table along with other nice improvements. This table is a blast to play. It needs the rom "andretti.zip" to run, you will have to find that yourself.

      Total of 23 users thanked author for this post. Here are last 20 listed.
      #114933
       bjschneider93 
      Participant
      Member

      Can’t wait to try it. Thanks

      #114934
       randr 
      Keymaster
      ModeratorMember

      Thanks rascal again :)

      ********************************************************
      Messing with the VPinball app and push notifications.
      So if you haven't downloaded app yet what are you waiting for!?
      *******************************************************

      #114937
       rgarriott 
      Participant
      Member

      As a Indiana native and a regular at the track at the end of May.  Thanks for a great table with an iconic figure.

      #114949
       Bob Albright 
      Participant
      Member

      Fun Table . Thank you. Can you tell me how to make the dmd on the top of my cabinet playfield go away? It currently cannot be highlighted (show border) to make it smaller or drag it

      #114950
       Onevox (PeteM) 
      Participant

      So glad to see this. Really enjoy the real thing. Looking forward to giving it a spin. Thanks.

       

      #114954
       Goldchicco 
      Participant

      Any chance to have a DMD for the cabinet mode?

      Thank you

      #114955
       rascal 
      Participant
      MemberContributor

      Fun Table . Thank you. Can you tell me how to make the dmd on the top of my cabinet playfield go away? It currently cannot be highlighted (show border) to make it smaller or drag it

      Bob it should go away on its own if the table detects that you have B2S. Otherwise you can change line 23 from Flasher23.Visible = True to Flasher23.Visible = False. If you want the movable vpinmame dmd you can change line 13 to VarHidden=0 too. The other option is that you can find this Flasher23 on the editor and unlock it and move it where you want.

      • This reply was modified 3 months ago by  rascal.
      #114957
       rascal 
      Participant
      MemberContributor

      Any chance to have a DMD for the cabinet mode?

      Thank you

      Damn it, I screwed that up, change line 27 from VarHidden=0:VarRol=0 to VarHidden=0:VarRol=1.

      • This reply was modified 3 months ago by  rascal.
      #114967
       Slydog43 
      Participant
      Member

      to remove dmd on cabinet mode add line

      Flasher23.Visible = False

      to line 33 (not sure why B2SON variable is not true)

      #114982
       dieman 
      Participant

      Great table,  when I start the game up in PinballX the Backglass does not show up, but if I start it up from my tables shortcut folder I have a backglass. Please help.

      #115006
       naeromagus 
      Participant
      Member

      Common issue with Pinballx. Go into vpx set graphics options and clicks force full screen. It works for me on tables that won’t show backglass. It also improves vpx performance

      #115053
       h0pp4z 
      Participant

      oops… wrong file…

      Thank you…

      • This reply was modified 3 months ago by  h0pp4z.
      #115056
       rascal 
      Participant
      MemberContributor

      Is there a way to get the vbs-file mentioned in the script header? :scratch:

      controller.vbs comes in the script folder when you download vp10.

      #115162
       randr 
      Keymaster
      ModeratorMember

      Keeps getting better! thanks @rascal

      ********************************************************
      Messing with the VPinball app and push notifications.
      So if you haven't downloaded app yet what are you waiting for!?
      *******************************************************

      #115307
       eMBee 
      Participant

      Does anyone has a wheel for this one?
      I can do my PS trick, but it will be next week…

      #115311
       innertwist 
      Participant

      Does anyone has a wheel for this one?

      I can do my PS trick, but it will be next week…

      There is one in this wheel pack: https://vpinball.com/VPBdownloads/wheel-pack-2017-stat/

      1 user thanked author for this post.
      #115314
       STAT 
      Participant
      MemberContributor

      rascal, it is easy to set Objects to in/visible, look at the top in Script, there is …

      If Table1.ShowDT = true then
      VarRol=0:VarHidden=0
      Textbox1.visible = True
      Textbox2.visible = True
      Textbox3.visible = True
      Else
      VarRol=1:VarHidden=0
      Textbox1.visible = False
      Textbox2.visible = False
      Textbox3.visible = False
      End If

      In your latest Version i also had Textbox1 in FS Mod, just added this one above in bold.
      That means, it should not be visible in FS Mod – only DT Mod.

      Hidden=1 at DT is also not correct, DMD should Always be visible, changes in bold  :bye:

      • This reply was modified 2 months, 4 weeks ago by  STAT.
      #115513
       roccodimarco 
      Participant
      Member

      How can I get rid of these three number columns? I have been trying to figure this out for a few days now and I can’t get rid of them!

       

      71B3D99D-408A-44CA-B367-98E6035D3D02

      • This reply was modified 2 months, 4 weeks ago by  roccodimarco.
      #115531
       rascal 
      Participant
      MemberContributor

      How can I get rid of these three number columns? I have been trying to figure this out for a few days now and I can’t get rid of them!

      71B3D99D-408A-44CA-B367-98E6035D3D02

      I don’t think you can, unless you display it in a flasher on the table like I had it.

    Viewing 20 posts - 1 through 20 (of 26 total)

    You must be logged in to reply to this topic.

  • Please login to download.

  • ©2019 VPinBall.com

    WP Facebook Auto Publish Powered By : XYZScripts.com
    Vpinball.com

    Log in with your credentials

    or    

    Forgot your details?

    Create Account