• Don't forget to rate 1-5 stars! Check the support tab for any help or comments.

  • (22)
    « »

    "Hurry, hurry, hurry, step right this way!!!"

    Check out the script options at the top of the script.

    Toggle thru GI and flipper color modes with the left and right MagnaSave buttons. But remember this is just a preview. To switch permanently to a specific color mode you have to do these changes in the script options. 

    Special thanks to

    • OldSkoolGamer, ICPjuggla, JimmyFingers, Koadic: For creating a very cool VP9 build from where I borrowed some table elements and pieces of codes (especially the math code for the Juggler and the Ferris wheels)
    • OldSkoolGamer: For providing me all the artwork he designed for the VP9 build. Thx so much bro!
    • Cosmic80: For some help reworking the playfield and some plastics
    • Wrd1972: For bringing me back to VP and a lot ideas and stuff from his Dr. Dude build (the Dr. was my starting point for this build)
    • Flupper: For flasher domes template and his awesome Whitewater table, from where I borrowed stuff and ideas (like flipper bats and much more). And especially for his ramp tutorial, his mail support and help during my first steps in Blender
    • ClarkKent: For physics and aligning help. And some good advice and hint how accurate a VP author has to be ;-)
    • Dark, nFozzy and Knorr: For locknuts, bolts and screws
    • 32assassin: For the Juggler Box from his Hurricane WIP build
    • Sliderpoint: For ideas and resources from his Cyclone build
    • Dark: For the Williams apron template
    • Dark: For the gates primitives template
    • Ninuzzu: For the ball shadow code
    • DJRobX and RothbauerW: For some code in my script like the SSF routines
    • The one and only JPSalas: For all you are doing for the VP world. For the lamp code. And I'm sure I have some more code and/or ideas from you in my build ;-)
    • JimmyFingers: For some sound routines
    • Kiwi: For helping me adjusting some of the VP objects
    • tttttwii, Westworld and Thalamus: For beta testing and some good hints
    • VPX development team: For always lifting VP to the next level
    • All I have forgotten. Please send me a PM if you think I should add you to the 'Thx' section here. My fault!

    Hope you guys enjoy it. Have a lot fun with "Hurricane".

    Easter eggs in the table 😉

    • Sometimes when you enter the lit Hurricane ramp, you can see a picture of a cow accompanied with a moo, you can also get a picture of a huge eye.
    • Sometimes the unlit Ferris Wheel will get you an inchworm or four ducks.
    • Sometimes, about every 30th game or so, when you hit the "Mystery" shot to start the spinning wheel, the voice that normally says "Thrills, Chills, Magic, Prizes" will instead be a weird voice (sounds like Qbert) that says "Bubble, Bubble, Toil and Trouble". If it happens the first time on a particular game, then it will make the saying again the next two or three times you hit the Mystery wheel. Then it will go back to the normal voice and normal phrase.

    Visual Pinball 10.5 or higher.

    Check out the script options at the top of the script.

    Toggle thru GI and flipper color modes with the left and right MagnaSave buttons. But remember this is just a preview. To switch permanently to a specific color mode you have to do these changes in the script options.

    1.0.1: Some minor bug fixes

    • Added 4 missing DOF commands
    • Disabled flippers after startup
    • Added a missing balldrop sound when plunger kick is too weak
    • Fixed a visual ball issue on Apron

    1.0: Initial release

    This topic contains 46 replies, has 33 voices, and was last updated by  senseless 2 weeks, 4 days ago.

    Viewing 20 posts - 1 through 20 (of 47 total)
    • Author
      Posts
    • #125953
       Herweh 
      Participant

      "Hurry, hurry, hurry, step right this way!!!"

      Check out the script options at the top of the script.

      Toggle thru GI and flipper color modes with the left and right MagnaSave buttons. But remember this is just a preview. To switch permanently to a specific color mode you have to do these changes in the script options. 

      Special thanks to

      • OldSkoolGamer, ICPjuggla, JimmyFingers, Koadic: For creating a very cool VP9 build from where I borrowed some table elements and pieces of codes (especially the math code for the Juggler and the Ferris wheels)
      • OldSkoolGamer: For providing me all the artwork he designed for the VP9 build. Thx so much bro!
      • Cosmic80: For some help reworking the playfield and some plastics
      • Wrd1972: For bringing me back to VP and a lot ideas and stuff from his Dr. Dude build (the Dr. was my starting point for this build)
      • Flupper: For flasher domes template and his awesome Whitewater table, from where I borrowed stuff and ideas (like flipper bats and much more). And especially for his ramp tutorial, his mail support and help during my first steps in Blender
      • ClarkKent: For physics and aligning help. And some good advice and hint how accurate a VP author has to be ;-)
      • Dark, nFozzy and Knorr: For locknuts, bolts and screws
      • 32assassin: For the Juggler Box from his Hurricane WIP build
      • Sliderpoint: For ideas and resources from his Cyclone build
      • Dark: For the Williams apron template
      • Dark: For the gates primitives template
      • Ninuzzu: For the ball shadow code
      • DJRobX and RothbauerW: For some code in my script like the SSF routines
      • The one and only JPSalas: For all you are doing for the VP world. For the lamp code. And I'm sure I have some more code and/or ideas from you in my build ;-)
      • JimmyFingers: For some sound routines
      • Kiwi: For helping me adjusting some of the VP objects
      • tttttwii, Westworld and Thalamus: For beta testing and some good hints
      • VPX development team: For always lifting VP to the next level
      • All I have forgotten. Please send me a PM if you think I should add you to the 'Thx' section here. My fault!

