• Don't forget to rate 1-5 stars! Check the support tab for any help or comments.

  • (7)
    « »

    First of all Thank all those who once participated in the recreation of this table, Destruk and Tab (and many others), are the ones that have data that have worked, without them I would not have achieved anything, the image of the playfield is not of great quality, but this table I liked a lot for the thematic of street basketball, and also because it has no ramps, which is something that still not recreated, more than anything the reason for doing it is to continue learning and to give back a little of everything they gave me, I hope you enjoy it and if you find mistakes or something that looks bad (sure both will be) I would like very much to be indicated because it helps me to continue learning.

     

    PD: Use VPX 10.5 rev.3490 or higher, for correct functioning

     

    Thanks so much to:

    Assassin32 - Roccodimarco - Kiwi - Borgdog

    For help me to improve this table

    Fixed problem with ball that went up to apron

    High punctuation can now be used with the magnasave buttons (thanks roccodimarco for this)

    Height change apron area to avoid future problems

     

    This topic contains 24 replies, has 12 voices, and was last updated by  Micronaut 4 months ago.

    Viewing 20 posts - 1 through 20 (of 25 total)
    • Author
      Posts
    • #93834
       Kalavera3 
      Participant
      Member

      First of all Thank all those who once participated in the recreation of this table, Destruk and Tab (and many others), are the ones that have data that have worked, without them I would not have achieved anything, the image of the playfield is not of great quality, but this table I liked a lot for the thematic of street basketball, and also because it has no ramps, which is something that still not recreated, more than anything the reason for doing it is to continue learning and to give back a little of everything they gave me, I hope you enjoy it and if you find mistakes or something that looks bad (sure both will be) I would like very much to be indicated because it helps me to continue learning.

       

      PD: Use VPX 10.5 rev.3490 or higher, for correct functioning

       

      Thanks so much to:

      Assassin32 - Roccodimarco - Kiwi - Borgdog

      For help me to improve this table

      #93843
       randr 
      Keymaster
      ModeratorMember

      Neat table and I can say it has never looked better in vp. Thanks!

      Currently playing around with FP to VP conversions. Nothing serious just trying to have fun.

      #93851
       misfit 
      Participant

      Hey @kalavera3

      Tried to check out this table in my cab but it won’t run. I can load it up into VPX just fine, but when I try to play it nothing happens. Screen flashes for a split second and then goes away leaving me sitting back in the editor again. No error messages, no nothing. Any thoughts? I don’t think I’ve seen this particular behavior with any other tables on my rig. I couldn’t find any logs or anything that may point to a specific issue. Any tips or tricks on how to get any debugging info from VPX/VPM?

      #93853
       Kalavera3 
      Participant
      Member

      Hey @kalavera3

      Tried to check out this table in my cab but it won’t run. I can load it up into VPX just fine, but when I try to play it nothing happens. Screen flashes for a split second and then goes away leaving me sitting back in the editor again. No error messages, no nothing. Any thoughts? I don’t think I’ve seen this particular behavior with any other tables on my rig. I couldn’t find any logs or anything that may point to a specific issue. Any tips or tricks on how to get any debugging info from VPX/VPM?

      use the latest beta version of VP, maybe that will solve the problem

      1 user thanked author for this post.
      #93855
       misfit 
      Participant

      Hey @kalavera3

      Tried to check out this table in my cab but it won’t run. I can load it up into VPX just fine, but when I try to play it nothing happens. Screen flashes for a split second and then goes away leaving me sitting back in the editor again. No error messages, no nothing. Any thoughts? I don’t think I’ve seen this particular behavior with any other tables on my rig. I couldn’t find any logs or anything that may point to a specific issue. Any tips or tricks on how to get any debugging info from VPX/VPM?

      use the latest beta version of VP, maybe that will solve the problem

      Yep. That did the trick – all good now. I should have thought to try that myself, but I didn’t realize that a new beta had just dropped. The table plays really well. Thanks!

      #93869
       giovanni1966 
      Participant

      Thx for the nice table. It is not possible to enter a Highscore.

      #93879
       STAT 
      Participant
      MemberContributor

      Thanks Man, i also love Basketball Themed Tables :good:
      Looking very good, i will insert a few Coins at the evening … :yes:

      Should be nice with Wildman’s BG: http://vpuniverse.com/forums/files/file/2356-hoopspremier-1991

      #93896
       vicviper 
      Participant

      what is the latest version vp

      #93897
       Joey2001 
      Participant
      Member

      Hm, are you playing in desktop-mode?

