• Don't forget to rate 1-5 stars! Check the support tab for any help or comments.

  • Don't forget to "THANK" or "LIKE" the Author's 1st post in support topic.

  • (18)
    « »
  • Download Info

    Thumb
    • Author: NailBuster
    • Version: v1.0
    • Views: 5919
    • File size: 107.65 MB
    • Downloads: 3114
    • Updated: April 22, 2019
    • Categories:
  • My Tom & Jerry PuP-Pack is ready!!! Shout out to TattGuy who put a ton of work in making an awesome hand-drawn custom topper for us with this pack!

    Also big Thanks to Watacaractr for the VPX table and for giving me his directb2s backdrop for the video frame overlay.

    https://youtu.be/XhBzxtq9WZQ

    unzip into your PuPVideos as usual.

    This is exactly like Bugs-Bunny PuPPack. YOU KEEP your directb2s as this will pop-over your backglass during ball launch. Enjoy.

    default is to use the ROM "TOMJERRY" but if you're using the other rom then just rename folder.

    note:  There's over 50 clips that will randomly play ONLY during a ball launch.... simple, and fun to watch as you get to choose when to launch.

    If you get a Topper shown that you didn't expect, its because your PuP-Displays has the default to ON for topper.  You should run PinUPPlayerConfigDisplays.bat and set your topper to default 'OFF'.  If you want to turn the topper only off on this pack then run PinUPPackeditor.exe and set to OFF.

    Require V1.4 PinUP Player.

    http://www.nailbuster.com/wikipinup/doku.php?id=install_guide

    issues?  start here:  http://www.nailbuster.com/wikipinup/doku.php?id=puppack_troubleshoot

     

     

    Currently, there are 0 users and 0 guests visiting this topic.
    Viewing 11 posts - 21 through 31 (of 31 total)
    • Author
      Posts
    • #152426
      outhere
      Moderator
      @outhere
      MemberContributorvipModerator

      You are saying – The problem is the puppack plays with all those games and if you remove the puppack it still plays with all those games
      Use a separate roms for Tom&Jerry and Bubba
      https://vpinball.com/VPBdownloads/categories/pinball-machine-roms/

      Or You can use this
      http://www.nailbuster.com/wikipinup/doku.php?id=pinup_optional

      #152428
      Thalamus
      Moderator
      @thalamus
      ContributorMemberModerator

      Your front-end has the ability to run things pre and post of the table loading. What do you think it is that makes it see those pup packs ? A folder name.

      What about renaming that folder from eg. _disabled_romname to romname pre and post loading ? Should work.

      #160628
      Shamous
      Participant
      @shamous

      Thanks Nailbuster. This pup pack is a riot. I can’t stop smiling when I play it. My kids love it too. “TOUCHÉ PUSSYCAT!”  And  thanks to Watacaractr the Author of the table too.  What an awesome job

      #161229
      elvinu
      Participant
      @elvinu
      Member

      For single screen users that launch with the PinUpMenu frontend:

      This table was really hard for me to get to work.  I wanted the backglass (Tom and Jerry.directb2s) to reappear whenever a video finished and it wasn’t happening.  Furthermore, the video wasn’t reappearing (whenever a ball is launched) though the overlay was.

      I saw how the table should work with “Mame In a Box’s” YT Vid: Tom and Jerry PuP (VPX)

      I know I’m supposed to keep the pup files intact and just edit the bat file.  Or at the most, set Topper to ForceOn, but this didn’t fix my issues.

      I then realized this table is similar to Wizard of Oz in that the backglass returns after videos. I then copied a setting from Wizard’s screens.pup (mainly added the “Backglass-No Videos!” as the second line), made a few other adjustments to the screens.pup (specified an overlay and added the LooneyClips folder to a new screen), and I finally got it to work.

      Here’s my settings; hope it works for you:

      screens.pup:
      ScreenNum,ScreenDes,PlayList,PlayFile,Loopit,Active,Priority,CustomPos
      0,Topper,Topper,”Tom And Jerry-1.m4v”,,ForceOn,,
      6,”Backglass-No Videos!”,,,,ForceBack,,
      2,Backglass,PuPOverlays,tomjerryFrame2.png,,ForcePop,,”99,27.9,30.3,33.6,46.4″
      7,Other1/BackGlass2,LooneyClips,,,ForcePop,,
      1,DMD,,,,ForceOn,,”99,32.1,36.3,29.4,42.1″
      3,PlayField,,,,off,,”99,26,24,34.9,48.7″
      4,”Music”,””,””,,off,,””
      5,”Menu”,””,””,,off,,””
      8,”Other2/Topper2″,””,””,,off,,””
      9,”GameInfo”,””,””,,off,,””
      10,”GameHelp”,””,””,,off,,””

      pupinit.bat
      start “” pupwinpos.exe “PUPSCREEN*” 0 2 0
      start “” pupwinpos.exe “Form1” -1 2 0
      start “” pupwinpos.exe “Visual Pinball Player” -2 2 1

      Thank you NailBuster, TattGuy, Watacaractr for the pup-pack to this table!

