VPINBALL Downloads (3752)
Showing 2811-2820 of 3752
-
VPX installer 10.4.0
All-in-one (almost) installer (VPX10.4.0, VP9.9.5, VP9.9PM5(updated Plunger/Accel/Surround MOD), VP9.2.1, VP8, VPM3.0, DMDext, X/UltraDMD, B2S, DX9webinstaller, Core.vbs scripts). Open the zip, run the .exe, enjoy. Read More -
The Walking Dead TWD Mod
First, this is a mod of Dozers TWD Table, all Gredits goes to him. I can not make Tables on my own but I can do a littleĀ graphic stuff. So this is my way to give somthing back to this great Community Hope your enjoy Read More -
Avatar (PuP-Pack, VPX, BG, No Topper)
Avatar PinUp Player Pack (BackGlass Only) System: Ā Visual Pinball Player (version 10.4+) All Video, Media and Artwork by Xkane47 PuP-Pack Editor & PuPCapture files by Nailbuster Fan trailer by Imakefilmtrailers (youtube) Video preview: https://www.youtube.com/watch?v=1LCykrJ1whc Requirements: PinUP Player v1.30 or greater VPX: Ā Designed to work with Avatar mod 1.12 ROM: Ā Designed to work with āavr_200ā. Ā May work with other versions. DMD Colors: Ā R=255 G=88 B=32 Installation: Ensure there are no files in your PUPVideosavr_200 folder (if that folder already exists). Copy the PuP-Pack (avr_200) folder into your PUPVideos folder. (example: C:Visual PinballTablesPinUpPlayerPUPVideosavr_200). Background Videos: Backglass: Ā Enabled by default Topper Ā Ā : Ā Disabled (note background settings are configurable by using PinUPPackEditor.exe) Installation Notes: The Backglass has a default setting to enable a looping Background Backglass video. Ā You can remove your existing Avatar.directb2s file as it is not needed. (and wonāt be seen while using this PuP-Pack) This PuP-Pack is designed for people without Toppers. Ā There is a different PuP-Pack available for users with Toppers. Ā To ensure this PuP-Pack show videos properly you must ensure your āOther 1ā screen in PinUp Player Displays is configured to match same size/location as your standard BackGlass. This PuP-Pack does not require a modded Visual Pinball table to work. Ā No table script modifications are required. Ā It should work with any Avatar vpx table that uses rom avr_200. Ā Tested with Avatar table mod 1.12. Troubleshooting: Visit: http://vpinball.com/forums/forum/visual-pinball-forums/pinup-player-interactive-video-plugin/ Read More -
Avatar (PuP-Pack, VPX, BG, TOP)
Avatar PinUp Player Pack (BackGlass, Topper) System: Ā Visual Pinball Player (version 10.4+) All Video, Media and Artwork by xkane47, PuP-Pack Editor & PuPCapture files by Nailbuster, Fan trailer by Imakefilmtrailers (youtube) Video preview: https://www.youtube.com/watch?v=1LCykrJ1whc Requirements: PinUP Player v1.20 or greater VPX: Ā Designed to work with Avatar mod 1.12 ROM: Ā Designed to work with āavr_200ā. Ā May work with other versions. DMD Colors: Ā R=255 G=88 B=32 Installation: Ensure there are no files in your PUPVideosavr_200 folder (if that folder already exists). Copy the PuP-Pack (avr_200) folder into your PUPVideos folder. (example: C:Visual PinballTablesPinUpPlayerPUPVideosavr_200). Background Videos: Backglass: Ā Enabled by default Topper Ā Ā : Ā Enabled by default (note background settings are configurable by using PinUPPackEditor.exe) Installation Notes: The Backglass has a default setting to enable a looping Background Backglass video. Ā You can remove your existing Avatar.directb2s file as it is not needed. (and wonāt be seen while using this PuP-Pack) The Topper has a default setting to enable a looping Background Topper Video. Ā If you are using your own Topper Video (through Pinball X) you should either disable the Topper Background video (using PinUPPackEditor), or replace it with your own video. This PuP-Pack is designed for people with Backglass and Toppers. Ā There is a different PuP-Pack available for users without Toppers. This PuP-Pack does not require a modded Visual Pinball table to work. Ā No table script modifications are required. Ā It should work with any Avatar vpx table that uses rom avr_200. Ā Tested with Avatar table mod 1.12. Troubleshooting: Visit: http://vpinball.com/forums/forum/visual-pinball-forums/pinup-player-interactive-video-plugin/ Read More -
VP 10.5 Beta
Yet another fresh beta build ;) -
Blackout (Williams 1980) S34 mod
Big thank you once again to 32assassin for letting me mod this masterpiece! He is the guy who did all the hard work on the original table. GtxJoe added a fantasy mode to the blackout sequence on the original table. Blackout achievement only lasts a few seconds, Ā You can change it so that blackout lasts until the ball in play drains change the setting in at the top of the script. Read More -
