• Don't forget to rate 1-5 stars! Check the support tab for any help or comments.

  • (7)
    « »

    This is a VPX conversion of LoadedWeapons VP9 desktop table. There are new plastics and other graphical upgrades. The desktop backdrop is courtesy of lazzlo.

    Controls:

    Arrow Left: Left Oar

    Arrow Right: Right Oar

    Arrow Down: Fire

    Arrow Up: Power (when flashing)

    1.1a

    -Correct 1.1 file uploaded.

     

    1.1:

    -Required VBS file included.

    -Removed text box in cabinet mode and backglass will automatically load. (Thanks STAT)

    -Adjusted orbit so the ball will land in the left lane with a good shot. This is required to activate center lights (Change dip switch 6 to activate a center light with only an orbit shot).

    -Lowered flipper angle slightly.

    -Widened drain area so missed ball doesn't bounce back into play area.

    -New speaker image in cabinet mode.

    -New front control panel image for cabinet mode.  Adjust the view to reveal this image (see alternate Picture).

    -Paddle lights stay on during game except when ball is in play.

    -Minor graphical and physics touch ups.

    This topic contains 37 replies, has 11 voices, and was last updated by  Imh0tep 3 months, 1 week ago.

    Viewing 20 posts - 1 through 20 (of 38 total)
    • Author
      Posts
    • #122843
       DarthMarino 
      Participant

      This is a VPX conversion of LoadedWeapons VP9 desktop table. There are new plastics and other graphical upgrades. The desktop backdrop is courtesy of lazzlo.

      15 users thanked author for this post.
      #122846
       STAT 
      Participant
      MemberContributor

      WOW thanks, now that was fast :good:

      Thanks Man, thanks to lazzlo and also LW for the prev. Works :bye:

      I try to get the directb2s done a.s.a.p …

      1 user thanked author for this post.
      #122880
       randr 
      Keymaster
      ModeratorMember

      strange! i dont have the granny.vbs

      ********************************************************
      Messing with the VPinball app and push notifications.
      So if you haven't downloaded app yet what are you waiting for!?
      *******************************************************

      #122881
       STAT 
      Participant
      MemberContributor

      Is needed for directb2s Players: Set Controller=CreateObject(“B2S.Server”)

      Maybe also you can delete Line: SetDisplayToElement TextBox1
      and move TextBox1 out of PF …
      You Need the Granny.vbs File ? See below …

      I tried to get it working with the Controller.vbs, no success at the Moment :unsure:

      IMG_20190405_230623

      Attachments:
      #122884
       randr 
      Keymaster
      ModeratorMember

      Thanks! Works like a charm

      ********************************************************
      Messing with the VPinball app and push notifications.
      So if you haven't downloaded app yet what are you waiting for!?
      *******************************************************

      #122887
       DarthMarino 
      Participant

      I will include granny.vbs with the next update.

      1 user thanked author for this post.
      #122888
       Thalamus 
      Moderator
      ContributorMemberModerator

      Very nice guys – thank you both @stefanaustria and @darthmarino

      #122903
       DarthMarino 
      Participant

      Another change for the update…. The ball is supposed to go around the orbit and land in the leftmost lane to light one of the canoe lights in the middle.  I tweaked it so it does that now.  Otherwise there is practically no way to get an extra ball (unless you turn on dip switch 6).

      #122906
       DarthMarino 
      Participant

      Is there any reason the backglass wouldn’t work with this code?  If I take out all the if/else stuff and just set the controller to B2S.Server then it pops right up.

       

      Option Explicit LoadVPM “01530000”,”Granny.vbs”,3.1

      dim B2Son
      B2Son=true

      Sub LoadVPM(VPMver,VBSfile,VBSver) On Error Resume Next If ScriptEngineMajorVersion<5 Then MsgBox”VB Script Engine 5.0 or higher required” ExecuteGlobal GetTextFile(VBSfile) If Err Then MsgBox”Unable to open “&VBSfile&”. Ensure that it is in the same folder as this table.”&vbNewLine&Err.Description:Err.Clear

      If B2Son=true then
      Set Controller=CreateObject(“B2S.Server”)
      Else
      Set Controller=CreateObject(“VPinMAME.Controller”)
      End If

