outhere

tommyducati67 wrote:
i just checked my cab file and its the same as yours with the address not sure why when i copied pasted it here it shows those incorrect characters .. only thing i had to change is the last ring that you corrected in red …
so teensy has 2 files an alpha and a beta .. when i tried to upload them then using the arduino to v…

[Read more]

izzybrexx wrote:
anyone have issues with the ball not coming out?..game coins up and starts but ball never comes out.

@izzybrexx  —  No the table works Great  — Thank you Tom
UpDates – https://www.vpforums.org/index.php?showtopic=4982#entry330264

tommyducati67 wrote:
I see now that its the cabinet address some funky stuff happened ..question what would cause the address to change like that ?

Post Video

Read this post everything you need to know is in there or a link to get you going
https://www.vpforums.org/index.php?showtopic=38170&p=381730

Make sure you start doing back ups
You can only use the ones on the list  — http://pinball.weilenmann.net/docu/DirectOutputWIP/toy_builtin.html#use_DirectOutput_Cab_Toys_Hardware_LedStrip
@tommyducati67   —   Take a look at the areas marked in Red those are the lines I fixed

<?xml version=”1.0″?>
<Cabinet xmlns:xs…[Read more]

@tommyducati67 — Try this  –  it should work

<?xml version="1.0"?>
<Cabinet xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" x…[Read more]

@tommyducati67
Are you sure you pasted your Cabinet file correctly

Why is this towards the bottom of your cabinet file

Global Config

<?xml version=”1.0″ encoding=”utf-8″?>
<!–Global configuration for the DirectOutput framework.–>
<!–Saved by DirectOutput Version 3.1.7011.27968: 2020-10-18 14-02-48–>

Friffy1 wrote:
I’d love to give this a go, but I’m finding the ROM impossible to find. Any ideas?
Tom
@friffy1

http://vpuniverse.com/forums/files/file/5583-cue-prototype/

RegalBegal wrote:
I’m running a cabinet with three screens and DOF. VBS files are installed properly. Yes, I followed the PinEvent faq. BAM is current. Yes, other PinEvent tables work fine. The last version of DSA that worked for me was 1.04 DOFLinx MX. I had problems with non PinEvent ESB 1.06, couldn’t get DOF to work in that one. Thanks aga…

[Read more]

Mihos wrote:
Fun table!

I had to update just about everything, which I needed to do anyway.

I do have a weird issue where sometimes my DMD doesn’t show up and I have to restart the table…. but that happens with all my FP tables using pupdmd. (using a pindmdv3). It is only a mild annoyance since everything works fine after that.
@mihos

Post you…[Read more]

Thank you for all your hard (Enjoyable) work
I have no doubt this update will be fantastic
Hopefully I will have time to try it out tomorrow

Screens should be set to 100% in windows But
I do this so I can Run windows at 125%

thefritz01 wrote:
I have a few VPX tables that have the 4 player score boxes typically shown on the backglass or DMD display duplicating on the playfield. The Simpsons Data East 1990 table is an example of this. How do I remove these from the playfield? Example below. This happens when I launch directly through VPX or Popper. Any Ideas of what I…

[Read more]

FlexDMD version works good – Thanks

Everything works more correct when all screens are set at 100% scaling in windows
Of try this

Erzak wrote:
Two questions:

1) can the DMD be moved? I assume there is no coding as of yet to put it on an actual DMD.
2) all of the sounds and effects are playing thru “Table” so for those of us with separate backglass speakers, need to re-assign where they are playing. I’m going to start with moving anything that doesn’t have ‘fx’ in the name…

[Read more]

yrplace18 wrote:
Got it . But why does the game not quit when I double click “Q” like it should ? Will try the game again today….. Holding start and adding two credits didn’t let the game start either BTW

Try clicking on the playfield with the mouse if the game works then you’re losing focus

yrplace18 wrote:
is the game working for anyone ? It loads but won’t start. F3 doesn’t reset the game and I had to shutdown and restart my VPIN because I couldn’t close the game

F3 only works on games that use a Rom
Game works fine for me

rgarriott wrote:
5700 Sapphire gpu