VPB Downloads

My direct.b2s for The Witcher (siggi mod table 2020) table Authentic: Picture from backround descktop mode. Fanatasy: Mix with pictures from w.w.w. Just for fun   Read More

A minimal VR Room for The Getaway by Williams, based on the VPX version by Ganjafarmer with help from flupper, 32assassin and nfozzy. This is one of my favorite tables, and one I keep going back to when I want a quick blast, and this version is optimised for VR performance as the speed of the table certainly needs it! Enjoy!   Read More

A minimal VR room for Cactus Canyon by Bally based on the VPX version by ninuzzu and Tom Tower. There is a VR version already, but it was done early in VR development when it wasn't fully understood what caused performance issues with VR rooms and tables. I'll be redoing a few more of my favorite tables because of this. Enjoy!   Read More

Harry Potter Tarcisio Wheel

This is an update of a conversion already carried out by Arconovum (Nick). The original table is from 32assassin (Thanks). It had a problem in the right cannon that could not eject the ball through the "left ramp / trail", I did a review and solved the problem. Anyway, Nick helped me in the final review of the Backglass lighting, thank you so much for this. Well, the final result of BG is not perfect, but it is good to play. I hope everyone can enjoy the table in this FSS format. Thanks to everyone involved in creating Visual Pinball and creating the tables, without you the fun would not be the same.   Read More

The PinEvent and ULTIMATE Pro Pinball tables are very special.  I had a hard time finding PinUP Popper media for the tables I downloaded, so I decided to make a small contribution.  Most of the files were recorded from my cabinet, with the exception of a few found using PinUP Popper.  There are 30 MP4s in each zip recorded at 30 fps. Backglass:  1366x768 Playfield:  1920x1080 I would like to thank TerryRed, SLAMT1LT, Nailbuster, and the entire virtual pinball community for creating something uniquely special for everyone to enjoy.  All of your contributions, time, attention to detail, and creative efforts are appreciated!   Read More

This is a modification of the Dark’s Mod table, conversion to the FSS (Full Single Screen) format by me. The original table was made by jipeji16 and another great team, which you can see in the original post right here on vpinball. All the modification was done through Nick's guidelines (Arconovum). Thank you very much for the guide videos. Well, I hope you like it, you can improve it, but it's a great start to have fun in this table format. Obs: The lighting of BG I believe is very close to the original. It was based on the B2S lighting done by HauntFreaks, Wildman, bassgeige (Thanks). Thanks to everyone involved in creating Visual Pinball and creating the tables, without you the fun would not be the same. *From now on in File Author, I will also place the author of the original table in addition to mine, I would do that in the text, but I will also include this point. *My native language is portuguese, so if the English got bad, I'm sorry.     Read More

***Rev 2. 0 - New backbox, backglass lighting changes and playfield lighting improvement.   This is a modification of the JPSalas table, conversion to the FSS (Full Single Screen) format by me. All the modification was done through Nick's guidelines (Arconovum). Thank you very much for the guide videos. Well, I hope you like it, you can improve it, but it's a great start to have fun in this table format. As a good Brazilian, I will pay tribute to the Brazilian tables. this is the first one. I believe that the FSS modification of the great JPSalas table it was great too. Obs: The original light of the BG is static, so it was created fansia lighting good base in B2S from Wildman and Carlos Guizzo. Thanks to everyone involved in creating Visual Pinball and creating the tables, without you the fun would not be the same. *From now on in File Author, I will also place the author of the original table in addition to mine, I would do that in the text, but I will also include this point. *My native language is portuguese, so if the English got bad, I'm sorry.     Read More

Space Jam Tarcisio Wheel

Salut ceci est ma premiere table . Merci a Javier pour la table utilisé (Sonic) Ceci est une table pour enfant de la serie Pat' patrouille . La table originale est de Javier que j'ai modifié pour mon fils fan de la serie . Bon courage au parents . Bon jeu . Pour tout probleme n'hesiter pas a commentez ou Mp.     [EN]Hi, This is my first mod table . Thanks to javier for the original Sonic Table . It's a child table paw patrol in french version. BG in the archive. Good Game For any probleme contact me.   Read More