      #179870
      LordBeric
      Participant
      @lordberic

      hi, when my upper right flipper hit the ball (and only in this case), playing video stop. restart when ball is lost

      #202045
      hur13y
      Participant
      @hur13y

      I had to edit the PuP-Pack to get the Topper to show on my full screen DMD (3rd screen 15.6″ monitor) by setting it to ForceOn. The issue I am seeing though is the DMD appears to be showing in the correct location under the Topper on this 3rd screen but it appears to have the right side of the DMD cut off…some of the text is not showing. I confirmed the DMD section is fitting inside the monitor edges and is not cut off due to that. Is there something I am missing in my settings? I am using Freezy 1.8.0 if that helps.

      #202050
      outhere
      Moderator
      @outhere
      MemberContributorvipModerator

      I had to edit the PuP-Pack to get the Topper to show on my full screen DMD (3rd screen 15.6″ monitor) by setting it to ForceOn. The issue I am seeing though is the DMD appears to be showing in the correct location under the Topper on this 3rd screen but it appears to have the right side of the DMD cut off…some of the text is not showing. I confirmed the DMD section is fitting inside the monitor edges and is not cut off due to that. Is there something I am missing in my settings? I am using Freezy 1.8.0 if that helps.

      With that game you do not use Freezy
      Hit F1 and uncheck both DMD’s
      3 screen setup
      https://vpinball.com/forums/topic/3-screen-set-up-and-more/

      #202106
      hur13y
      Participant
      @hur13y

      I had to edit the PuP-Pack to get the Topper to show on my full screen DMD (3rd screen 15.6″ monitor) by setting it to ForceOn. The issue I am seeing though is the DMD appears to be showing in the correct location under the Topper on this 3rd screen but it appears to have the right side of the DMD cut off…some of the text is not showing. I confirmed the DMD section is fitting inside the monitor edges and is not cut off due to that. Is there something I am missing in my settings? I am using Freezy 1.8.0 if that helps.

      With that game you do not use Freezy

      Hit F1 and uncheck both DMD’s

      3 screen setup

      https://vpinball.com/forums/topic/3-screen-set-up-and-more/

      Thank you for the link.

      I have read and reread the posts and links from the post and I think I am still missing something to get my 3rd screen showing the PUPPack topper and a proper scoring pane. I tried to edit the Table script to change the value Hidden = 0 to Hidden = 1, compiled the script, reran the table and it still showed the problem DMD score view. It definitely has some of the DMD text cut off on the right side. I know you mentioned this table has no DMD so not sure how the 3rd screen is supposed to look or What screen the scoring information should reside.

       

      F1A9715D-6234-4FE0-BA49-466C2BE4CEAA

      In watching Major Frenchy’s YouTube video of this PUPPack It shows his cabinet showing the same issue with cut off DMD characters. Apparently in the game it uses 20 characters across the screen and Freezy DMD is limited to 16 so characters are dropped.

      i know you mention not to use Freezy on this table and I have tried to disable it but then I get no scoring displayed on the 3rd screen or anywhere else.

       

      • This reply was modified 2 months ago by hur13y.
      #202526
      Rafael Tetsuo
      Participant
      @rafaeltetsuo

      NailBuster, thank you for that.
      This table deserves something like that.
      I use 2 screens and I’ve put the dmd to show in the lower part of the backglass, but I doesn’t show when the videos pop up. Still awesome to play anyways.
      Thanks a lot man! :good:

      #202529
      outhere
      Moderator
      @outhere
      MemberContributorvipModerator

      NailBuster, thank you for that.
      This table deserves something like that.
      I use 2 screens and I’ve put the dmd to show in the lower part of the backglass, but I doesn’t show when the videos pop up. Still awesome to play anyways.
      Thanks a lot man! :good:

      Try this —  https://vpinball.com/forums/topic/mandalorian-puppack/#post-178391

      #211786
      darthwhat
      Participant
      @darthwhat

      Hey guys,

      How do I get the directb2s to play nicely with the puppack? see attached screen shot, this is how it shows when I don’t touch the puppack and leave as is. It doesnt show the videos and just shows some of the backglass.  If I change the puppack to force on the backglass I can see the videos but when they are finished playing its just a black screen TV, the directb2s hides behind the pup backglass. Any ideas?

      Attachments:
    Viewing 11 posts - 21 through 31 (of 31 total)
    • You must be logged in to reply to this topic.
  • Please login to download.

  • ©2020 VPinBall.com

    Log in with your credentials

    or    

    Forgot your details?

    Create Account

    The Vpinball app

    FREE
    VIEW