• Don't forget to rate 1-5 stars! Check the support tab for any help or comments.

  • Don't forget to "THANK" or "LIKE" the Author's 1st post in support topic.

  • (28)
    « »
  • Download Info

    Thumb
    • Author: Daryl
    • Version: 1.05
    • Views: 8101
    • File size: 740.94 MB
    • Downloads: 6471
    • File Author: Allknowing2012
    • Updated: June 23, 2020
    • Categories:
  • Sounds and Video and new Backglass Images for Munsters 2020 (Stern/Tribute) Table.

    1.05 - added audio to the tv clips You *might not* want to overwrite your screens.pup file!!!

    Currently, there are 0 users and 0 guests visiting this topic.
    Viewing 20 posts - 1 through 20 (of 56 total)
    • Author
      Posts
    • #176346
      Daryl
      Participant
      @allknowing2012
      Member

      Sounds and Video and new Backglass Images for Munsters 2020 (Stern/Tribute) Table.

      1.05 - added audio to the tv clips You *might not* want to overwrite your screens.pup file!!!

      Total of 33 users thanked author for this post. Here are last 20 listed.
      #176377
      charlieshakur
      Participant
      @charlieshakur
      Member

      Does this fix the layout issues

      #176378
      DeathInc
      Participant
      @deathincclan
      Member

      I am not getting any scores on the DMD. I am getting videos and the scoreboard.  But no actual text.  Version 102 was fine with scores and stuff on DMD.  Not so much 103.  Unless its just me.  And yes, I am using 3 screed Full DMD.

      #176393
      shanea1
      Participant
      @shanea1

      I am not getting any scores on the DMD. I am getting videos and the scoreboard. But no actual text. Version 102 was fine with scores and stuff on DMD. Not so much 103. Unless its just me. And yes, I am using 3 screed Full DMD.

      I’m the same here no scoring on my setup

      #176406
      outhere
      Moderator
      @outhere
      MemberContributorvipModerator

      General information

      If you’re trying to use ultradmd you have to make a folder in the tables folder  –>  mmunsters.UltraDMD

      Comment out This section – Approximate line is  6745

      Sub UltraDMDTimer_Timer 'used for the attrackmode and the instant info.
      If turnonultradmd = 0 then exit sub
      If bInstantInfo Then
      InstantInfo
      ElseIf bAttractMode Then
      ElseIf NOT UltraDMD.IsRendering Then
      DMDScoreNow
      ElseIf bromconfig Then
      romconfig
      End If
      End Sub

      2 users thanked author for this post.
      #176417
      DeathInc
      Participant
      @deathincclan
      Member

      Thank you Outhere, I will try tonight when I get home. And no, I do not use ultra Dmd on this table.

      #176465
      Slydog43
      Participant
      @slydog43
      Member

      Why is the DMD display being displayed in the Pup Game/Info screen?  maybe so you can use ultraDMD also?

      #176499
      NailBuster
      Moderator
      @nailbuster
      ModeratorMember

      for people with PUP display/position questions:  you should not modify anything in table script for PUP position. Make sure you are download the latest puppack (media files) .

      This table default pup layout is for 3 screen users that have a FULLDMD (16:9) type lcd display…. should work out-of-box.

      if you do NOT have the above layout(you have a realdmd or 4:1 lcd dmd),  you need to grab the 3 pup files in the 2screen.zip file within root of updated puppack.  and replace the 3 files in the root of the pupack.    that’s all.

      *if you do have a FULLDMD lcd and the dmd is not filling up your screen then you need to setup configdisplays.bat (pup settings) so that your music pupdisplay is taking up the entire FULLDMD area. (most packs will use your music screen location for FULLDMD option).

      5 users thanked author for this post.
      #176506
      studlygoorite
      Participant
      @studlygoorite
      Member

      Nice table, looks and plays great. Now off to get my initials up in Orbital. Thanks

      #176509
      makmak
      Participant
      @makmak
      Member

      well, I have 3 screens…. and it does not work out-of-box. downloaded actual table and puppack (1.03a).its the only puppack on my machine that does not work.