      If Err Then MsgBox”Can’t Load VPinMAME.”&vbNewLine&Err.Description If VPMver>”” Then If Controller.Version<VPMver Or Err Then MsgBox”VPinMAME ver “&VPMver&” required.”:Err.Clear If VPinMAMEDriverVer<VBSver Or Err Then MsgBox VBSFile&” ver “&VBSver&” or higher required.” On Error Goto 0 End Sub

      #122907
       randr 
      Keymaster
      ModeratorMember

      You should probably use controller.vbs instead

      ********************************************************
      Messing with the VPinball app and push notifications.
      So if you haven't downloaded app yet what are you waiting for!?
      *******************************************************

      #122912
       DarthMarino 
      Participant

      Instead of granny.vbs? The solenoid call outs give me errors if I do that.

      #122918
       Thalamus 
      Moderator
      ContributorMemberModerator

      No, you use controller.vbs for the db2s stuff. And the granny – look at what I wrote recently in another thread.

      https://vpinball.com/forums/topic/vp9-table-question/#post-122857

      #122932
       topache 
      Participant

      Why does my table show a black box with a zero and a gray box above the table?

      #122933
       randr 
      Keymaster
      ModeratorMember

      Desktop text box. Just click backdrop in editor and drag box off to the side

      ********************************************************
      Messing with the VPinball app and push notifications.
      So if you haven't downloaded app yet what are you waiting for!?
      *******************************************************

      #122935
       topache 
      Participant

      Thank you.

      That worked for the black box, that was easy. However the gray box above the play field I see it faintly in the backdrop but I can’t do anything with it. How do I get rid of that?

      Also how do you activate the power button?

      #122946
       STAT 
      Participant
      MemberContributor

      Gray Box above in FS, Change this …

      SetFS

      Power Button, should be Key Up or Down.

      #122947
       STAT 
      Participant
      MemberContributor

      DarthMarino, for your next Update, Maybe you also could add something like this:

      If Table1.ShowDT then
      TextBox1.Visible = True
      Else
      TextBox1.Visible = False
      End If

      and Maybe also:

      SetDisplayToElement TextBox1 ‘ Change to >>
      If B2SOn = false Then SetDisplayToElement TextBox1

      Or complete inside here … :

      If Table1.ShowDT then
      TextBox1.Visible = True
      SetDisplayToElement TextBox1
      Else
      TextBox1.Visible = False
      End If

      #122957
       DarthMarino 
      Participant

      Thank you.

      That worked for the black box, that was easy. However the gray box above the play field I see it faintly in the backdrop but I can’t do anything with it. How do I get rid of that?

      Also how do you activate the power button?

      The gray box above the playfield is supposed to be a speaker grill.

      ggspeaker

      I put the controls in the installation section. You drop the five yellow targets and shoot the ball into the saucer and the power button will start blinking.

      #122958
       DarthMarino 
      Participant

      DarthMarino, for your next Update, Maybe you also could add something like this:

      If Table1.ShowDT then

      TextBox1.Visible = True

      Else

      TextBox1.Visible = False

      End If

      and Maybe also:

      SetDisplayToElement TextBox1 ‘ Change to >>

      If B2SOn = false Then SetDisplayToElement TextBox1

      Or complete inside here … :

      If Table1.ShowDT then

      TextBox1.Visible = True

      SetDisplayToElement TextBox1

      Else

      TextBox1.Visible = False

      End If

      Good call on the ShowDT option.  It seems to be also working for the backglass:

      If ShowDT=true then
      Set Controller=CreateObject(“VPinMAME.Controller”)
      else
      Set Controller=CreateObject(“B2S.server”)
      End if

      #122959
       topache 
      Participant

      Sweet that work thank you so much. However for the power button my up and down fires my left and right paddles, trying to figure out how I activate the power button when it’s lit

    Viewing 20 posts - 1 through 20 (of 38 total)

    You must be logged in to reply to this topic.

  • Please login to download.

  • ©2019 VPinBall.com

    WP2FB Auto Publish Powered By : XYZScripts.com
    Vpinball.com

    Log in with your credentials

    or    

    Forgot your details?

    Create Account