• Don't forget to rate 1-5 stars! Check the support tab for any help or comments.

  • Don't forget to "THANK" or "LIKE" the Author's 1st post in support topic.

  • (6)
    « »
  • Download Info

    Thumb
  • PLEASE REMEMBER TO SAY 'THANKS' THE FIRST POST IN THE SUPPORT TOPIC BY CLICKING ON THE 'THANKS' BUTTON. THIS IS ALWAYS APPRECIATED!

    This special VIDEO backglass for Terminator 2 (Williams 1991) that can be used as an alternate or for JP Salas' new VPX table.

    This NOT a B2S file because what I wanted to do for my setup isn't possible as a b2s backglass.

    These have been made for 3 screen users ONLY that have the DMD on a separate screen or Real DMD.

    Backglass videos are 1920x1080 HD VIDEOS that continuously / seamlessly loop in both your front end system or when you play the actual T2 table.

    INCLUDED FILES:

    - - - - - - - - - - - - - - -

    T2-Alternate-Video-Backglass.mp4 (custom new original backglass)

    T2-Video-Backglass-1+2-Audio.mp3 (Audio for Video Backglass if using PinballX)

    T2-Video-Backglass-1+SFX.mp4 (Video and Audio Matted)

    T2-Video-Backglass-2+SFX.mp4 (Video and Audio - Edge to Edge)

    T2 (Williams 1991) RealColorDMD.avi

    T2 (Williams 1991) RealColorDMD.mp4

    T2 (Williams 1991) Wheel-1.png

    T2 (Williams 1991) Wheel-2.png

    If you need toppers for this table - I uploaded some to this site a while go already.

    HOW TO USE VIA PINBALLX :

    - - - - - - - - - - - - - -

    1.) Make sure you name / rename the VPX table a completely different name than any other version of the table you may have. So instead of naming the table Terminator 2 (Williams 1991).vpx - name the table T2-Alt (Williams 1991).vpx. This will prevent VPX from trying to "match" the b2s file to the table when it loads. You should NOT rename any b2s to that file name. It should load without any backglass present because there is no backglass named that special name or even close to that name.

    2.) Load PinballX's game manager and select "Add New" table. Use the manager to add the T2-Alt (Williams 1991) table as the table name. You can set the Description to whatever you want ... Using the pulldown menu, and select Backglass - and load the backglass .MP4 file you want to use.

    For PinballX users, PinballX doesn't play the AUDIO from any video file other than the Table Video files - so using the same pulldown you used to load the Backglass, load T2-Video-Backglass-1+2-Audio.mp3 as your audio for when you are navigating PinballX. PinballX will rename all the files to match the table when you do it this way.

    3.) IMPORTANT: Directly under the Table name and Description for this table in PinballX, there is a row of check boxes. Make sure "Hide Backglass" is UNCHECKED. This will keep the backglass video running when load the table through PinballX and keep it on the screen looping while you are playing the table.

    4.) Load PinballX, scroll through to this particular table, and go ahead and load it ... and go PLAY pinball!

    That's it!

    Similar styled front ends can use "basically" the same process. but I only use PinballX at the moment so I cannot provide any additional info how to use other front end systems.

    - - - - - - - - -

    This project took considerable time ... so "thanks" or comments in the support topic would be greatly appreciated.

    PLEASE NOTE: I create these image, videos, tables and backglass files for fun and for the dedicated VPX pinball users on this and other forum. I DID NOT create this for you to download as SELL, MAKE MONEY OR PROFIT ON ... You have been warned!

    DO NOT include any of these files with other downloads or projects without asking / getting permission first.

    All Logos, Copyrights and Trademarks are property of their respective owners.

    PROVIDED STRICTLY FOR PERSONAL / HOME USE AND NOT FOR COMMERCIAL SALE / RE-SALE OR DISTRIBUTION!

    See Description.

    Currently, there are 0 users and 0 guests visiting this topic.
    Viewing 3 posts - 1 through 3 (of 3 total)
    • Author
      Posts
    • #205411
      HiRez00
      Participant
      @hirez00
      Member

      PLEASE REMEMBER TO SAY 'THANKS' THE FIRST POST IN THE SUPPORT TOPIC BY CLICKING ON THE 'THANKS' BUTTON. THIS IS ALWAYS APPRECIATED!

