Forum Replies Created
-
AuthorPosts
-
Make sure your vbs files are only in the Scripts folder not the tables folder
Make sure you have the latest software installed
http://vpuniverse.com/forums/files/file/4236-sambuild/
https://www.vpforums.org/index.php?app=downloads&showfile=11572
https://www.vpforums.org/index.php?app=downloads&showfile=12553You need to login in order to like this post: click here
Diner VPX 1.2.vpx.zip
https://vpinball.com/VPBdownloads/diner-vpx/
Diner (L-4) – ROM
https://www.vpforums.org/index.php?app=downloads&showfile=948
You need to login in order to like this post: click here
As soon as I put my cab back together I will check that out
You need to login in order to like this post: click here
Just put the video in the “C:\PinballX\Media\Visual Pinball\Real DMD Color Videos” folder
That’s what I figured – so that’s where I have them
Their mp4 videos
You need to login in order to like this post: click here
How did you get your videos to play in pinballx on a REAL DMD?
The only thing it will play for me is the default – no DMD video
You need to login in order to like this post: click here
Grander Unified-er DOF R3++
https://www.vpforums.org/index.php?showtopic=39557&hl=
You need to login in order to like this post: click here
Try the menu
Load the game press END on the keyboard after the DMD goes to coin door open…
Then press number 8 if you keep pressing it it will give you four different menus when you’re on a menu press the number 0 and you should get another menu on your playing field screenYou need to login in order to like this post: click here
I am so looking forward to have this one in VP it is one of the few FP tables on my Cabinet
Will it be a 4 player?
Looking good – The game that is
You need to login in order to like this post: click here
After putting the grounds together the same results….
Then the new power supply showed up same results
Then I tried the DC Motor Speed Control but that works a little different than a H-bridge
It turns out The signal 0 to 5 volt Is a positive voltage So what I did is use the H bridge to control the DC motor speed controller And That worked pretty good but that required 2 items to do one job…
Then I thought I would try one of these and it turns out it’s working great.. — 4 Channel Optocoupler Isolation Module board
The wire that I soldered to the LEDwiz – what is that exactly doing?It’s obvious it’s bypassing something….
If I use that wire To control The 4 Channel Optocoupler Isolation Module board the shaker motor runs at full speed as soon as you turn the power On…
If I hook the board to the port Like you normally do it works fine…
You need to login in order to like this post: click here
3 Screen set-up
https://www.vpforums.org/index.php?showtopic=33272&page=7#entry346276
You need to login in order to like this post: click here
1 user thanked author for this post.
August 24, 2018 at 3:16 pm in reply to: Tales of the Arabian Nights (Williams 1996) Skitso's Detail MOD #96362Wow Nice set of tables
You need to login in order to like this post: click here
Try changing the color and download new files
You need to login in order to like this post: click here
https://vpinball.com/VPBdownloads/terryreds-ffmpeg-video-converter-scripts/
You need to login in order to like this post: click here
dmddevice.ini inside vpinmame
You need to login in order to like this post: click here
Can you put grounds together from different power supplies?
You need to login in order to like this post: click here
Yes I am using a ATX computer supply but I have a power supply I will try…
But that still doesn’t explain if I don’t use the H-bridge the shaker motor runs at full speed….
Thanks for your help
You need to login in order to like this post: click here
The new H bridge showed up – same Results… I have them wired exactly like the pictures you Showed me..
Would this controller work with the LEDwiz?
If so how do you think it should be wired?
You need to login in order to like this post: click here
Thanks – on order – We will see if they work for me
You need to login in order to like this post: click here
It would appear I bought the same shaker motor set up that you did….
On your motor did you leave the capacitor on their?
TerryRed – Do you happen to have a link to To the H-bridge That you bought?
Because the H-bridge I bought is not cooperating
You need to login in order to like this post: click here
When I don’t use the H-bridge the motor gets 12 V and pulling 3.2 amps –> Very fast
When I use the H-bridge it’s only getting about 8 V and pulling about 2.0 amps
This H-bridge is a maximum of 2 amps… So I wonder if it’s regulating…. It will not let me use more than 2 amps
Maybe TerryRed will charm in and give me a link to where he bought his…
You have 2 ledwiz’s? – Yes
You need to login in order to like this post: click here
-
AuthorPosts