VPINBALL Downloads (1774)

Logo topper

Teenage Mutant Ninja Turtles (Data East 1991) wheel collection I haven't made a wheel image in a while so here's 3 to choose from there are all made from vector files so there nice and clean there's even a round wheel using Tarcísio's template wheel   Read More

Teenage Mutant Ninja Turtles (Data East 1991) alt 3scn b2s this is an alternative layout of the TMNT BG it moves the bonus lights onto the BG so the dmd can be used for the display.... this of course can be used for 2 screen's as well 2 or 3 screen 2k images authentic bulb placement accurate flashers   Read More

First of all Thank all those who once participated in the recreation of this table, Destruk and Tab (and many others), are the ones that have data that have worked, without them I would not have achieved anything, the image of the playfield is not of great quality, but this table I liked a lot for the thematic of street basketball, and also because it has no ramps, which is something that still not recreated, more than anything the reason for doing it is to continue learning and to give back a little of everything they gave me, I hope you enjoy it and if you find mistakes or something that looks bad (sure both will be) I would like very much to be indicated because it helps me to continue learning.   PD: Use VPX 10.5 rev.3490 or higher, for correct functioning   Thanks so much to: Assassin32 - Roccodimarco - Kiwi - Borgdog For help me to improve this table   Read More

Teenage Mutant Ninja Turtles (Data East 1991) b2s standard 2 or 3 screen 2k images authentic bulb placement accurate flashers      Read More

Cheesy wheel to go with my table.  

Transformers (Stern 2011) alt b2s since I couldn't find a good BG image of the original I made this alternative fantasy b2s   Read More

Transformers (Stern 2011) Detail Mod as always any modded table of JP's 99% of the credit goes to JP reworked playfield so the correct right hand pro ramp could be used FP ramps were used, texture modded by Draifet left and right ramps detailed and modded to be "close" to the real machine 3D rendered shadows and ambient lights by Bord new lighting and domes flipper and ball shadows normal maps added to all the models for more detail added sounds fast flips enabled this is one of those tables that's just not 100% to the real machine, so don't expect it to be again thanks, JP, Draifet, Bord and everyone that found real machine photos   Read More

I started making wheels for Loserman's Super Soccer and Soccer tables. This isn't done, but I thought I'd share it now.  I'll make a Super Soccer version as well.   Read More

Gottlieb's Tag-Team.  I recently stumbled across an old thread, where creators were testing out tables in the infancy of vpx.  In that thread was a Tag-Team table, and I fired it up and to my surprise the table plays fine!  I did make some minor tweaks to try and match videos I watched on this very addictive table.  I was a big fan of the vp9 tables, but it never "felt" right and I was constantly tweaking it.  I can say, this version plays great and just feels nice.  I went through this table and cleaned it up to the best of my photoshopping abilities, so while not perfect, it looks much better than it previously did. I have played through the game and can confirm multi ball works, and looks awesome when activated.  However; one minor "bug" I can't figure out and I have a sneaking suspicion it lies somewhere in the dip switches, when you hit the extra ball feature, the shoot again light will not activate as supposed to.  I reached out to the original creator of this table, hmueck, and he confirmed the light does in fact work, but thats as far as we got.  I searched for a dip switch guide but came up empty handed.  So maybe someone can figure out this mystery. As I stated above, big thanks to the original creator  hmueck who gave me the permission to edit and release this table.  Also, from reading through the old thread it looks like arngrim provided a dof script of some kind.   Also used Jp's environment and lighting from his Nitro Ground Shaker table   Read More

Wheel image for Solar City (Gottlieb 1977)

