VPINBALL Downloads (1774)

Lost World (Bally 1978) b2s - close to authentic lighting credits: Starmans Image that was modified Wildmans rom ID's (I was to lazy to get them myself)   Read More

Lord of the Rings backglass from scratch created from a hi-res picture taken from the LOTR table from a friend. The lightning is done with snippets. The backglass is for 3 screen setups, no grill. Hope you like it :).   Read More

4K refresh of Sliderpoint's fantastic Metallica Premium table. The following modifications were made: Minor updates to table lighting where certain parts of the playfield appeared a bit washed out on my cabinet.  Reduced light intensity around the center playfield "Metallica" image, and swapped out the Environment Emission Image, which helped with some fading in the playfield decals and lights around the graveyard. Replaced the steel apron with a custom black powder-coated apron.  Also updated all the apron cards with high-resolution versions. Reworked the entire playfield, replacing original images with higher resolution images.  I didn't have access to an actual Metallica table, and there were no good sources for ultra-high resolution table images for Metallica, so I ended up using photoshop to piece the playfiled together from various images and videos I found on the Internet which happened to catch one part of the playfield or another up close.  Most profound changes are visible in the lower-half of the playfield. Reworked the coffin.  The original has a slight gap in the glass over the coffin on the right side and and the cutout around the coffin had somewhat jagged edges due to being cut at 1080p. Moved the glass to the left, and re-cut the cutout at 4K.  Also, the effect of the frosted glass covering the coffin is actually an effect of the texture on the ramp beneath the playfield.  As a result, when balls are locked and roll into the coffin, it breaks the illusion that the glass is on top.  Made some tweaks so that the balls now appear to be beneath the frosted glass when they roll into the coffin. Replaced nearly all of the table light images with higher resolution images.  Made tweaks to others to sharpen them up or increase contrast.  Note that the official premium table has white spider lights.  I used red spider lights like those on the original pro table, as I preferred the extra color it adds to the table.     Read More

Black Sheep Squadron (Astro 1979) wheel

Flash Gordon (Bally 1981) wheel

Wheel image for JP's Lost World posted at VPF.  I posted this there too, but I'm not sure how long it will take to be approved there.   Read More

Because there were not enough versions already I went ahead and did a fairly quick build of  Gottlieb's 1980 Amazing Spider-man.  There were a couple things that prompted me to do so, firstly the others were all built as a standard width whereas Amazing Spider-man is a wide-body (and despite my rants to the contrary I used the dimensions in the so called dimensions manager instead of doing math, I am on vacation). Secondly the other versions were also made with 7 digit displays and use the 7-digit rom, Spider-man was origianlly a 6-digit display so I went back to the stock version. And I wanted to put the desktop score displays on the backdrop instead of having the dmd display. Most of the image resources for this are from gtxjoe's version of the table, thanks for the blanket permission to mod. The desktop score lights I originally borrowed from a 32assassin table and at some point re-drew all the lights so the individual leds better matched the Gottlieb displays, not sure which of my tables has the redrawn ones Nobs for sure and this one. The included direcdtb2s is a quick mod of wildman's 7- digit version to 6 digit with color change. I'm doing this primarily on my laptop so there may be some oddities, and I have not gone through the physics with a fine tooth comb but it plays reasonably wells. No idea if DOF is setup in the script or not, will make sure it works when I'm back at the cab and will include in final release.   Read More

