outhere

Make sure your vbs files are only in the Scripts folder not the tables folder

Make sure you have the latest software installed

http://vpuniverse.com/forums/files/file/4236-sambuild/
https://www.vpforums.org/index.php?app=downloads&showfile=11572
https://www.vpforums.org/index.php?app=downloads&showfile=12553

Diner VPX 1.2.vpx.zip

https://vpinball.com/VPBdownloads/diner-vpx/

Diner (L-4) – ROM

https://www.vpforums.org/index.php?app=downloads&showfile=948

As soon as I put my cab back together I will check that out

Just put the video in the “C:PinballXMediaVisual PinballReal DMD Color Videos” folder

That’s what I figured – so that’s where I have them

Their mp4 videos

How did you get your videos to play in pinballx on a REAL DMD?

The only thing it will play for me is the default – no DMD video

Grander Unified-er DOF R3++

https://www.vpforums.org/index.php?showtopic=39557&hl=

Try the menu

Load the game press END on the keyboard after the DMD goes to coin door open…
Then press number 8 if you keep pressing it it will give you four different menus when you’re on a menu press the number 0 and you should get another menu on your playing field screen

I am so looking forward to have this one in VP it is one of the few FP tables on my Cabinet

Will it be a 4 player?

Looking good – The game that is

After putting the grounds together the same results….

Then the new power supply showed up same results

Then I tried the DC Motor Speed Control but that works a little different than a H-bridge

It turns out The signal 0 to 5 volt Is a positive voltage So what I did is use the H bridge to control the DC motor speed controller And That worked…[Read more]

3 Screen set-up

https://www.vpforums.org/index.php?showtopic=33272&page=7#entry346276

Wow Nice set of tables

Try changing the color and download new files

https://vpinball.com/VPBdownloads/terryreds-ffmpeg-video-converter-scripts/

dmddevice.ini inside vpinmame

Can you put grounds together from different power supplies?

Yes I am using a ATX computer supply but I have a power supply I will try…

But that still doesn’t explain if I don’t use the H-bridge the shaker motor runs at full speed….

Thanks for your help

The new H bridge showed up – same Results… I have them wired exactly like the pictures you Showed me..

Would this controller work with the LEDwiz?

https://www.amazon.com/DROK-Control-Controller-Regulator-Support/dp/B015F88D32/ref=sr_1_40?ie=UTF8&qid=1534036944&sr=8-40&keywords=board+regulator

If so how do you think it should be…[Read more]

Thanks – on order – We will see if they work for me

It would appear I bought the same shaker motor set up that you did….

On your motor did you leave the capacitor on their?

TerryRed – Do you happen to have a link to To the H-bridge That you bought?

Because the H-bridge I bought is not cooperating

When I don’t use the H-bridge the motor gets 12 V and pulling 3.2 amps –> Very fast

When I use the H-bridge it’s only getting about 8 V and pulling about 2.0 amps

This H-bridge is a maximum of 2 amps…  So I wonder if it’s regulating…. It will not let me use more than 2 amps

Maybe TerryRed will charm in and give me a link to where he…[Read more]