Wheel for Loserman's Super Soccer table

This is now the Maximum amount of cool that you can get from a Tron Legacy PuP-Pack! The MAX PACK! A video preview of all the VPX Tron Legacy PuP-Packs can be seen here: https://www.youtube.com/watch?v=vfgPrgyTH1s&t   The Max Pack: PuP Backglass, PuP Topper, and real DMD or virtual DMD on their own screens. This is by far the best looking Tron Legacy PuP-Pack of all the versions I have created. This version is for anyone who has a real DMD or an LCD DMD screen. Or a "square" screen that has enough space for a Backglass and DMD. (Topper is optional). This has a brand new "framed" backglass with animated lens flares and colour changing neon effects to match the neon ramps and the gamemodes of the table. It also has other animations and new Topper videos. It makes the older PuP-Pack look very boring and simple by comparison. I have included 2 versions of the Max Pack: "Topper" version for those who have a Topper screen / space that is 21:9 "Under" version for those who have an "Under" screen / space that is wider than 21:9. This PuP-Pack uses: 2 PuP Backglass video layers, 2 PuP Topper video layers.   Requirements: IMPORTANT! PinUP System FULLY installed and PinUP Player setup (which contains PinUP Player 1.3+, PuPB2S driver, and PuPCapture files). DMDExt / Freezy 1.7 or higher installed in VPinMAME folder and configured to enable PUP! This must be installed AFTER PinUP System is installed! (to ensure you have the 1.7 or higher files!) "Use External DLL" must be enabled in PinMAME settings for trn_174h PuPCapture MUST be working: This PuP-Pack relies on monitoring the pinmame DMD for specific images to trigger videos. This needs both the freezy 1.7+ "dmddevice.dll" file, and the Pinup Player "dmddevicePUP.dll" file. Ensure PuPCapture is enabled in the dmddevice.ini file (in your VPinMAME folder): [pinup] enabled=true Note: If you are using a real DMD, then ensure that the freezy virtual DMD is disabled in the dmddevice.ini file: ; a DMD that renders with nice dots on a computer monitor [virtualdmd] enabled = false   You CANNOT use any older version of PinUP Player as it won't work correctly! Must be 1.3 or higher!   Older PuP-modded Tron Legacy Tables: You CANNOT use ANY PuP modded tables with this PuP-Pack! DO NOT use the "Tron Legacy PuP-Edition" or the "Tron Legacy PuP-Pack Edition" tables (or any table based on those!)   You can however use this with any normal version of Tron Legacy LE VPX.   No directb2s Backglass Running: You MUST NOT have a directb2s running at all, or it will obscure the PuP Backglass!!! Simply make sure you have a copy of your favorite Tron table (intended only for use with this PuP-Pack), and make sure it is named VERY differently to your directb2s file, so when you launch that copy of your Tron Legacy table it won't launch the directb2s!   DMDs can now be ANY colour (or DMD colour mod) you want! This is a NEW feature with Freezy 1.7+ files installed! There is no longer a requirement to have your DMD colours match the PuPCapture files!   Your DMD must be in English for all PuPCapture video triggers to work correctly!   System:  Visual Pinball X (version 10.5+) PuP-Pack: All Video, Media and Artwork by TerryRed. PuP-Pack Editor & PuPCapture files by TerryRed   Installation: Ensure there are no files in your "PUPVideos   trn_174h" folder (if that folder already exists). Copy the PuP-Pack "trn_174h" folder from the archive into your PUPVideos folder.   Topper (Optional): If you do not have a Topper screen / space, you do not need to use the PuP Topper if you don't want to. You can disable the Topper just for this PuP-Pack by using the PinUPPackEditor. Disable the Topper Screen 1 (screen 0) and Topper Screen 2 (screen 8) and save the PuP-Pack.   For problems getting a PuP-Pack to work, refer to the wiki: http://www.nailbuster.com/wikipinup/doku.php?id=puppack_troubleshoot   Read More