      Backglass background is there, topper is there, playfield is there with the backglass overlay (in correct size), which should be somewhere on top of the backglass. DMD area is empty. i can move the overlay-image by mouse, but not the writing (points and so on). I remember having the same issue with “stranger things” but cant remember how i solved it :-(.

      Ill better wait for the next version, I am not in a hurry ;-)

      #176513
      DeathInc
      Participant
      @deathincclan
      Member

      Same here. Everything is there, but the writing, points.  Even the movie screen when you lose the ball is blank. It wasn’t on version 1.02. It told you all the bonuses you got. Now nothing.

       

       

      *****Fixed*****

      When I tried this updated PuPpack the new 103a table was not released yet.  So I was using it with the 102 release.  Since updating to the 103a table.  All is good.  So the confusion was the table I was using and not the Pup Pack.  Sorry for the mix up.

      #176561
      outhere
      Moderator
      @outhere
      MemberContributorvipModerator

      Do you have your music screen on your DMD Monitor?
      Maybe you need to use this  – http://www.nailbuster.com/wikipinup/doku.php?id=pinup_pack_layout

      #176604
      Oldschool4
      Participant
      @oldschool4
      Member

      The new release works great on my setup 2 screen,pin2dmd, no script change needed,3 files swapout done. :good:

      #176699
      David
      Participant
      @zedrummer

      Hello and thanks for this great table.

      Sorry on my 2screen+Pin2DMD setup, I have nothing on the Pin2DMD, only the rectangle with scores on the BG.

      #176700
      newtopinball78
      Participant
      @newtopinball78
      Member

      I don’t know how others are getting to work out of the box..I extracted the zips for and tested for 2 screen and 3 screen setup but dmd displaying on backglass still. I had to modify script line 868. I downloaded latest table and puppack. I don’t use a topper so you have option at beginning of script to turn off.

      Const pDMD=2 (default is set to 1)
      Const pBackglass=1 (default is set to 2)

      This is what worked for me.

      #177073
      Jack
      Participant
      @breikers

      Hi guys, kinda new to the pup system. But nothing is showing up when I run the table. Copied the pack to pupvideos. Other pup packs are working… Any ideas ?

      #177272
      blackvulcan3
      Participant
      @blackvulcan3
      Member

      if you do NOT have the above layout(you have a realdmd or 4:1 lcd dmd),  you need to grab the 3 pup files in the 2screen.zip file within root of updated puppack.  and replace the 3 files in the root of the pupack.    that’s all.

      Thanks nailbuster, do you means that 3 screen 4:1 users (like me) will have to use the table without a DMD in 2 screen mode using the files from this https://vpinball.com/VPBdownloads/munsters-2-screens-alternate-pup-vid%c3%a9o-bg-stern-style/

      or will it still be on three screens, not at my cab for another 10-12 hours, so just checking prior to updating. I have everything working with 1.03 but my 4:1 LCD screen has very small fonts, so hence the reason I’m checking out the post. Thanks, BV3.

      EDIT – I gave this a try and it did just move my DMD to the backglass. It didnt increase the font so it was small on both 2 or 3 screen. I’ve reverted back to 3 screen setup with the DMD on the 3rd screen by just removing the custom position of the DMD in PUPpack editor (obviously removing the now 2 screen version puppack and restoring the 3 screen version). The same issue remains is that the font is small, but the preference for me is to have something on the 3rd screen, if the font size can be manipulated in the source for 4:1 users that would be awesome, but understand if that is a big ask. Thanks Daryl for the table and Nailbuster for the initial reply.

      #177419
      mdienstl
      Participant
      @mdienstl

      Does anybody have a link to the 3 Screen pup pack?

      Martin

      #177425
      Badazzwi
      Participant
      @badazzwi
      Member

      This is the thread for the puppack. The link is at the top of the first post.

      Hi my name is Barry and I'm a virtual pinball addict.

      #177529
      bha19
      Participant
      @bha19
      Member

      Do I just unzip the Munster folder and where do I put it?

    Viewing 20 posts - 1 through 20 (of 56 total)
    • You must be logged in to reply to this topic.
  • Please login to download.

  • ©2020 VPinBall.com

    Log in with your credentials

    or    

    Forgot your details?

    Create Account

    The Vpinball app

    FREE
    VIEW