• Don't forget to rate 1-5 stars! Check the support tab for any help or comments.

  • (6)
    « »

    This is a Mod of 32assassin's VPX 10.5 Totem.  I want to add a special thanks to 32assassin for allowing me to mod his Totem table.  I am lucky enough to have the actual table sitting next to me so I wanted to take the original and make small corrections to make it visually correct as much as possible.  I also changed the lighting to reflect the color bulbs that I put in mine after watching a TNT video on how they did their table.

    I also want to thank Wildman for his mods to his existing B2S.  I reached out to him with a couple corrections and immediately he fixed them .

    Thanks to Bord for updating the flippers with a detailed set

    The next revision will be to add a couple missing switches and update the DOF config file

    1.0

    Top Guide rails were too long, shortened and adjusted

    Pop bumper caps changed to reflect actual ones

    Narrowed the shooter lane

    Moved posts, rubbers, and rails based on table layout

    Changed plastic on the middle left as original was too long

    Moved screw and added a few to make visually correct

    B2S changes

    "Number to match" and "Ball in Play" were reversed

    1.1

    Bord updated the flippers with a nicely detailed set

    Upper lights reworked for a more natural look.

    A couple other GI lights updated

    1.2

    I added 3 switches that were missing  and adjusted another.

    Got rid of slingshot on left side and replaced it with a switch since Totem only has a slingshot on the rt side.

    Added triggers in the script for DOF and submitted a change on the Dof config site

    Added PF and BG videos in the new pack

    This topic contains 42 replies, has 18 voices, and was last updated by  Tom 22 hours, 4 minutes ago.

    Viewing 20 posts - 1 through 20 (of 43 total)
    • Author
      Posts
    • #110654
       Tom 
      Participant
      Member

      This is a Mod of 32assassin's VPX 10.5 Totem.  I want to add a special thanks to 32assassin for allowing me to mod his Totem table.  I am lucky enough to have the actual table sitting next to me so I wanted to take the original and make small corrections to make it visually correct as much as possible.  I also changed the lighting to reflect the color bulbs that I put in mine after watching a TNT video on how they did their table.

      I also want to thank Wildman for his mods to his existing B2S.  I reached out to him with a couple corrections and immediately he fixed them .

      Thanks to Bord for updating the flippers with a detailed set

      The next revision will be to add a couple missing switches and update the DOF config file

      8 users thanked author for this post.
      #110673
       bord 
      Participant
      Member

      Cool, @armyaviation. Looking forward to trying it out. Thanks for sharing!

      #110676
       Thalamus 
      Moderator
      ContributorMemberModerator

      That is a nice surprise. Looking at the preview, you seems to have done a good job on the visual part. Soon firing it up to test the rest :)

      Thank you @armyaviation and @32assassin

      • This reply was modified 1 month ago by  Thalamus.
      #110680
       BorgDog 
      Participant
      MemberContributorvip

      Cool beans @armyaviation.  always love some system1 improvements.

      For flippers I suggest swapping in @bord primitives and textures found https://vpinball.com/VPBdownloads/gottlieb-flipper-mesh-pack  , he did a great job and they look awesome and easily customizeable.

      1 user thanked author for this post.
      #110681
       Tom 
      Participant
      Member

      I believe I tried those and couldn’t figure out a few things.  I got the flippers in the correct place at the correct angle but instead or rotating the rolled from top to bottom.  32 was giving me advice on it but wasn’t successful.  also the pf color was bleeding through the flippers in spots.  was weird.  I will continue to try.

      #110683
       Thalamus 
      Moderator
      ContributorMemberModerator

      If they rolled – you probably changed the wrong axis. I would – pick a pretty recent table from the guy that mentions the change.

      It would just make sense that he recently used Bord’s flippers – don’t you think ? ;-)

      • This reply was modified 1 month ago by  Thalamus.
      #110685
       BorgDog 
      Participant
      MemberContributorvip

      yeah, most of the older primitives you had to rotate to place on the table correctly, bords you just place them, but it does mean however you need to do the rotation of a different axis.  check out my recent Dragon update on how they are done, particularily the flippertimer stuff (need to do rotz instead of rotx or whatever the other was).

      #110687
       Tom 
      Participant
      Member

      thanks

      #110695
       remy 
      Participant

      Hello,

      Thanks for your job on this table !

      But i can’t find the rom !?

      Could you give me advice ?

      #110696
       Pinbolt 
      Participant
      Member

      Super table, thank you.

      #110699
       outhere 
      Participant
      Member

      Try here

      http://vpuniverse.com/forums/search/

      Hello,

      Thanks for your job on this table !

      But i can’t find the rom !?

      Could you give me advice ?

      #110711
       Tom 
      Participant
      Member

      Bord added a beautiful set of flippers, Thanks!!!  I noticed a couple of the switches were either missing or not working.  there are two under the plastic left of the bumpers,  One next to the 10,000 bonus light and one under the plastic next to the 4,000 bonus light.  I also want to update the dof config file for this table and add a few goodies.

      2 users thanked author for this post.
      #110713
       Ben Logan2 
      Participant
      Member

      Looks beautiful

      #110714
       Micronaut 
      Participant
      Member

      great job  :good:

      thanks  :bye:

      #110717
       Wildman 
      Participant
      Member

      Updated the Bg at  VPU too ;-)

      http://vpuniverse.com/forums/files/file/2704-totem-gottlieb-1979/

      4 users thanked author for this post.
      #110723
       Tom 
      Participant
      Member

      Thanks Wildman, I am going to still try and get a scan of the backglass so we can update it.  The only other change to the backglass I would like to do is make the “Gottlieb” glow purple.  I changed my bulb and it looks great.

      1.2 is up.  I added missing switches, swapped a switch for the L Sling since totem doesn’t have one on that side.  I also updated the DOF in script and submitted a change on dof configtool site. Don’t know how long that takes to update. Added PF and BG videos also in download

      The only thing that bothers me is the primitive for the yellow plastic guide lanes at top.  Since they are canted to the side they look blocky on the sides.  Don’t know how to smooth them out.  Other than that I am happy

      • This reply was modified 1 month ago by  Tom.
      #110747
       KiwiBri 
      Participant

      wow… this looks great.   I don’t DL many older tables, and I’ve decided this needs to be on my cab! Thanks so much!

       

      #110764
       STAT 
      Participant
      MemberContributor

      I did a quick Test yesterday, thanks Man – this is really a great Update.
      Thanks also to 32assassin again, and Wildman for BG, thanks bord for the Flippers :good:

      Can’t wait to get the 1.2 tonight B-)

      #110788
       vogliadicane 
      Participant
      Member

      awwwsome table, thanks alot! :good:

      #110790
       Darquayle 
      Participant

      Great table.  I don’t see the vari-target on the left scoring points.  Is this missing a switch?  Thanks!

    Viewing 20 posts - 1 through 20 (of 43 total)

    You must be logged in to reply to this topic.

  • Please login to download.

  • ©2019 VPinBall.com

    WP Facebook Auto Publish Powered By : XYZScripts.com
    Vpinball.com

    Log in with your credentials

    or    

    Forgot your details?

    Create Account