      Hope you guys enjoy it. Have a lot fun with "Hurricane".

      Easter eggs in the table 😉

      • Sometimes when you enter the lit Hurricane ramp, you can see a picture of a cow accompanied with a moo, you can also get a picture of a huge eye.
      • Sometimes the unlit Ferris Wheel will get you an inchworm or four ducks.
      • Sometimes, about every 30th game or so, when you hit the "Mystery" shot to start the spinning wheel, the voice that normally says "Thrills, Chills, Magic, Prizes" will instead be a weird voice (sounds like Qbert) that says "Bubble, Bubble, Toil and Trouble". If it happens the first time on a particular game, then it will make the saying again the next two or three times you hit the Mystery wheel. Then it will go back to the normal voice and normal phrase.

      Total of 65 users thanked author for this post. Here are last 20 listed.
      #125955
       Genesis38 
      Participant
      Member

      Thank you Herweh and to everyone involved in creating this beautiful table! Talk about a coincidence, I just downloaded VP9 version of this table yesterday and you release this today, so awesome! Going to give it a spin, thanks again  :good:

      • This reply was modified 3 weeks, 5 days ago by  Genesis38. Reason: Forgot to thank you other members
      #125958
       randr 
      Keymaster
      ModeratorMember

      Fantastic! will give this a try right away. Thanks so much for this one :good:

      ********************************************************
      Messing with the VPinball app and push notifications.
      So if you haven't downloaded app yet what are you waiting for!?
      *******************************************************

      #125962
       Patrick2610 
      Participant

      Thank you so much for bringing this to VPX. Love this!!! :yahoo:

      And now, the Williams’ rollercoaster trilogy are completed in VPX format.

      #125966
       kds70 
      Participant
      Member

      Thanky you very much …. another sunday with “without” sleeping  :rose:   ;-)

      VPin: Williams Time Warp Cabinet (1979), Playfield: 40" Iiyama X4071UHSU, Backglass: 28" BenQ, Pin2DMD, Pincontrol 1, LEDWiz, Leaf Switches, Nudging, Tilt, Analoger Plunger, 8 Schütze / Knocker, PC: Intel Q6600@3Ghz, 8 GB Ram, Zotac GTX 1070 Mini, Win7 Prof.

      Real Pin: Eight Ball Deluxe LE (1982)

      #125968
       bjschneider93 
      Participant
      Member

      Thank you thank you thank you

      #125969
       Schreibi34 
      Participant
      Member

      Thanks Herweh! Love it!

      #125970
       DJRobX 
      Moderator
      MemberModerator

      Great to see you’ve come back, Herweh!    Thanks for the excellent table!

       

      #125971
       TerryRed 
      Moderator
      MemberContributorModerator

      Welcome back Herweh!

      Looks amazing! I never got around to playing this on VP9 much, so I look forward to trying it on the cabinet when I ever get time away from this course and can be back home.

      #125973
       Zedixair 
      Participant

      Thank you to people involved in the making of this table !

      #125981
       STAT 
      Participant
      MemberContributor

      Hurry, Hurry, Hurry, to the Download … wuow … Thanks Herweh & Team :good:
      Another Trilogy is complete, i love this Tables … (+Comet, Cyclone) … Great :rose:

      I also use your directb2s, Herweh B-)

      #125983
       Ben Logan2 
      Participant
      Member

      “We have a winner!” Thanks, Herweh and epic contributors.

      #125986
       Thalamus 
      Moderator
      ContributorMemberModerator

      Lucky enough to being let in on the early versions. Looked and plays great from the first version. Thank you Herweh ! :good:

      #125987
       STAT 
      Participant
      MemberContributor

      IMG_20190428_183024  :good:

      #125988
       vogliadicane 
      Participant
      Member

      Love it :good:

      #125989
       Malinas 
      Participant

      Really LOVE this table! Thank you for making Hurricane FUN again! <3 Great work!

      #125996
       TNT2 
      Participant
      Member

      “You’ve got an arm like a wet rag.”

      Well done!

      #125998
       Mark70 
      Participant
      Member

      What a comeback, awesome release!
      Thanks a lot

      --------------------------------------------------------------------------------------------------
      I am looking for T2 cabinet decals, please send pm for offers.
      --------------------------------------------------------------------------------------------------

      #126008
       JR 
      Participant

      Been waiting for this one!!  …and now I have to wait some more.  Off to do yard work.  But looking forward to trying this out tonight.  Thanks Herweh!!

      #126009
       Genesis38 
      Participant
      Member

      Who was responsible for the sounds and SSF!?!? I ask because they are truly unbelievable!! I feel the ball hitting every area of the table and the wire ramp ball sounds has left me speechless. You guys are freaking gods let me tell you. This hobby has become worst than Crack 😂. Not that I would know of course, figure of speech.

      • This reply was modified 3 weeks, 5 days ago by  Genesis38.
    Viewing 20 posts - 1 through 20 (of 47 total)

    You must be logged in to reply to this topic.

  • Please login to download.

  • ©2019 VPinBall.com

    WP Facebook Auto Publish Powered By : XYZScripts.com
    Vpinball.com

    Log in with your credentials

    or    

    Forgot your details?

    Create Account