The 3 on 1 Tron Legacy PuP-Pack! A video preview of all the VPX Tron Legacy PuP-Packs can be seen here: https://www.youtube.com/watch?v=vfgPrgyTH1s&t   The 3 on 1 Pack: PuP Backglass, PuP Topper, DMD (PinMAME or DMDExt) are all on the Backglass screen. For those who MUST have their virtual DMD on the backglass screen (16:9) and don't have room for anything else. If you have a "square" backglass screen, then you can try the other two packs ("Max Pack" or "2 on 1") and have the DMD below the PuP Backglass. This Pack uses still image overlays for the new "framed" neon border. This overlay will change neon colours for game modes as well, but only has single colour transparency, and can't have animated neon or flares, or other animation on the border, so it's not as nice looking as the "Max Pack". You need to position your virtual DMD at the bottom center of the PuP Backglass. This PuP-Pack uses: (1 Backglass video layer, 2 Topper video layers, virtual DMD Layer, 1 Overlay layer)   Requirements: IMPORTANT! PinUP System FULLY installed and PinUP Player setup (which contains PinUP Player 1.3+, PuPB2S driver, and PuPCapture files). You also MUST be updated to PinUP System 1.3.4 or higher! http://www.nailbuster.com/wikipinup/doku.php?id=release_notes DMDExt / Freezy 1.7 or higher installed in VPinMAME folder and configured to enable PUP! This must be installed AFTER PinUP System is installed! (to ensure you have the 1.7 or higher files!) "Use External DLL" must be enabled in PinMAME settings for trn_174h PuPCapture MUST be working: This PuP-Pack relies on monitoring the pinmame DMD for specific images to trigger videos. This needs both the freezy 1.7+ "dmddevice.dll" file, and the Pinup Player "dmddevicePUP.dll" file. Ensure PuPCapture is enabled in the dmddevice.ini file (in your VPinMAME folder): [pinup] enabled=true Note: If you are using a real DMD, then ensure that the freezy virtual DMD is disabled in the dmddevice.ini file: ; a DMD that renders with nice dots on a computer monitor [virtualdmd] enabled = false   You CANNOT use any older version of PinUP Player as it won't work correctly! Must be 1.3 or higher!   Older PuP-modded Tron Legacy Tables: You CANNOT use ANY PuP modded tables with this PuP-Pack! DO NOT use the "Tron Legacy PuP-Edition" or the "Tron Legacy PuP-Pack Edition" tables (or any table based on those!)   You can however use this with any normal version of Tron Legacy LE VPX.   No directb2s Backglass Running: You MUST NOT have a directb2s running at all, or it will obscure the PuP Backglass!!! Simply make sure you have a copy of your favorite Tron table (intended only for use with this PuP-Pack), and make sure it is named VERY differently to your directb2s file, so when you launch that copy of your Tron Legacy table it won't launch the directb2s!   DMDs can now be ANY colour (or DMD colour mod) you want! This is a NEW feature with Freezy 1.7+ files installed! There is no longer a requirement to have your DMD colours match the PuPCapture files!   Your DMD must be in English for all PuPCapture video triggers to work correctly!   System:  Visual Pinball X (version 10.5+) PuP-Pack: All Video, Media and Artwork by TerryRed. PuP-Pack Editor & PuPCapture files by TerryRed   Installation: Ensure there are no files in your "PUPVideos   trn_174h" folder (if that folder already exists). Copy the PuP-Pack "trn_174h" folder from the archive into your PUPVideos folder.   For problems getting a PuP-Pack to work, refer to the wiki: http://www.nailbuster.com/wikipinup/doku.php?id=puppack_troubleshoot   Read More

The 2 on 1 Tron Legacy PuP-Pack! A video preview of all the VPX Tron Legacy PuP-Packs can be seen here: https://www.youtube.com/watch?v=vfgPrgyTH1s&t   The 2 on 1 Pack: PuP Backglass, PuP Topper, both on one screen. Real DMD or LCD DMD on a separate screen (unless you have a square screen that gives you space for it below the PuP Backglass) For those who want the Topper on the backglass screen (16:9) and don't have room for anything else. This Pack uses still image overlays for the new "framed" neon border. This overlay will change neon colours for game modes as well, but only has single colour transparency, and can't have animated neon or flares, or other animation on the border, so it's not as nice looking as the "Max Pack". This PuP-Pack uses: 1 Backglass video layer, 2 Topper video layers, 1 Overlay layer.   Requirements: IMPORTANT! PinUP System FULLY installed and PinUP Player setup (which contains PinUP Player 1.3+, PuPB2S driver, and PuPCapture files). You also MUST be updated to PinUP System 1.3.4 or higher! http://www.nailbuster.com/wikipinup/doku.php?id=release_notes DMDExt / Freezy 1.7 or higher installed in VPinMAME folder and configured to enable PUP! This must be installed AFTER PinUP System is installed! (to ensure you have the 1.7 or higher files!) "Use External DLL" must be enabled in PinMAME settings for trn_174h PuPCapture MUST be working: This PuP-Pack relies on monitoring the pinmame DMD for specific images to trigger videos. This needs both the freezy 1.7+ "dmddevice.dll" file, and the Pinup Player "dmddevicePUP.dll" file. Ensure PuPCapture is enabled in the dmddevice.ini file (in your VPinMAME folder): [pinup] enabled=true Note: If you are using a real DMD, then ensure that the freezy virtual DMD is disabled in the dmddevice.ini file: ; a DMD that renders with nice dots on a computer monitor [virtualdmd] enabled = false   You CANNOT use any older version of PinUP Player as it won't work correctly! Must be 1.3 or higher!   Older PuP-modded Tron Legacy Tables: You CANNOT use ANY PuP modded tables with this PuP-Pack! DO NOT use the "Tron Legacy PuP-Edition" or the "Tron Legacy PuP-Pack Edition" tables (or any table based on those!)   You can however use this with any normal version of Tron Legacy LE VPX.   No directb2s Backglass Running: You MUST NOT have a directb2s running at all, or it will obscure the PuP Backglass!!! Simply make sure you have a copy of your favorite Tron table (intended only for use with this PuP-Pack), and make sure it is named VERY differently to your directb2s file, so when you launch that copy of your Tron Legacy table it won't launch the directb2s!   DMDs can now be ANY colour (or DMD colour mod) you want! This is a NEW feature with Freezy 1.7+ files installed! There is no longer a requirement to have your DMD colours match the PuPCapture files!   Your DMD must be in English for all PuPCapture video triggers to work correctly!   System:  Visual Pinball X (version 10.5+) PuP-Pack: All Video, Media and Artwork by TerryRed. PuP-Pack Editor & PuPCapture files by TerryRed   Installation: Ensure there are no files in your "PUPVideos   trn_174h" folder (if that folder already exists). Copy the PuP-Pack "trn_174h" folder from the archive into your PUPVideos folder.   For problems getting a PuP-Pack to work, refer to the wiki: http://www.nailbuster.com/wikipinup/doku.php?id=puppack_troubleshoot   Read More