"Pathetic Earthlings... Who can save you now?" Download includes VPX table, directB2S Backglass, rom, and media. Credits: Cyberprez: plastics, spinner, and two way kicker primitives WRD1972: physics and other tweaks Sinbad: PM5 version used as the base for this rebuild Scapino: For all previous work on this table Flupper: Lighting techniques borrowed from Diner Wildman: original directb2s backglass that I modded VPX Devs: for the great work developing this awesome platform Flash Gordon started as a 1930's comic strip hero and was a very successful Hollywood motion picture serial in 1936, prompting two more serials in 1938 and 1940. A movie in 1980 coincided with the production of this game. First split-level game from Bally. First game to use the "Squawk & Talk" board, and the second production Bally game with speech. (Bally's 1979 'Kiss' prototype was the first, but the production game did not contain speech. Bally's 1980 'Xenon' was the first production Bally game with speech.) Per Claude Fernandez and Kevin O'Connor at Chicago Expo 2014, customers complained about the strobe light in the upper backbox so it was removed during production. The small clear window through which the strobe had flashed was covered over. Some games were equipped in the backbox with a "Vocalizer" Module (AS-2518-57) and a "Sounds Plus" Module (AS-2518-56). Reportedly, these were Early Production games and that, during production, these modules were replaced by a single "Squawk & Talk" Module (AS-2518-61). If you have the correct manual for your game, the diagram on page 10 will agree with the module(s) in your backbox.   Read More

Black Sheep Squadron (Astro 1979) b2s this is made up of redraws and vectorized images....

Here is the Moonwalking dead i did some time back.  Works for the Pro version of the Walking Dead Table, the LE of Moonwalking dead table will have unknown results with this Rom.  I will try to get an LE version done soon.   Read More

Medusa (Bally 1981) b2s - authentic lighting

Heavy Metal Meltdown (Bally 1987) b2s found a pretty nice image color corrected it... here it is

Tales from the Crypt (Data East 1993) topper i'm not a topper guy but I made one anyway.... https://www.youtube.com/watch?v=2z01wTDeWk0    Read More

IMO in the top 3 of classic Stern tables. I received a playfield scan from a generous Pinsider. The plastics are garbage, so sorry about that. If someone has access to better ones or wants to do a redraw I'd be very happy. @randr helped me with the spinner and rubber brackets late last year. Thanks, randr! B2S here. This wraps up my trilogy of classic Stern tables. Dracula and Flight 2000 are also found at this site.   Read More

matching wheel for my B2S https://vpinball.com/VPBdownloads/tales-from-the-crypt-data-east-1993-alternative/

Dolly Parton (Bally 1978) wheel

Tales from the Crypt (Data East 1993) alternative

Nine Ball (Stern 1980) wheel perfect for bord table!!

Company logo for Alvin G. and Co.    Thanks to the onevox at VPU for the cleaned up version he posted.   Read More

You Have the POWER!!!  with my MASTERED Edition update to "Rom's" excellent "Masters of the Universe" Future Pinball table. I've also created an "all-new" DOFLinx cabinet mod as well. This table mod is inspired by SLAMT1LT's tables as well as the newer pinball machines (from JJP, Stern, Heighway Pinball) that now use monitors instead of DMDs.   A video demonstration that shows off all the features of the MASTERED Edition as well as the DOFLinx mod can be seen here:   https://youtu.be/O_5w4ocVInI     MASTERED Edition: - new backglass with various fanart. Formatted specifically to work with 16:9, and 4:3 screens. - new full motion video sequences for almost all table actions and modes. These are NEW hi-resolution video clips that now appear on the backglass (and display HUD for desktop users) - new info display shown on backglass - new sound clips Watch Prince Adam dance to the beat (and the animated matching flashers) of Castle Multi-Ball! Experience the woosh of blower-fan air from Ripper Multi-Ball. FEEL the POWER (and shaker motor) when you become HE-MAN and see your power emanate from the flashers. FEAR Skeletor as he launches his devastating 9-Ball Multi-Ball and watch him laugh at you on the backglass. Go beyond the days of DMDs and see full hi resolution videos and info displays on the new animated backglass. Don't be a cheap skate, or Skeletor will get angry! With 1000's of images, and new sounds...this makes for a MOTU experience like no other, and a Pinball experience found nowhere else!   DOFLinx Cabinet Edition: -10 solenoid feedback for flippers, bumpers, slings, kickers, etc -gear motor for Castle Grayskull, Ripper, and He-Man -shaker motor feedback to feel the power and action -blower fan feedback for Ripper ramp -5 RGB flasher animated effects -RGB under cabinet lighting -beacon and strobe effects -coin, start, and launch button leds   Read More

Ruler primitive for VP with 50 unit box to scale ruler against. The ruler can be positioned like any 3d object to check your flipper sizes, plastic or ramp heights etc. Not sure if this will be useful but i would share it Could add inches ruler as option let me know   Read More

This script provides an easy way to take manual control of a ball using the arrow keys.  Ball control for testing or table demonstrations is an often requested feature.  This simple script should meet most of the needs for those requesting this functionality.  Suggestions or additions to this script are welcome!     Read More

Two and three screen support.