      For me the table is unplayable. The ball is flying like a bird over the table. :bye:

      Here is a little video. I don’t change any settings and have all the latest updates.

      #93899
       Kalavera3 
      Participant
      Member

      I use rev3490 and dont have these problem, someone can help with this? Is a problem with the versión?

      #93900
       Kalavera3 
      Participant
      Member

      Problem with hiscore

      I could check it recently, it does not allow to change the letters with the buttons of the flipper, the truth is not how this is corrected, I will find out and as soon as I have a solution I correct it.

      #93914
       STAT 
      Participant
      MemberContributor

      I updated to 3490, and all is ok – good Work here :good:

      About the Hiscore, i think there was already a Problem, and someone solved it … Dozer, DJRobX ?
      I can’t remember …

      #93924
       Kalavera3 
      Participant
      Member

      I updated to 3490, and all is ok – good Work here :good:

      About the Hiscore, i think there was already a Problem, and someone solved it … Dozer, DJRobX ?

      I can’t remember …

      Thanks for the data Stephan I’m going to find if I find something, I know that the rom has problems because if you fix the marker in pinmame does not load, so it is not strange that you have some other problem

      #93961
       Joey2001 
      Participant
      Member

      So, it seems, I am the only one with this problem?

      I just updated to the actual VP5 minimal setup and nothing changed.

      The ball is flying over the table. :scratch:

      #93976
       Kalavera3 
      Participant
      Member

      So, it seems, I am the only one with this problem?

      I just updated to the actual VP5 minimal setup and nothing changed.

      The ball is flying over the table. :scratch:

      I would love to help Joey but the truth is that I do not know, someone else could help in this case, thank you very much.

      1 user thanked author for this post.
      #93981
       randr 
      Keymaster
      ModeratorMember

      @joey2001 you must have some key mapped strange or a controller plugged into you pc? show us your key prefrences in vp. Also make dang sure you updated all .vbs files in the scripts folder and NONE are located in the tables folder. but i would think you have some nudge button assigned strangely

      Currently playing around with FP to VP conversions. Nothing serious just trying to have fun.

      1 user thanked author for this post.
      #94054
       Joey2001 
      Participant
      Member

      @joey2001 you must have some key mapped strange or a controller plugged into you pc? show us your key prefrences in vp. Also make dang sure you updated all .vbs files in the scripts folder and NONE are located in the tables folder. but i would think you have some nudge button assigned strangely

      My other 650 tables don’t have that problem, but it could be some keymapping. I use the ultimarc i-pac 2-controller.

      Otherwise I start the table and don’t press any button. The ball jumps in the plunger lane and start wandering up the plunger… slow… :wacko:

      Here are my key settings. I also disabled the two settings for the mouse and ball flying, but that doesn’t change anything.

      I have the newest VP10.5 with all new script only in the scripts-folder.

       

      Attachments:
      #94071
       eMBee 
      Participant

      So, it seems, I am the only one with this problem?

      I just updated to the actual VP5 minimal setup and nothing changed.

      The ball is flying over the table. :scratch:

      I would love to help Joey but the truth is that I do not know, someone else could help in this case, thank you very much.

      I’m having the same issue as Joey2001… floating ball across the playfield.
      Did the latest update and checked if the script files where in the right place…

      Same here… it’s the only table witch has this floating ball thingy.

      #94086
       Kalavera3 
      Participant
      Member

      Wow I’m haunted, the truth is that I do not know why this can happen, Kiwi made a comantario about it somewhere else, maybe that helps, here I leave

      Just an idea.

       
      Select the “Gate2”, ball release output, and change the height from 45 to 50.
      Go to line 114 of the scripts and change the speed and direction of the release.

      bsTrough.InitKick BallRelease,90,5

      #94102
       BorgDog 
      Participant
      MemberContributorvip

      Try changing the “Overwrite  Physics by Global Set” to Disable.  that’s the only thing I see that may be causing that issue.  It was set for Set 3 or something like that… i’m not having the issue btw, works fine for me.

       

      Attachments:
      1 user thanked author for this post.
    Viewing 20 posts - 1 through 20 (of 25 total)

    You must be logged in to reply to this topic.

  • Please login to download.

  • ©2018 VPinBall.com

    WP Facebook Auto Publish Powered By : XYZScripts.com
    Vpinball.com

    Log in with your credentials

    or    

    Forgot your details?

    Create Account