The source table used in this mod was put together by a handful of really talented developers listed below. My contributions were very minor by comparison.. primarily providing a slightly higher resolution playfield. Updates for this mod: Higher res Playfield. Stitched, tweaked and fit to the existing table's pf Realignment of inserts higher res apron and apron decals Adjustments (mostly graphics) to the "crossbow" ball launcher [This one might be a bit contentious] I turned off most of the many aftermarket mods that have been added to this table by various previous authors.  This included: various playfield signs and decals, the crossbow model with laser sight, animated bicycle girl, animated head in the barn, full playfield shadows, etc. There are still a few that I left on and all of the ones that were removed can be easily turned back on (most are at the top of the script file with steps to re-enable). The playfield isn't super high-res and could be improved considerably, but I believe it is a decent option at the time of this build.  Even though some components from the source table are masterfully crafted (lighting and 3d models are incredible on this table) plenty of additional tweaks could be made to enhance it further such as insert work, more apron work, more crossbow/ball launcher tweaks and other adjustments. Dozer, a primarily contributor to the source table used in this mod, is (to the best of my understanding) no longer part of the community and as such, this mod is being released with the hope that it is in-line with what the original authors' would approve of. If any admins on the download sites, previous contributors to this table or leaders in the community wish to see this mod removed, please let me know and I can take it down. Below are the original credits taken from the scripts file of the source table. I am unsure if additional developers contributed since I could not find any additional info on the particular version downloaded, but I would be happy to update this list if anyone wants to inform me of any missed contributors. ****************************************** TABLE BY ICPJUGGLA AND FRENETICAMNESIC SCRIPT BY FRENETICAMNESIC AND GTXJOE MODELS BY FRENETICAMNESIC, RANDR, FLUPPER, DARK, AND ZANY RESOURCES PROVIDED BY NORTHVIBE, URIELL, PAULO, AND PINBILL LE Conversion By Dozer - 3D Models / Ramps / Tex by DARK / Flupper Crossbow Technical Support provided by PinBill   Read More

freneticamnesic did most of the work since it was his work in progress. And jpsalus gave me some tips.I help with the phixs and some light and Rx2006je did light fix  and reach me to get it finalize . Enjoy 1.1 Fixed drop target lights. 1.2 drop targets on  fixed   Read More

I love Batch's Accept (Germany) table. So here is a 1280X320 topper or dmd for it.  Get your Pinballs to the wall man!   Read More

A minimal VR room for the amazing Star Trek The Next Generation by Williams. Knorr and Clark Kent did an amazing job of bringing my favorite pinball table to life in VPX! It's the pinball table I played more than anything else in the arcade back in the day (being a huge Star Trek fan too!), so this one was a no brainer to do. I'd have done it sooner, but Rawd and Steely have fancy VR room under construction, but as it's still some time away he said it was fine if I released my conversion and share it :) Enjoy!   Read More

Graphical Mod of Pinball58's table(mod of Bigus1's, ma1299's mod) based on Eric's(Ebislit's) new playield scan. I want to give special thank to Ebislit he is an amazing guy, his continues helps, interests inspired me doing this mod. Here are the changes: Playfield, plastics, apron, lights and the things i forgot already. About Permissions/Present W.I.P -s: i spoke to Skitso and G5k too, they said ok for this mod, also i sent the resources to G5k Too. Enjoy playing this at least as much than i am :)   Read More

V1.0 Space Jam (Sega 1996) authentic & fantasy DB2S you will find two versions on the same DB2S: authentic & fantasy the choice is yours right click on the db2s and in the options at the top you put authentic or fantasy   Read More

SpaceJam PuPPack Thanks go to -STARTX -RichT, -Bambi Plattfuss This PuPPack requires Pinup Popper and Pinup Player installed and updated to 1.4.5 or higher. System: Visual Pinball X (version 10.6+) Features: -different options to fit your setup(default setup is for 3 Screen user with Lcd DMD and Topper) in the PupPack are PUPConfigfiles..zip you can overwrite the Existing files in your PUPackroot folder to use them . PuPconfig_2 Screen_notopper_norealdmd (for 2 Screen user without real dmd and without topper.) PuPconfig_2Screens_realdmd-withoutTopper (for real dmd user without topper) PuPconfig_3Screens_MaxPack (thats default Setup Action on all Triggers inkluded Topper) -works with all cabinet configurations (DMD can be positioned in the bottom text area if required there fore use the PuPconfig_2Screens_withoutRealDMD-withoutTopper file. REQUIREMENTS: Visual Pinball X 10.6 or higher PinMAME 3.2 beta or higher installed: PINUP SYSTEM (1.4.5 or higher): INSTALLATION: Ensure there are no files in your "PUPVideos" "Spacejam" folder (if that folder already exists). Copy the PuP-Pack "Spacejam" folder from the archive into your PUPVideos folder.     Read More