This is a mod to hmueck's excellent NBA Fastbreak VPX table.  This mod is designed to greatly improve the functionality of the game. NOTE: Fast flips currently do not work with this game as they will cause issues with some of the features you will encounter later in the game.   -Fully functional shot clock (thanks to DJRobX) -Improvements to "In the Paint" mode: smoother passes, fixed shot 3, working magnet -Backglass game has been moved to the backglass for desktop users. Cabinet users can continue to use the animated backglass. -Fixed ball launch issue where ball(s) don't always reach the table -Various small graphical touch ups.   Thanks to everyone who contributed to this table over the years. Special thanks to hmueck for the excellent VPX table and permission to mod. Extra special thanks to DJRobX for assisting with the shot clock implementation.   Read More

The Grid's most awesome addressable leds and HD PinUP Player videos make for Light Cycle ramp effects, Light Jet Cannons, Explosions and the coolest de-resolution effects you have ever seen in a real pinball cabinet! Now updated to support the newest PuP-Pack with new videos and SSF (surround sound feedback). A Future Pinball first! All Video, Media, Artwork, and PuP-Pack files by TerryRed Video preview: https://www.youtube.com/watch?v=sguD2L3w0og   =============================== Requirements: Tron Legacy (Stern Ultimate) FP PuP-Pack (BG, Topper, SSF). This is the only PuP-Pack that will work with this table! https://vpinball.com/?post_type=cmdm_page&p=93462   B2S Server 1.3.0.2 or higher installed (required for DOF). If you don't have VPX or B2s Server at all, I'd recommend installing the VPX All in One Installer to setup VPX, B2S Server, etc easily (even if you don't want VPX). Install to default locations. Just make sure when it asks if you are using a 2nd screen for Backglass, you say YES! That is needed to install and enable B2S Server, even if you are not a cabinet user. Then download and update to B2S Server 1.3.0.2 afterward. https://vpinball.com/VPBdownloads/vpx-installer-10-4-0/ B2s Server 1.3.0.2: https://www.vpforums.org/index.php?app=downloads&showfile=12553   DOF R3++(required for DOFLinx). Use mjr's easy to use Installer: http://mjrnet.org/pinscape/dll-updates.html   DOFLinx 6.31 or higher (to trigger PinUp Player videos and SSF). Must be setup for your system: https://www.vpforums.org/index.php?app=downloads&showfile=12318  Make sure you have copied the newest DOFLinx.vbs file into your Future Pinball - Scripts folder!   PinUP System installed and updated to 1.3.4 or greater.  Required for PuP-Pack.  (Pinup Popper front end gets installed but is NOT required) PinUP Player needs to be setup for your system. https://vpinball.com/VPBdownloads/pinup-system-player-and-popper-front-end-install/ PinUp System updates: http://www.nailbuster.com/wikipinup/doku.php?id=release_notes   ======================= Installation: Copy: Tron Legacy (Stern) (Ultimate 1.01) (p2.7) (DOFLinx MX PuP SSF).fpt  (table file) Tron Legacy (Stern) (Ultimate 1.01) (p2.7) (DOFLinx MX PuP SSF).xml" (physics file for BAM) into your "Future Pinball - Tables" folder. ======================= Desktop Users: Desktop users can use this table with the PuP-Pack as long as: -they have setup all the required software noted above -positioned the PuP Backglass and Topper screens in a good location -are using Future Pinball in windowed mode -or have setup a Forced Borderless Windowed Mode (not supported natively by FP) using a program like "Windowed Borderless Gaming". This is required because Future Pinball's FULLSCREEN mode will stay on top and cover up the PuP Video Windows.   How to force Future Pinball to use a Borderless Windowed Mode to allow use of PuP-Packs (Required for Desktop users ONLY!) Setup Future Pinball in a windowed mode. Then use the registry (regedit) to change your windowed mode's width and height to the exact resolution you want: Computer HKEY_CURRENT_USER Software Future Pinball GamePlayer Do not use the FP Editor to change video settings after this, or your FP windowed resolution may get reset again. Now download and install Windowed Borderless Gaming. (Google it if you need to) http://westechsolutions.net/sites/WindowedBorderlessGaming/ Configure that program to work with Future Pinball. Once setup, you simply let this program run in the background. When Future Pinball is detected and brought into focus, it will have its window forced into a Borderless Window, allowing the PuP Video Windows to display over top of the Future Pinball window. ==================== How to Use with Desktop: Once you have everything installed and setup... DOFLinx should be running in the background first (as Admin)! Then load Future Pinball, then load your table and start right away as DOFLinx will try to connect with FP as soon as its detected. DOFLinx will timeout after a certain amount of time (configured in DOFLinx.ini) if the table isn't completely loaded, started, and the FP Link isn't established yet. After the table completely loads and starts, the table will look like it is isn't working because its not lit up. This is normal for this specific table. Wait at least a good 15 seconds at this point to be sure DOFLinx has made the connection to FP (Important for the PuP-Pack). Then when you press the START button, the table should come alive and then you should be seeing the PuP-Pack video windows for Backglass and Topper (if enabled) come on. Now you are ready to play! When you exit the game, exit FP completely so DOFLinx will close the Link to FP and also close the PuP-Pack.   How to Use with a Cabinet: Once you have everything installed and setup... DOFLinx should always be running in the background (as Admin)! Launch the table using your front end (like Popper or PBX). DOFLinx will will detect FP, and try to establish a link with it.  DOFLinx will timeout after a certain amount of time (configured in DOFLinx.ini) if the table isn't completely loaded, started, and the FP Link isn't established yet. After the table completely loads and starts, the table will look like it is isn't working because its not lit up. This is normal for this specific table. Wait at least a good 15 seconds at this point to be sure DOFLinx has made the connection to FP. Then when you press the START button, the table should come alive and then you should be seeing the PuP-Pack video windows for Backglass and Topper (if enabled) come on. Now you are ready to play! When you exit the game back to your front end, DOFLinx with detect FP has closed and will close the Link to FP and also close the PuP-Pack.   ========================================   This table has complete DOFLinx cabinet feedback and lighting support for the following: – 10 solenoids for flipper, slingshots, bumpers, etc.. – 5 RGB flashers – Blower Fan – Shaker – Gear motor – Strobe – Beacon – Start button – Coin button – Launch Ball button – RGB Undercab Lighting – Addressable Leds   Read More

All-in-one (almost) installer (VPX10.5.0, VP9.9.5, VP9.9PM5(updated Plunger/Accel/Surround MOD), VP9.2.1, VP8, VPM3.1, DMDext, X/UltraDMD, B2S, DX9webinstaller, Core.vbs scripts). Open the zip, run the .exe, enjoy.    Read More

Standalone EXE, all needed DLLs, changelog, command reference and registry keys for Visual Pinball X 10.5

