Daryl

There is no audio for the video clips .. its something that might get added in a future release. When pulled from the rom, the audio is not tied to the video.

I am no pup expert – but it sounds like you want a 3 screen setup but turnoff the 2nd screen (bg). I *think* that means unzip the 3 screen zip file then use the setup program to disable he backglass.

Does it load from visual pinball? ie no front end, just open vp, and open the table? Might there be a typo or something wrong.

Basically you are missing the rom and/or the backglass. Look in  the script where it says cgname and find out the name of the rom it is expecting.

This any help?
https://pinside.com/pinball/forum/topic/plastics-for-phoenix

Vizzini wrote:
Wow. Nice work with all that code! Looks very nice.

Question: Is it normal to have fairly small text font on DMD (music)?

Vizzini — that screen shot appears to be as designed..

That sure looks like 1 screen — did I say you needed had to have 2 or 3 screens? Please tell me you have a 2nd screen.

The Stern Logo is in the topper — if you want that smaller reduce the topper or turn it off/diable if you dont have one.

As for your second post – no idea what that is. Sorry.

and you can use PinUpPlayerConfigDisplays.bat to tweak your pup sizings to meet your needs. (Note this changes all your tables that use PUP)

Oh and check the obvious .. can you play any of the sounds outside of the game? Click on anything in this directory for example..

(Your exact location may differ slightly ie. C: instead of D: for example)

@fourbanks .. no expert on pinupsystem (you might want to ask in another thread) but I have this when I run PinUpPlayerConfigDisplays.bat

..seems like you are not getting the Music channel. So check that you have this default setting.

Thanks … just some clarification on my part .. So for custom tables, I should just stick with Flashlevel value of 1. I did see the solmodcallback and was going to research that a bit.

I am using your code in my builds — I do appreciate your efforts for sure..!

Attached is the pic about the screws .. seems you missed some materials – so…[Read more]

Can be on a desktop *if* you have 2 monitors .. or 3.

No changes required! Get the newer version 1.03 table and Media available here…

If you had to delete something then I would have to say that something is wrong/unusal with your setup. B2s/DirectB2s/PinupPlayer ..

You should have this folder & folders under your pinUPSystem directory.

Unzip either the _3screen or _2screen zip file to make it show either the imbedded DMD into the BG (2 screen) or if you have a separate…[Read more]

There is no audio embedded in the videos from the roms .. sorry cant do anything about that..as for the sounds in the bonus movie .. added a few of those in the next release.

Couple things that get me .. for those looking at the example table..

The flasherflash10 flasher, for example, How do you determine the RotX, RotY, RotZ values? And why is there an ugly flasher object imbeded into the flasher image?

As to how to use them .. copy and past by selecting say 1 level – which ever has the right style/direction that…[Read more]

Looks a lot like Nugent that I and others have done.

The quick answer (and I am no expert) is to be sure you have the latest media pack then unzip, in your case, the 2 screen zip file that is in the root directory of the zip. This will setup the pupdisplay for your config.

I am bit rusty but I think you have it “dtLL” is just a name given to the set of drop targets .. the targets on the table are named sw25, sw26, etc.

They act as a group of 5. dtLL is quite likely lower left.