      This special VIDEO backglass for Terminator 2 (Williams 1991) that can be used as an alternate or for JP Salas' new VPX table.

      This NOT a B2S file because what I wanted to do for my setup isn't possible as a b2s backglass.

      These have been made for 3 screen users ONLY that have the DMD on a separate screen or Real DMD.

      Backglass videos are 1920x1080 HD VIDEOS that continuously / seamlessly loop in both your front end system or when you play the actual T2 table.

      INCLUDED FILES:

      - - - - - - - - - - - - - - -

      T2-Alternate-Video-Backglass.mp4 (custom new original backglass)

      T2-Video-Backglass-1+2-Audio.mp3 (Audio for Video Backglass if using PinballX)

      T2-Video-Backglass-1+SFX.mp4 (Video and Audio Matted)

      T2-Video-Backglass-2+SFX.mp4 (Video and Audio - Edge to Edge)

      T2 (Williams 1991) RealColorDMD.avi

      T2 (Williams 1991) RealColorDMD.mp4

      T2 (Williams 1991) Wheel-1.png

      T2 (Williams 1991) Wheel-2.png

      If you need toppers for this table - I uploaded some to this site a while go already.

      HOW TO USE VIA PINBALLX :

      - - - - - - - - - - - - - -

      1.) Make sure you name / rename the VPX table a completely different name than any other version of the table you may have. So instead of naming the table Terminator 2 (Williams 1991).vpx - name the table T2-Alt (Williams 1991).vpx. This will prevent VPX from trying to "match" the b2s file to the table when it loads. You should NOT rename any b2s to that file name. It should load without any backglass present because there is no backglass named that special name or even close to that name.

      2.) Load PinballX's game manager and select "Add New" table. Use the manager to add the T2-Alt (Williams 1991) table as the table name. You can set the Description to whatever you want ... Using the pulldown menu, and select Backglass - and load the backglass .MP4 file you want to use.

      For PinballX users, PinballX doesn't play the AUDIO from any video file other than the Table Video files - so using the same pulldown you used to load the Backglass, load T2-Video-Backglass-1+2-Audio.mp3 as your audio for when you are navigating PinballX. PinballX will rename all the files to match the table when you do it this way.

      3.) IMPORTANT: Directly under the Table name and Description for this table in PinballX, there is a row of check boxes. Make sure "Hide Backglass" is UNCHECKED. This will keep the backglass video running when load the table through PinballX and keep it on the screen looping while you are playing the table.

      4.) Load PinballX, scroll through to this particular table, and go ahead and load it ... and go PLAY pinball!

      That's it!

      Similar styled front ends can use "basically" the same process. but I only use PinballX at the moment so I cannot provide any additional info how to use other front end systems.

      - - - - - - - - -

      This project took considerable time ... so "thanks" or comments in the support topic would be greatly appreciated.

      PLEASE NOTE: I create these image, videos, tables and backglass files for fun and for the dedicated VPX pinball users on this and other forum. I DID NOT create this for you to download as SELL, MAKE MONEY OR PROFIT ON ... You have been warned!

      DO NOT include any of these files with other downloads or projects without asking / getting permission first.

      All Logos, Copyrights and Trademarks are property of their respective owners.

      PROVIDED STRICTLY FOR PERSONAL / HOME USE AND NOT FOR COMMERCIAL SALE / RE-SALE OR DISTRIBUTION!

      3 users thanked author for this post.
      #205435
      0Cool
      Participant
      @0cool
      Member

      Wow! Your best work so far, HiRez!! Incredible…you are a true artist. Thanks for sharing (and making this hobby even more fun!!!). JPSalas as well, what a great playing table.¬† :good: :good: :good:

      #205500
      Maiguelon
      Participant
      @maiguel0n

      Incredible!! Now I install it.
      I see that you have taken the size that by calling it one way is already evident.
      I love HiRez00 !!

      If you don’t mind, I’d like to add the overlay to the Terminator puppack I made, it’s really cool.
      Although there will be a moment when the DMD would not be seen, but how they change according to the game … hehehee

      Excellent !!!

    Viewing 3 posts - 1 through 3 (of 3 total)
    • You must be logged in to reply to this topic.
  • Please login to download.

  • ¬©2020¬†VPinBall.com

    Log in with your credentials

    or    

    Forgot your details?

    Create Account

    The Vpinball app

    FREE
    VIEW