This newly updated Aliens FX3 PuP-Pack has more videos, has been updated to use newer PuP features, and has optional SSF (Surround Sound Feedback) and Movie Music!   All Video, Media and Artwork, PuP-Pack Editor & PuPCapture files by TerryRed Video preview: https://www.youtube.com/watch?v=A1tNlyc9qY4&t   Requirements: DMDExt 1.7 or higher installed (32 bit ONLY, NOT 64 bit!!!) and PuP settings enabled https://vpinball.com/forums/topic/freezy-dmdext-1-7-a-universal-dll-for-real-dmd-virtual-dmd-and-pinup-system/ Pinball FX3 / 2:  Needs to have in-game cabinet support enabled. DMD relocation enabled and the FX3 DMD (set at 1040x272) positioned off screen and working with DMDext. PinUP System 1.3.4 or greater installed and PinUP Player setup. https://vpinball.com/VPBdownloads/pinup-system-player-and-popper-front-end-install/ http://www.nailbuster.com/wikipinup/doku.php?id=release_notes DOF R3++(For DOFLinx): http://mjrnet.org/pinscape/dll-updates.html DOFLinx 6.31 or higher (for PuP SSF): https://www.vpforums.org/index.php?app=downloads&showfile=12318   DMD Colors:  Default (Yellow, for Single Player), Red DMD (P1 in Hot Seat) won't work with the PupCapture files in this PuP-Pack. It's important that you set your DMD colours to match the default in order to ensure proper PuPCapture operation.   DO NOT USE FX3 directb2s with DOFLinx! Make sure you don't have an Aliens directb2s in your FX3_B2S folder, or it will cover up the PuP-Pack backglass.   Topper screen not Required: I have included 2 versions of the PuP-Pack. One for those with a Topper screen, and another for those with an Under screen. You DO NOT require one of those screens to use this PuP-Pack. You can simply disable the Topper screen of this PuP-Pack using the PuPack Editor.   Installation: Extract the PuP-Pack archive of your choice to a temporary folder. Ensure there are no files in your "PUPVideos - Aliens" folder (if that folder already exists). Copy the PuP-Pack (Aliens) folder into your PUPVideos folder. Note: SSF and Movie Music is disabled by default. If you wish to use SSF (Surround Sound Feedback), you will need to turn the "physics" sound level to OFF in the FX3 settings menu. (This will affect ALL FX3 tables) If you want to use the Movie Music, then you need to turn the "Music" sound level to OFF in the FX3 settings menu. (This will affect ALL FX3 tables) To enable either SSF , Movie Music, or both...you need to extract the appropriate zip file to your "PUPVideos - Aliens" folder overwriting all files.   Music for this PuP-Pack was used from SLAMT1LT's excellent Aliens Legacy table on Future Pinball.     Read More

Yet another fresh beta build ;)