What's New in Version 10.3.0 (See full changelog) for the VP 9.9.X PM5 Plunger/Accel MOD: --------------------------------------- - all PM5 physics (and additional) changes - backport plunger/accel/nudge changes from main VP - minor fixes and backports from main VP - fix UI issue with the layer buttons for high desktop resolutions - disable visual touch/pen feedback to save one frame of input latency/lag - fix timers that dis/enable themselves in the script - fix EMReel crash when image is missing and reel value is nonzero - extend right click behavior for multi-select to hidden items - fixed rendering of overlapping balls - include optional nudge filtering (selectable in the keys dialog) and remove implicit dead zone handling (if you have the dead zone setting at 0% and now experience problems, set it to at least 1%) - native support for the Pinscape Controller - CPU affinity setting     Read More

Ali (Stern 1980) b2s -nice clean image -authentic

1993 Star Trek - The Next Generation by Williams Pinball Concept by: Steve Ritchie Design by: Steve Ritchie, Dwight Sullivan, Greg Freres Art by: Greg Freres Dots/Animation by: Scott Slomiany, Eugene Geer Mechanics by: Carl Biagi Music by: Dan Forden Sound by: Dan Forden Software by: Dwight Sullivan, Matt Coriale recreated for Visual Pinball by Knorr and Clark Kent Instruction Cards are taken from pinballcards.com BumperCaps made by mjr FlasherCaps made by zany Huge thanks to… Ninuzzo who help me with the ball animation in the guns Flupper for his ramp render tutorial Arngrim for helping me with DOF Fuzzel and Toxie for 3D Models and of course there great development work for vp YOU PLAY THIS TABLE THE FIRST TIME —— DELETE NVRAM!!! Some words to the table itself: The subways are rebuild in the editor and all the switches should work flawless. However, it still can happen that balls are wrong sorted. The game rom will correct them by itself. If it happens constantly - delete nvram again. If the error still exists - redownload the table. If it does still happen - report a bug here with a detailed description what happened (was a mode running?, were was the last shoot… and so on…).   Enjoy the table!   Read More

Adventures of Rocky and Bullwinkle and Friends was produced by Data East in 1993.   Data East released 151 different machines in our database under this trade name, starting in 1980.   Other machines made by Data East during the time period Adventures of Rocky and Bullwinkle and Friends was produced include Mad, Jurassic Park, Fighter's History, Arnon Milchan, Night Slashers, Michael Jordan, Hook Pinball, Boogie Wings, Lethal Weapon 3, and Diet Go Go.   A pinball game based upon the cartoon characters of the same name.   Read More

Based in Austin Powers Stern   Script: Javier and 32Assassin Plastics and Playfield: DStruct Models: Francisco666 and Rom Physics: ClarkKent   Use several resources and techniques of some authors more than I know.   I want to thank DevTeam for all the time and dedication they have for the VP scene and all of those who contribute their bit because without them VP today would not be what it is. THANKS!!!   I apologize if I forget to mention someone     The table has to play in VPX_3_beta_rev3069 or bigger.   Read More

Ghostbusters Slimer (JP 2016) wheel a wheel to go with the B2S

well since I'm so far behind I had never grabbed JP's GhostBusters Slimer table.... now that I did I needed a B2S.... the ones I seen were just using the stern GB BG so I thought I would expand on it and add some flair... I found the GB font and some art on the interwebs... and created the logo... anyway heres my version using GInsonic's light animation from his B2S   Read More