PixelJunkie

starcommand79 wrote:
I’m noticing when I nudge, it changes the brightness of the table. Any ideas?

You can disable the LUT change functionality in the table script.  Set it to 1.  By default it’s set to 0 and mapped to the MagnaSave buttons in VPX.  You might be using the same buttons for nudge too.

Umpa wrote:
Pixeljunkie- I have the same issue. Did you find a fix? I have tried a few things but no luck yet.

I’ve not been able to fix this yet.  I also posted this in a thread on the Popper Facebook group.  This is what I tried and more details on an error I tracked down in the Windows Event Viewer…

I downloaded the reduced PupPack (…[Read more]

I kind of solved the problem.  I turned off G-sync on my Nvidia graphics card and turned on Vsync in the Nvidia control panel.

Then I set VPX to run in exclusive full screen, and set the refresh rate to be locked at 60Hz.

I’d love to run non PupPack tables at 144hz, and run these Pup Pack tables at 60Hz, but I haven’t found a way to switch reso…[Read more]

I did fix this.  In my case, I was dealing with a new build, and my audio was being directed to another audio source in the background.  Even selecting the correct device in VPX didn’t fix it for me.  Ultimately, I had to go into device manager and under my list of audio sources, disable the HDMI ports appearing there (under audio, not the vi…[Read more]

I managed to lower the Leprechaun voice by editing the script.  Do a find and replace for 100,1 and replace it with calloutvol,1 .  You’ll see a bunch of places in the script where the volume level is hard coded to 100.  Replace it with the variable name and then it will use the value that you set the variable to in the top of the script.

Fantastic work!  I downloaded and installed the updated PinEvent and tables and followed the guide for my cabinet.  One thing I ran into was for RetroFlair and Jaws, which both have multiple zips for the Pup Packs… in addition to removing the final .zip extension, I had to remove the numeric prefix (e.g. 1591511203_) that vpinball adds to the f…[Read more]

LOL!  I’m literally staring at the FAQ in another tab after I swear I read the entire thing and see this…

On all the PUPDMD displays, the words are followed by numbers, like this: “TerryRed|255” or “John Carpenter|78341″…

you aren’t properly updated to Pinup Player 1.44 or higher

I will confirm in the morning if that fixes it.  I’m pretty su…[Read more]

Terry, hope you or someone can help me here with this one.  I’ve got everything working well, and followed your instructions and guides which are spot on and extremely thorough.  When I run the table (and I’m running Option 2, which is to display the DMD on a 16×9 screen), the text in the DMD has numbers after the normal text that is to be d…[Read more]

Thanks for this!  Probably saved me hours.  I have a MSI 570 MB and had the same issue with the Nahimic driver.  Uninstalled it, and everything started running ok.

Finally figured it out.  I had tried everything listed in the Wiki, installed Equalizer APO, copied the center channel to L/R, etc.  In a fit of desperation, I went into Device Manager in Win 10, and disabled every other audio output device that was not my Realtek Speakers / Headphones device.  I had 3 other devices listed, which included an HD…[Read more]

I tried the suggestions in the guides to adjust the volume, but it does not make a difference.  And it seems to just be this table (or I guess more specifically the ROM maybe).  I am using the default rom set in the script of the table (taf_l7) if that makes a difference.  I’ve also uninstalled and reinstalled vpinmame (3.3) and tried do…[Read more]

Total noob at Virtual Pinball and I assume I am overlooking something simple here, but I can’t get TAF to play anything other than mechanical sounds (flippers, coin, etc.)  Music and voice for this table do not come through, but they work just fine for other tables.

I’ve tried deleting the NVRAM, the cfg file, verified I have the correct ROM,…[Read more]