This newly updated Tron Legacy (Stern Ultimate) Future Pinball PuP-Pack has new videos with animated neon frames and titles. It has also been updated to use newer PuP features, and has SSF (Surround Sound Feedback)! A Future Pinball first! All Video, Media, Artwork, and PuP-Pack files by TerryRed Video preview: https://www.youtube.com/watch?v=sguD2L3w0og   =============================== Requirements: Tron Legacy (Stern Ultimate) DOFLinx: MX PuP SSF 1.2 Future Pinball table. This is the only table that will work with this PuP-Pack! https://vpinball.com/?post_type=cmdm_page&p=93453   PinUP System installed and updated to 1.3.4 or greater.  (Pinup Popper front end gets installed but is NOT required) PinUP Player needs to be setup for your system. https://vpinball.com/VPBdownloads/pinup-system-player-and-popper-front-end-install/ PinUp System updates: http://www.nailbuster.com/wikipinup/doku.php?id=release_notes   B2S Server 1.3.0.2 or higher installed (required for DOF). If you don't have VPX or B2s Server at all, I'd recommend installing the VPX All in One Installer to setup VPX, B2S Server, etc easily (even if you don't want VPX). Install to default locations. Just make sure when it asks if you are using a 2nd screen for Backglass, you say YES! That is needed to install and enable B2S Server, even if you are not a cabinet user. Then download and update to B2S Server 1.3.0.2 afterward. https://vpinball.com/VPBdownloads/vpx-installer-10-4-0/ B2s Server 1.3.0.2: https://www.vpforums.org/index.php?app=downloads&showfile=12553   DOF R3++(required for DOFLinx). Use mjr's easy to use Installer: http://mjrnet.org/pinscape/dll-updates.html   DOFLinx 6.31 or higher (to trigger PinUp Player videos and SSF). Must be setup for your system: https://www.vpforums.org/index.php?app=downloads&showfile=12318  Make sure you have copied the newest DOFLinx.vbs file into your Future Pinball - Scripts folder!   Topper screen NOT Required: I have included 2 versions of the PuP-Pack. One for those with a Topper screen, and another for those with an Under screen. You DO NOT require one of those screens to use this PuP-Pack. You can simply disable the Topper screen of this PuP-Pack using the PuPack Editor. If you don't have a Topper or Under screen space in your cabinet, then it is REQUIRED to turn off the Topper of this PuP-Pack using the PuPack Editor! SSF Optional: If you don't want to use the PuP SSF sounds at all, you can simply turn off the SSF Screen (Screen 4) using the PuPack Editor. ======================= Installation: Extract the PuP-Pack archive of your choice to a temporary folder. Ensure there are no files in your "PUPVideos - FP_TRONLEG_STERN_ULT" folder (if that folder already exists. We don't want any old or improper files in there getting mixed up). Copy the PuP-Pack (FP_TRONLEG_STERN_ULT) folder into your PUPVideos folder. ======================= Desktop Users: Desktop users can use this table with the PuP-Pack as long as: -they have setup all the required software noted above -positioned the PuP Backglass and Topper screens in a good location -are using Future Pinball in either windowed mode -or have setup a Forced Borderless Windowed Mode (not supported natively by FP) using a program like "Windowed Borderless Gaming". This is required because Future Pinball's FULLSCREEN mode will stay on top and cover up the PuP Video Windows.   How to force Future Pinball to use a Borderless Windowed Mode to allow use of PuP-Packs (Required for Desktop users ONLY!) Setup Future Pinball in a windowed mode. Then use the registry (regedit) to change your windowed mode's width and height to the exact resolution you want: Computer HKEY_CURRENT_USER Software Future Pinball GamePlayer Do not use the FP Editor to change video settings after this, or your FP windowed resolution may get reset again. Now download and install Windowed Borderless Gaming. (Google it if you need to) http://westechsolutions.net/sites/WindowedBorderlessGaming/ Configure that program to work with Future Pinball. Once