This 4:3 backglass is made for Avengers Pro VPX PUP Pack by Harlan Russo, John Memeo, Joey Beaulieu and Sneakily1. You did a great job. Download: https://vpinball.com/VPBdownloads/avengers-pro-vpx-pup-pack/ Special Thanks goes to John Memeo for his advice and MovieGuru for beta testing.   Read More

Classic Gottlieb roto target mesh for table authors. This is a properly scaled round-target version with marbled plastic. This was used as early as the mid-1950s. Later versions had square targets. For VP the unit sits at -142 z and spins on objroty. Looks bad if you have screenspace cranked up too high so keep it between .25 and .33. "The roto unit has fifteen targets radially mounted on a rotating disc, with up to three targets projecting above the playfield. When the solenoid is energized, the drive lever arm engages the drive pawl with the drive gear of the ratchet which spins the target disc." source scan courtesy of adolpho   Read More

Made from backglass image

My take on this wheel image, there's 3 different styles.

First go at this, just a wheel for a game that I couldn't find one for.

A wheel for the Dimmu Borgir table created by Zedixair because I couldn't find one for it.

A minimal VR Room for World Cup Soccer from Bally, using the superb version of the table by Knorr and Clark Kent. I've been playing with this one on and off for a while as it needed some special attention, but I think it's finally looking great in VR now :) **IMPORTANT** You need to set VPVR to "Scale table to width" in "VR Settings" for it to display properly, otherwise the table will be teeny tiny! Enjoy!   Read More

Quick Back glass  for the Witcher from a wallpaper jpg from JR

For excellent table by Siggi

1. This is a heavy mod of 32assassins Cosmic Gunfight table. He builded this table , i only made the mod.   2. Thanks to 32assassin for his permission to mod and his help with my little scripting problem. I really appreciate it.   I love The Witcher and with a little help from YouTube i've heard all the audiobooks of Gerald and Ciris adventures while making this mod.   As always i made a new playfield, new plastics, bumpers and apron texturs. This time i changed a little bit more: Build in a new skillshot, changed the positions of the drop targets, changed left ejecthole, made a new slingshots geometry and a lot more. So this table plays very different to Cosmic Gunfight.   There are different textures for the apron and the bumpers still in the table. You can change them in the editor if you like.   I hope you like it and keep on playin' pinball.   Siggi   All Logos, Copyrights and Trademarks are property of their respective owners.  PROVIDED STRICTLY FOR PERSONAL / HOME USE AND NOT FOR COMMERCIAL SALE / RE-SALE OR DISTRIBUTION!   Read More

This is a modification of the Bigus1 and Javier table, conversion to the FSS (Full Single Screen) format by me. All the modification was done through Nick's guidelines (Arconovum). Thank you very much for the guide videos. Well, I hope you like it, you can improve it, but it's a great start to have fun in this table format. Obs: The lighting of BG I believe is very close to the original. It was based on the B2S lighting done by Hauntfreaks (Thanks).  Thanks to everyone involved in creating Visual Pinball and creating the tables, without you the fun would not be the same. *From now on in File Author, I will also place the author of the original table in addition to mine, I would do that in the text, but I will also include this point. *My native language is portuguese, so if the English got bad, I'm sorry.     Read More

This is a modification of the allknowing2012 table, conversion to the FSS (Full Single Screen) format by me. All the modification was done through Nick's guidelines (Arconovum). Thank you very much for the guide videos. Well, I hope you like it, you can improve it, but it's a great start to have fun in this table format. Obs: The lighting of BG I believe is very close to the original. It was based on the B2S lighting done by allknowing2012 (Thanks).  Thanks to everyone involved in creating Visual Pinball and creating the tables, without you the fun would not be the same. *From now on in File Author, I will also place the author of the original table in addition to mine, I would do that in the text, but I will also include this point. *My native language is portuguese, so if the English got bad, I'm sorry.       Read More

This is a modification of the jipeji16 table, conversion to the FSS (Full Single Screen) format by me. All the modification was done through Nick's guidelines (Arconovum). Thank you very much for the guide videos. Well, I hope you like it, you can improve it, but it's a great start to have fun in this table format. Obs: The lighting of BG I believe is very close to the original. It was based on the B2S lighting done by chucky87 (Thanks).  Thanks to everyone involved in creating Visual Pinball and creating the tables, without you the fun would not be the same. *From now on in File Author, I will also place the author of the original table in addition to mine, I would do that in the text, but I will also include this point. *My native language is portuguese, so if the English got bad, I'm sorry.         Read More