• Don't forget to rate 1-5 stars! Check the support tab for any help or comments.

  • Don't forget to "THANK" or "LIKE" the Author's 1st post in support topic.

  • (1)
    « »
  • Download Info

    Thumb
  • Added the VR conversions to this table that was done by rothbauerw and dark (thanks for the permission to mod!).   It really is a fun table to play and looks great in VR!  Sixtoe provided a once over and did a couple additional tweaks, including a fix to the outlane triggers and some reflections.

    Once again, I changed the typical minimal room slightly to have a wood floor, and a slightly different wall... which gives an appearance of lighting from the pinball machine casting on the wall.  You can change back to the original walls and floor in the options section of the script.  I also added a golf course environment as well (option 2 in the settings).

    Anyway, I hope you enjoy!  And thanks again to rothbauerw and Sixtoe!

    Have a working VPVR install.

    V 1.0:  VR Tweaks, custom environment, and a few other minor adjustments to fit in VR Cab.

    Currently, there are 0 users and 0 guests visiting this topic.
    Viewing 8 posts - 1 through 8 (of 8 total)
    • Author
      Posts
    • #207843
      pgheyd
      Participant
      @pgheyd

      Added the VR conversions to this table that was done by rothbauerw and dark (thanks for the permission to mod!).   It really is a fun table to play and looks great in VR!  Sixtoe provided a once over and did a couple additional tweaks, including a fix to the outlane triggers and some reflections.

      Once again, I changed the typical minimal room slightly to have a wood floor, and a slightly different wall... which gives an appearance of lighting from the pinball machine casting on the wall.  You can change back to the original walls and floor in the options section of the script.  I also added a golf course environment as well (option 2 in the settings).

      Anyway, I hope you enjoy!  And thanks again to rothbauerw and Sixtoe!

      9 users thanked author for this post.
      #208027
      ababapanos
      Participant
      @ababapanos

      the game not start. sound the coin but not working

      #208046
      yves31
      Participant
      @yves31

      I can hear the coin going in but the credit still say “0”…

      #208139
      pgheyd
      Participant
      @pgheyd

      I’m guessing your issue is a focus issue.  The VPX table is not the active window when you launch the table.  This is a common problem with some VR tables.  You can manually alt-tab to get the VPX play window active.  Or, grab the “VPX Stay On Top” program that Ba Sti did.  You can find that here:

      ..small traytool to bring “Visual Pinball Player” on top. This window needs focus for controlling your pinball. It works with 2D VPX and VR VPX.  If you are using Ba Sti’s vr launcher, you don’t need this.
      https://vpinball.com/VPBdownloads/vpxontop/

      #208198
      bargle
      Participant
      @bargle

       

      To manually set up the nvram to accept coins, do the following:

      After the self test and when it says Game Over, Press 7, Wait for it to show you the menu with bookkeeping, adjustments, selftest, etc – press left flipper 3 times to move the highlight to adjustments, press right flipper to select that option, press 1, press 1, then quit and replay the table and you have your nvram set to accept coins, etc.

      #208449
      yves31
      Participant
      @yves31

      Thanks for trying to help :)

       

      But even after I try both solution the problem is still the same.

      I push on 5 and I can hear the coin sound… but the credit still stay to 0 …… so I can put a 100 coin but the credit always stay at zero so I can not push “1” to start teh game.

       

      Any more idea of what could be the problem?

       

      Thanks in advance.

      #208450
      rothbauerw
      Moderator
      @rothbauerw
      ModeratorContributorMembervip

      Thanks for trying to help :)

      But even after I try both solution the problem is still the same.

      I push on 5 and I can hear the coin sound… but the credit still stay to 0 …… so I can put a 100 coin but the credit always stay at zero so I can not push “1” to start teh game.

      Any more idea of what could be the problem?

      Thanks in advance.

      Bargle’s suggestion above should solve your problem.  Follow those instructions before inserting a coin, otherwise it won’t recognize that you are inserting coins.  They just fall into the bottom of the machine without giving you credits.

      Current Project: Perpetual updates of VPX physics.

      #208504
      pgheyd
      Participant
      @pgheyd

      Just a thought…  maybe try delete the nvram and cfg teed off files.  (under vpinmame/cfg and vpinmame/nvram).  That will start a fresh rom nvm and reinitalize.

      Make sure you are using teedoff3.zip rom.

      From the original vpx table, (https://vpinball.com/VPBdownloads/teed-off-gottlieb-1993/  ) in the instructions, they indicated:

      “Getting the ROM up and running can be tricky.  Follow these instructions to load factory settings:

      Press the “7” key
      Press “End” to open the coin door
      Use the “7” key to bring up the menu
      Use the flippers to go to “Game Adjustments”
      Press the start button (“1” on my machine) to load factory settings
      Press start one more time
      Press the “Home” key to SLAM TILT and reload the game”

       

      Other troubleshooting indicated:  maybe try a different ROM, “teedoff.zip”.

       

    Viewing 8 posts - 1 through 8 (of 8 total)
    • You must be logged in to reply to this topic.
  • Please login to download.

  • ©2020 VPinBall.com

    Log in with your credentials

    or    

    Forgot your details?

    Create Account

    The Vpinball app

    FREE
    VIEW