setup, you simply let this program run in the background. When Future Pinball is detected and brought into focus, it will have its window forced into a Borderless Window, allowing the PuP Video Windows to display over top of the Future Pinball window. ==================== How to Use with Desktop: Once you have everything installed and setup... DOFLinx should be running in the background first (as Admin)! Then load Future Pinball, then load your table and start right away as DOFLinx will try to connect with FP as soon as its detected. DOFLinx will timeout after a certain amount of time (configured in DOFLinx.ini) if the table isn't completely loaded, started, and the FP Link isn't established yet. After the table completely loads and starts, the table will look like it is isn't working because its not lit up. This is normal for this specific table. Wait at least a good 15 seconds at this point to be sure DOFLinx has made the connection to FP (Important for the PuP-Pack). Then when you press the START button, the table should come alive and then you should be seeing the PuP-Pack video windows for Backglass and Topper (if enabled) come on. Now you are ready to play! When you exit the game, exit FP completely so DOFLinx will close the Link to FP and also close the PuP-Pack.   How to Use with a Cabinet: Once you have everything installed and setup... DOFLinx should always be running in the background (as Admin)! Launch the table using your front end (like Popper or PBX). DOFLinx will will detect FP, and try to establish a link with it.  DOFLinx will timeout after a certain amount of time (configured in DOFLinx.ini) if the table isn't completely loaded, started, and the FP Link isn't established yet. After the table completely loads and starts, the table will look like it is isn't working because its not lit up. This is normal for this specific table. Wait at least a good 15 seconds at this point to be sure DOFLinx has made the connection to FP. Then when you press the START button, the table should come alive and then you should be seeing the PuP-Pack video windows for Backglass and Topper (if enabled) come on. Now you are ready to play! When you exit the game back to your front end, DOFLinx with detect FP has closed and will close the Link to FP and also close the PuP-Pack.   Read More

Big thanks to DJRobX for making the fast flips work on this table with some incredible script vodoo. So this is basicly a DJRobX fast flip mod. This is all beyond my knowledge. I couldn't even find the lines he was changing! When i asked Sindbad for permission to use his Vector resources he told me that he was already working on a version of this table. Both versions were in their final stage so i thought that this was it and this baby will stay on my cab. But he didn't hesitate and almost completely gave up his own table to team up with me. Thanks man! You don't find guys like him very often! He was also a motivation at the end when i lost my patience. I was ready to release the table as is but he had a couple of good ideas and he made them possible with his Photoshop and scripting knowledge! So this also Sindbad's table. OK,turn down the lights in your mancave and we hope you enjoy this one! Credits: v1.1 WED21: - Killer sound files and script   v1.0 Sindbad: - Redraws, graphics, images. Especially the PF redraw is awesome! - Scripting - Photoshoping whenever i needed it! - Thanks for giving up your own table just to finish this one! Schreibi34: - Ramps and other primitives all over the table - Renderings all over the table - Lighting - Gameplay - Layout changes - Insert lights randr: - Kicker primitives including the two way kicker on the UPF Arngrim: - Thanks for checking the DOF stuff! TheLoafer: - Thanks for checking the gameplay. He owned the real table. I guess he's still playing. If he finds something that makes gameplay more realistic, we will add this in an update! jpsalas: - JP's fading lamps and flashers script - JP's ballrolling sound script ninuzzu: - Ballshadow     Read More

