• Don't forget to rate 1-5 stars! Check the support tab for any help or comments.

  • Don't forget to "THANK" or "LIKE" the Author's 1st post in support topic.

  • (7)
    « »
  • Download Info

    Thumb
    • Author: Loserman76
    • Version: 1.0
    • Views: 2379
    • File size: 29.22 MB
    • Downloads: 524
    • File Author: Tom, Loserman76, see notes for everyone else involved with the SS version
    • IPDB link:: http://www.ipdb.org/machine.cgi?id=4694
    • Updated: June 20, 2020
    • Categories:
  • Pinball (Stern 1977) - EM Version

     

    http://www.ipdb.org/machine.cgi?id=4694

     

     

    This was  produced by Stern Electronics in 1977 as an EM version and also a SS version.  This is the EM version which plays slightly different from the SS one.

     

    Tom asked me to code up the EM version using the SS release and who am I to turn down working on am EM - lol

     

    These folks I'll quickly acknowledge as they were involved in the SS version which in turn allowed me to do the EM variant:

    Itchigo, @32Assassin, @Bord, @Thalamus, Updon, @posty90, JPSalas, Chris Edler over at pinside

     

    Note: the backglass image is different and I found a really good one on the internet which I chose to use

     

    VPX 10.6 - use betas at your own risk

    initial release

    Currently, there are 0 users and 0 guests visiting this topic.
    Viewing 20 posts - 1 through 20 (of 25 total)
    • Author
      Posts
    • #187413
      Loserman76
      Participant
      @loserman76
      vipMemberContributor

      Pinball (Stern 1977) - EM Version

       

      http://www.ipdb.org/machine.cgi?id=4694

       

       

      This was  produced by Stern Electronics in 1977 as an EM version and also a SS version.  This is the EM version which plays slightly different from the SS one.

       

      Tom asked me to code up the EM version using the SS release and who am I to turn down working on am EM - lol

       

      These folks I'll quickly acknowledge as they were involved in the SS version which in turn allowed me to do the EM variant:

      Itchigo, @32Assassin, @Bord, @Thalamus, Updon, @posty90, JPSalas, Chris Edler over at pinside

       

      Note: the backglass image is different and I found a really good one on the internet which I chose to use

       

      #187420
      bord
      Moderator
      @bord
      MembervipContributorModerator

      This is so cool. Looking forward to seeing how gameplay changes on the EM version.

      #187425
      randr
      Keymaster
      @randr
      ModeratorMember

      very cool @loserman76

      ********************************************************
      Messing with the VPinball app and push notifications.
      So if you haven't downloaded app yet what are you waiting for!?
      for IOS and Android

      ********************************************************

      #187430
      HiRez00
      Participant
      @hirez00
      Member

      Was hoping an EM version would come out someday because I wanted to try the difference between the 2.

      Thank you, sir.

      #187438
      JR
      Participant
      @jfr1
      Member

      I know what I’m doing later tonight!  Thanks L-man!!  Looking forward to checking your updates out.

      #187448
      Tom
      Participant
      @armyaviation
      MemberContributor

      awesome, thanks for doing this for us.  I also cant wait to see the difference.  And for all that dont know, the amount of work that @loserman76 puts into these tables, finding schematics, watching videos, its a real honor to have someone like him around here doing the dirty work for us.  Its too easy to add, “use this rom in the script”, but when you have to script every little thing that happens when that ball rolls around, thats alot of work.  Thanks !!!!!!

      2 users thanked author for this post.
      #187468
      HeyItsJoeBob
      Participant
      @heyitsjoebob

      Really nice table.
      How in the world did you find a backglass for this game???

      Hardest search ever! :-)

      #187488
      STAT
      Participant
      @stefanaustria
      MemberContributor

      Thanks LM and all the Guys :rose:

      #187490
      Rajo Joey
      Participant
      @joey2001
      Member

      Damned. :wacko:

      Now I have to make another wheel for this version. :whistle:

      Thanks for your work. :yahoo: :good:

      #187499
      STAT
      Participant
      @stefanaustria
      MemberContributor

      FYI … i added setlocale(1033) … got the same Error as in the SS Table …

      • This reply was modified 5 months, 1 week ago by STAT.
      #187504
      Adolfo
      Participant
      @scorpion
      Member

      error line 1079 :unsure:

       

       

      #187505
      Adolfo
      Participant
      @scorpion
      Member

      with set locale all ok

      #187528
      STAT
      Participant
      @stefanaustria
      MemberContributor

      No Coin Sound ? … coinin > should be coin , changed in Script.

      • This reply was modified 5 months, 1 week ago by STAT.
      1 user thanked author for this post.
      JR
      #187570
      Loserman76
      Participant
      @loserman76
      vipMemberContributor

      that’s a weird error with the locale(1003) thing. VPX 10.6 right? Must be something left over from the SS code (I shoe-horned my EM logic into the SS code).

      #187572
      clyde
      Participant
      @clyde

      Thanks Loserman for this very nice table. I am getting a( line 1 object required controller) error when I try to load the table. I am playing desktop, single monitor. VPX 10.6 Final

      #187597
      Loserman76
      Participant
      @loserman76
      vipMemberContributor

      probably need to disable B2S in the preferences then.  I’m doing “standard” calls to get B2S running and it should not start if you do not have it configured.

      1 user thanked author for this post.
      #187623
      clyde
      Participant
      @clyde

      probably need to disable B2S in the preferences then. I’m doing “standard” calls to get B2S running and it should not start if you do not have it configured.

      I just double checked & it is disabled. Not sure what is causing it not to load.

      #187783
      Rajo Joey
      Participant
      @joey2001
      Member

      Here are my wheels for this table.
      If you want more wheels made by me (more than 1.300), take a look here:
      https://mega.nz/#F!IFsxBbCD!04cfuNEJi5hwuYxL6CvQIg
      Or download them directly from the PinUp Popper mediadatabase.

      Pinball (Stern 1977) EM

      Pinball (Stern 1977) Logo

      #187809
      multigame1209
      Participant
      @multigame1209

      Very nice game to play.

      Had error line 1079 and line 1089.

      I commented out both lines and now it seems to play ok.

      #187853
      Loserman76
      Participant
      @loserman76
      vipMemberContributor

      What version of VPX are you using? Version and Build please as I am not seeing this issue. I’m guessing it is related to the setlocale(1033) issue mentioned above.

    Viewing 20 posts - 1 through 20 (of 25 total)
    • You must be logged in to reply to this topic.
  • Please login to download.

  • ©2020 VPinBall.com

    Log in with your credentials

    or    

    Forgot your details?

    Create Account

    The Vpinball app

    FREE
    VIEW