• Don't forget to rate 1-5 stars! Check the support tab for any help or comments.

  • (2)
    « »

    Time Fantasy (Williams 1983) - Incandescent Bulb + Rainbow RGB LED B2S Mod

    Based on backglass by Mfuegemann.

    A combined B2S double feature by RpT!

    The original backglass was way too bright for my setup such that I couldn't even make out the detail of the artwork. So as that needed fixing I decided to also add some extra animations and whatnot to go with my enhanced lightshow for this table (see my youtube channel).

    Needless to say, neither of these options are intended to emulate a factory version of this machine so apologies to the hardcore purists! ;)

    "Authentic" mode - Incandescent Bulbs

    Designed to replicate a worn machine with bulbs of varying age, condition and type (whoever owns this table might have swapped a few out)! A warm feeling backglass that's non intrusive but also has a few subtle effects thrown in for interest.

     

    Preview:

    https://www.youtube.com/watch?v=kEYWj-05PYI

     

    "Fantasy" mode - Rainbow RGB LED Mod

    Designed to compliment my psychedelic lighting (see the youtube) for people who think the backglass should also be colorful! Using some of the lamp triggers that I left out from that lightshow, hopefully this also enhances the theme of the table.

     

    Preview:

    https://www.youtube.com/watch?v=tTj7UQdk8ns

    Install note

    Remember that to change between the two modes, right click on the backglass while the game is running. You may need to switch VPX into windowed mode. Once you change between "fantasy" or "authentic" restart the emulator.

    Bonus NOTE 

    Thanks for reading this far! For the VPX table itself, uncheck "show mesh" on lights "s1" and "s2" to resolve a clipping issue where the bulbs show through the sling plastics. Hopefully this table is now DONE and set up to the max so i can move on to something new! ^-^

    - Drop the directb2s file into your tables folder of VPX

    - Ensure it's named the same as the table!

    - Remember that to change between the two modes, right click on the backglass while the game is running. You may need to switch VPX into windowed mode to see the mouse cursor. Once you change between "fantasy" or "authentic" restart the emulator.

    This topic contains 4 replies, has 5 voices, and was last updated by  Shannon 3 months, 4 weeks ago.

    Viewing 5 posts - 1 through 5 (of 5 total)
    • Author
      Posts
    • #118247
       -RpT 
      Participant
      Member

      Time Fantasy (Williams 1983) - Incandescent Bulb + Rainbow RGB LED B2S Mod

      Based on backglass by Mfuegemann.

      A combined B2S double feature by RpT!

      The original backglass was way too bright for my setup such that I couldn't even make out the detail of the artwork. So as that needed fixing I decided to also add some extra animations and whatnot to go with my enhanced lightshow for this table (see my youtube channel).

      Needless to say, neither of these options are intended to emulate a factory version of this machine so apologies to the hardcore purists! ;)

      "Authentic" mode - Incandescent Bulbs

      Designed to replicate a worn machine with bulbs of varying age, condition and type (whoever owns this table might have swapped a few out)! A warm feeling backglass that's non intrusive but also has a few subtle effects thrown in for interest.

       

      Preview:

      https://www.youtube.com/watch?v=kEYWj-05PYI

       

      "Fantasy" mode - Rainbow RGB LED Mod

      Designed to compliment my psychedelic lighting (see the youtube) for people who think the backglass should also be colorful! Using some of the lamp triggers that I left out from that lightshow, hopefully this also enhances the theme of the table.

       

      Preview:

      https://www.youtube.com/watch?v=tTj7UQdk8ns

      Install note

      Remember that to change between the two modes, right click on the backglass while the game is running. You may need to switch VPX into windowed mode. Once you change between "fantasy" or "authentic" restart the emulator.

      Bonus NOTE 

      Thanks for reading this far! For the VPX table itself, uncheck "show mesh" on lights "s1" and "s2" to resolve a clipping issue where the bulbs show through the sling plastics. Hopefully this table is now DONE and set up to the max so i can move on to something new! ^-^

      7 users thanked author for this post.
      #118255
       Thalamus 
      Moderator
      ContributorMemberModerator

      Preview looks good. I don’t remember if the db2s that I’ve got is something I want to keep or a replacement is to be considered. Anyway. Thank you for at least the aternative, and who knows. The replacement.

      #118334
       Ben Logan2 
      Participant
      Member

      Looks cool. Love this ganjafarmer table, too.

      #118336
       robertms 
      Participant
      Member

      Very nice work RpT, thank you! Great complement to an excellent table, love the psychedelic mode  :good:

      #118497
       Shannon 
      Participant
      Member

      Love the Fantasy mode. Great job!

    Viewing 5 posts - 1 through 5 (of 5 total)

    You must be logged in to reply to this topic.

  • Please login to download.

  • ©2019 VPinBall.com

    WP2FB Auto Publish Powered By : XYZScripts.com
    Vpinball.com

    Log in with your credentials

    or    

    Forgot your details?

    Create Account