Forum Replies Created
October 6, 2019 at 10:39 pm #147156
Hey all, I’ve read the thread & I cant seem to get my DMD to work properly. I saw something about the sizing but I cant get it to work on mine.
I have 10.6 final and I have PinUp installed, all other pinup tables are fine, just the DMD on this one is too large. Am I to take it from above that this is a known issue or can it be fixed with current config’s?
I have a 3 screen cab and single DMD for the DMD screen.
Thanks, otherwise it looks great.
You need to login in order to like this post: click hereAugust 16, 2019 at 6:31 pm #142028
Ok, Ive fought my 4k upgrade for too long now. this is crazy good. Thanks team, awesome work
You need to login in order to like this post: click hereMarch 23, 2019 at 11:56 pm #119419
Thanks @thalamus, I was struggling to make shots today from the left flipper and lo and behold the solenoids were set to 1. Quick change to 2 seems to have done the trick and now my flips are at around 2 ms instead of 16.
I love your work at https://vpinball.com/wiki/visual-pinball-knowledge-base/fastflip-tables-and-info/
Awesome table, get the coloured DMD if you have a chance, perfect complement to this wonderful table.
You need to login in order to like this post: click hereMarch 9, 2019 at 6:46 pm #117304
I had the compile error in later BETA’s, I took Bord’s advice and reverted back to 3592. It seems to be rock solid now. Perhaps that advice may be a suggestion for more of those with later BETA’s issues, go back to 3592 and try. Thanks Bord for the advice and thanks authors for the great table.
You need to login in order to like this post: click hereMarch 7, 2019 at 2:52 am #117002
hi guys, I seem to be having similar issues since the update to 2.1 with the compile error. I was loading through the editor, not front end and cant get 2.1 to run at all.
I tried to go back to 2.0 and now this will not run, same compile error.
I am on Beta 3653 which was pretty good for the other tables, some display errors under preferences, but gameplay was rock solid, no crashes.
My system is Win 10, latest updates, i5 4590, 16 GB Ram, Z87-A motherboard, GTX 970OC 4GB playing on FHD cab with 3 monitors.
Is there a ‘more stable’ beta version or is it random across versions at present?
This is helluva table, gorgeous as shit, I’m sure it’ll all come together at some point, so until then if anyone has any suggestions, maybe on trying a different beta or something I can switch off or on in preferences, I got nothing and I’m outta ideas.
Still an awesome table though.
EDIT – So I started troubleshooting and saw something about a POV file. Deleted it and it started. Sorry flupper. So it couldnt be that easy, and it wasnt, next time up, no dice. This is a strange one.
You need to login in order to like this post: click hereMarch 4, 2019 at 2:40 am #116394
And the touches like Uncle Fester are just a t-h-i-n-g (see what I did there) of beauty.
You need to login in order to like this post: click hereMarch 4, 2019 at 1:11 am #116385March 2, 2019 at 11:21 pm #116142
Thanks Terry for the work on this. Made my life very easy today now my cab is finally working properly.
You need to login in order to like this post: click hereMarch 1, 2019 at 5:50 pm #115956
HI all, sorry to be ‘that guy’ but I did check through the thread and I couldn’t see if anyone had been kind enough to share a pov for cabinet. Thanks all.
You need to login in order to like this post: click hereMarch 1, 2019 at 5:11 pm #115952February 21, 2019 at 6:40 pm #114983February 21, 2019 at 4:14 am #114900
ckpin, thank you so much, great table and the whole family loves it.
Two questions – Have you heard of anyone who doesn’t have a topper in their cabinet displaying the topper video vertically on the right hand side of the playfield? I have renamed the topper video folder in the PuP pack, and this seems to have had no ill effects, but I hope this wont throw off anything for multiball?
The other, with the latest 10.6 Beta 3639, I notice that if I open the table just through the editor, the playfield image stays over the top of everything when I close the table, this can only be fixed by reboot, no refresh etc. Has this been noticed? Plays & closes fine through front end, I was just trying to access the script to look for a possible topper remedy.
Thanks again for the wonderful table.
You need to login in order to like this post: click hereJanuary 15, 2019 at 3:40 am #109629
This may be the same as Thalamus, I get no errors, but I also get no DMD display. I am using the 3 screen DMD backglass version. I use an LCD display on freezy’s 1.71 for DMD.
Otherwise table plays fine. Looks great too.
You need to login in order to like this post: click here
1 user thanked author for this post.December 3, 2018 at 4:54 am #105599
To be honest this is like trying to choose a favourite ice cream flavour, so many choices. randr has hit it out of the park with his first 3 choices. Like Terry I would love to see some SLAM tables now I don’t think that would happen but if I had to choose, Aliens Legacy…Assholes and elbows ladies!!!!! Whatever randr chooses will be awesome I’m sure.
You need to login in order to like this post: click hereDecember 1, 2018 at 6:52 pm #105414October 7, 2018 at 4:05 am #100536
No worries, thanks Thalamus. Really nice improvements to the table so far, excited to see the end result.
You need to login in order to like this post: click hereOctober 7, 2018 at 1:31 am #100533
Thanks guys, I had no problem the first time I played with the backglass but subsequent times it has not loaded.
I have tried the patch and seems to be working again. Not sure why it would change, but it did. Great fun table.
You need to login in order to like this post: click hereOctober 7, 2018 at 1:12 am #100532
Great stuff everyone. Awesome table. I’ve only noticed one issue that I can replicate, on the new beta, from the right hand flipper I have lost balls up the JAWS ramp, where they have left the ramp to the left and become lost underneath the light on the left that shines up on the shark. I have not altered the table in any way (no changes to X, Y, Z settings and playing in a cabinet, not desktop). Otherwise this is a really awesome, really fun table.
You need to login in order to like this post: click hereOctober 7, 2018 at 1:06 am #100531
This is really excellent and a pinball that I was really happy to see made, because the only way to feel the noise is when it’s good and loud!!!!!
You need to login in order to like this post: click hereOctober 7, 2018 at 12:58 am #100530