Forum Replies Created

Viewing 20 posts - 1 through 20 (of 217 total)
  • Author
    Posts
  • #220254
    Badazzwi
    Participant
    @badazzwi
    Member

    43UK6300 I’m pretty sure is the model I have

    Hi my name is Barry and I'm a virtual pinball addict.

    #220228
    Badazzwi
    Participant
    @badazzwi
    Member

    I voted ips because that’s what my lg is and it has performed well for me. I cant really say which is best because I never used any of the others.

    Hi my name is Barry and I'm a virtual pinball addict.

    #219664
    Badazzwi
    Participant
    @badazzwi
    Member

    Thank you skitso! Your mods are amazing. Glad to hear VPin Workshop is gaining another talented individual.

    Thank you roth, bord, the original authors and everyone else involved in this release.

    Hi my name is Barry and I'm a virtual pinball addict.

    #219277
    Badazzwi
    Participant
    @badazzwi
    Member

    3 screens is supported when using pup

    Hi my name is Barry and I'm a virtual pinball addict.

    #218507
    Badazzwi
    Participant
    @badazzwi
    Member

    In between trying different versions of the pup pack are you completely removing the old one?

    Make sure you run the bat file inside the pup pack that matches your screen configuration.

    Hi my name is Barry and I'm a virtual pinball addict.

    #218203
    Badazzwi
    Participant
    @badazzwi
    Member

    I like the idea of this. As with anything people will have mixed opinions on it.

    I myself don’t contribute any content due to lack of skills and time. Hopefully some day I can. I do however greatly appreciate those that do and share it with the community. I understand the countless amount of time that goes into creating and maintaining the content that we all enjoy. Those that give all that time deserve to be recognized. I believe that this is something meant for the community to show appreciation.

    This hobby definitely continues to grow. The biggest enemy is those that continue to sell all the hard work of the creators against their wishes. That is uncalled for and complete bullshit.

    Hi my name is Barry and I'm a virtual pinball addict.

    1 user thanked author for this post.
    #204736
    Badazzwi
    Participant
    @badazzwi
    Member

    This would be nice to have in visual pinball. I’d throw some bucks on it.

    Hi my name is Barry and I'm a virtual pinball addict.

    #204550
    Badazzwi
    Participant
    @badazzwi
    Member

    I found this if it helps

    https://forums.maslowcnc.com/t/pinball-machine/13078

    There are a few cnc build threads over at vpf. Maybe try contacting the authors of those.

    Plans from mameman at vpu

    http://vpuniverse.com/forums/topic/171-plans-williams-widebody-cabinet-plans/

    There are also some flat packs already cut out from places like virtuapin if you want a little easier route.

     

    Hi my name is Barry and I'm a virtual pinball addict.

    #204136
    Badazzwi
    Participant
    @badazzwi
    Member

    I’m guessing something to do with the rom. Make sure you have the correct rom for the table you are loading. The rom should be zipped and in the vpinmame\roms folder. Check the roms by going into vpinmame folder. Run setup and hit the test button to check individual roms. Also hit the install button under setup to make sure vpinmame is installed.

    Hi my name is Barry and I'm a virtual pinball addict.

    1 user thanked author for this post.
    #204091
    Badazzwi
    Participant
    @badazzwi
    Member

    What is the error you get?

    Hi my name is Barry and I'm a virtual pinball addict.

    #202922
    Badazzwi
    Participant
    @badazzwi
    Member

    I enjoy this table. Thank you for the big update. It looks really good.

    Hi my name is Barry and I'm a virtual pinball addict.

    #202489
    Badazzwi
    Participant
    @badazzwi
    Member

    The 980 Is a powerful card but a bit outdated. I’d go with the 1060 due to the fact it has more ram.

    You can run 4k on either. I ran 4k on my 970 for a bit. Just had to tweak a lot of settings.

    Hi my name is Barry and I'm a virtual pinball addict.

    #201817
    Badazzwi
    Participant
    @badazzwi
    Member

    Looks amazing from the screenshot. Cant wait to try it out.

    Hi my name is Barry and I'm a virtual pinball addict.

    #200790
    Badazzwi
    Participant
    @badazzwi
    Member

    I’m right there with ya Matt. I didnt put much time in this table until recently and managed to claim the grand champion. That’s a big accomplishment for me (my avatar says it all). Its a gorgeous table.

    Hi my name is Barry and I'm a virtual pinball addict.

    #200661
    Badazzwi
    Participant
    @badazzwi
    Member

    @hoop22 Did you try adjusting the rom volume with 8 and 9 keys?

    Hi my name is Barry and I'm a virtual pinball addict.

    1 user thanked author for this post.
    #200553
    Badazzwi
    Participant
    @badazzwi
    Member

    Loserman provides wheels with most of his tables. There are a lot of wheels available at vpf also.

    Hi my name is Barry and I'm a virtual pinball addict.

    #200278
    Badazzwi
    Participant
    @badazzwi
    Member

    Did you look at section 111 of the guide. It discusses that very issue. My playfield tv fortunately had a setting to enable it to turn on with the computer. My backglass tv unfortunately does not but I havent gotten around to figuring that out yet. Another thing I was looking at was a cec adapter which might work as well.

    Hi my name is Barry and I'm a virtual pinball addict.

    #199068
    Badazzwi
    Participant
    @badazzwi
    Member

    Thanks a lot Siggi! I’m waiting ever so patiently for season 2 to drop. This should help the wait.

    Hi my name is Barry and I'm a virtual pinball addict.

    1 user thanked author for this post.
    #198513
    Badazzwi
    Participant
    @badazzwi
    Member

    I can only speak for pinbally as it’s the frontend I use. Setup is global for all games. The topper is set to keep running when a game is launched. I use 600 height for the topper and 480 for the dmd.

    Hi my name is Barry and I'm a virtual pinball addict.

    #198483
    Badazzwi
    Participant
    @badazzwi
    Member

    20200829_104259

    Either will work. If you have a 16 9 dmd screen you can split it and use it for both dmd and topper.

    Hi my name is Barry and I'm a virtual pinball addict.

Viewing 20 posts - 1 through 20 (of 217 total)