Here is my first offical release. This table took really long to create so i hope you will enjoy it. Thanks to mfuegemann, freneticamnesic, toxie and the vpdevs. Also thanks to clark kent and gigagula who tested the hell out of the table . The redraw of the playfield and the plastics are done by kiwi. Bumpercaps are from mjr. Flashercaps are from zany. Currently i use the soundfiles i have recorded from Dirty Harry, i hope i can update them in the future. If you play my table the first time don´t forget to delete the old nvram file to prevent errors.   Read More

Ups, I did it again... modded myself First of all this is an experiment, a mod of my Andromeda (Game Plan 1985) to have counters matching to the originals. What i did: Found an image of digital counters and used to realize custom LED counters for B2S Designer. Made all the 11 images trying to keep font and light effect, and most of all background not 100% black. Imported in B2S designer and used instead of Rendered LED counters. Rendered leds are wonderful, i love them, but they should be perfect with transparent background and customizable font. If i only was able to make this change...   Andromeda (Game Plan 1985) backglass 1.0.0 I found a sharp high resolution image of Andromeda backglass, but only for it's central part. The tentation was too strong and so i decided a restoration of all the backglass, starting from the good one made from Wildman (thank you for ALL your great works).   Long work on the rest of the background for color matching, and reconstruction of parts too dark. Made from zero the red logo, changed reel's colorand fonts for best matching to the original. But you'll see with your eyes.. hope you will enjoy.   Added weel logo too.     Read More

This is a backglass for Conan (Rowamet 1983) Pinball i made loong time ago, without to much work (as you can see) but I didn't find a good image for backglass. Used a movie poster with the same main image and redraw from scratch snakes (yes they are ugly). For title and Conan image on the right side simply used images the more near possible to the original, with some adjustement. To be more similar to real table i made counters with 6 digit, so you will need to change ROM name in table script, from rollstob to rollston (the table is a mod or Rolling Stones Bally 1980). For inner lights... used immagination and a short video on youtube. Not my best, but it seems to work. Arnold deserves better than this so if i'll find better resources...   Read More

This is a Table i've moded a view years ago. It's a mod of Lizard's Sexy Girl, so he did all the work, i've just fooled around with the graphics. I changed the Physics to make the game faster, it's not perfect but you can change it if you don't like it. And very important: This is not a Table vor children (or maybe wifes or girlfiends). So Keep it in save hands, we sure don't want to get any trouble. The MP3 Player i use in my Version is still inside the sript, if you like put your favorit musik in Visual Pinball/Music and change the sript. Enjoy   Read More

Per request. :) An alternate wheel image for Beach Bums. Text only. Surf's up!

Metallica Premium Monsters (Stern 2013) mod of many other mods and Fast Flips enabled like the title says this is a mod of many other mods.... so I have no clue what the order of modding is.... I was just just going to post a another google drive link.... but i'm asked often to where it is.... so this is just easier.... but it was all started from Frens original posted Metallica Pro table... that was a port of 85vett's VP9.... then Sliderpoint came and got it to Premium Monsters..... then mod after mod after mod..... so guess what this is just one more.... reworked PF and Plastic by Peter Docker and tweaks by me I did my best to get the lighting as nice as possible getting the ramps to look good enough Fast Fips as enabled after help from DJrob X this has been being modded over and over for so long there is no way to thank everyone other then say Thanks Everyone that at chipped in....   Read More

Big Thank you to Javier for his VP9 version,  I started to use his resources but I noticed that he used the FP resources Francisco666 and the other FP authors for their plastic and PF redraw Dark bumper cap and apron primitive Bord for his plastic ramp textures, it cut my job to about 5 minutes when I added the ramp decals   Read More