Road Runner (Atari 1979) SoundMOD v1.1
I first would like to thank Kalavera for giving me permission to make this sound mod. I would also like to thank him for making a great table!! I also would like to thank TAB which let Kalavera use his VP9 table to make his VPX mod. I would also like to thank Arngrim for adding DOF to script for Kalavera. There is much more important info on original download page. They put in alot of time and work on the original table, and it is appreciated!! So if you like this mod, I would encourage you to thank the original author of the table, as I have only made a few changes! Original Table... http://vpinball.com/VPBdownloads/road-runner/ I also would like to thank Flupper for his great Flasher resource table!! I would also like to thank Thalamus for telling me how to use resource tables!! I also would like to thank Allknowing2012 and Gtxjoe for teaching me how to add timers to script! I also would like to thank DJRobX, STAT, Gtxjoe, and nFozzy, for helping me shorten my StopSounds and PlaySounds script commands. (They each wrote out an example, and between them all, I was able to figure it out!! BIG THANKS!!!) I would also like to thank DJRobX for showing me example of flasher script command for flasher placement in FS mode. I also would like to thank Steve "Slydog43" for which these VPX mods would not be possible!! Version 1.1 Thanks to Vogliadicane's info I changed to his Ball Image, and set ambient (keep this low) from 29,29,29 to 0,0,0. So the ball should look more natural. HUGE THANKS FOR THIS INFO VOGLIADICANE!!!! Version 1.0 Lowered Rubber Physics hit height to 27. Changed DT view settings, changed X Scale to 1, changed Y Scale to 1, Changed Z Offset to -140 Changed FS view settings, changed X Scale to 1, changed Y Scale to 1, and other settings. Adjusted many objects so outer lines and edges were straightened. Plastics, sidewood, apron, side top and bottom rails, plungerplastic, etc. Raised height of bumpercaps to 61, so lines are not showing through. Raised height of halo on bumper lights so the whole bumper is covered with light when activated. Added 6 modified wheel image pics to upper blank strip in FS view, which can be toggled with Left Magna-Save button. (This wouldn't work with STAT's script as is, so had to modify, as you can't change pics on flashers, but you can make them visible or not, so I added 3 different flashers to same area, and just made the others not visible while viewing current. If you try adding pic to upper area with ramp or wall, it pushes the table offscreen, but when pics are done with flashers, it doesn't effect the table or push it off screen!!) Added modified version of STAT's Change team script, so 14 different bumper pics can be toggled with Right Magna-Save button. The second bumper pic toggled, is a white version of same bumper, which is as I saw it on IPDB. Added BIP variable and "plungerreleasefree" sound effect to plunger, played when ball is not in plunger lane. Added invisible wall above drain so ball doesn't jump up onto apron when draining fast. Added Keypress of N for shutting off Mod Sounds. Added Keypress of M for turning on Mod Sounds. Mod Sounds are on by default, but can be shut off on Line 16 of table script by changing "SoundMod = 1" to "SoundMod = 0" Added 25 sound effects, 5 of which are different versions of same 60's cartoon theme song. All pics, trademarks, Logos and sounds belong to their respectful owners. This table is for personal home, and non-commercial use only. This table should be used for educational purposes only.. Hope you enjoy!! Read More -
Jive Time (Williams 1970)
It's official and it's only on vpinball.com.Ā The first ever released version of Jive Time on visual pinball (to my knowledge). I'm very pleased with this build.Ā It was a ton fun putting together and I really feel like the look and feel and game play (physics) are true to the real table.Ā I tried to simulate the actual mechanical behavior of the machine and I'm very happy with the end result. Options (at the top of the script): Balls per game: set to 3, 5 (default), or 10 West gate: 0 - keeps gate open until end of ball, 1 - will close when award is scored (default) Restore game: 0 - will begin in game over at restart, 1 - remembers where you left off and will resume on restart (default) Chimes:Ā 0 - DOF chimes disabled (default), 1 - DOF chimes enabled This table uses two bells.Ā The sounds were pulled from the actual machine and they are somewhat unique to this table, chimes don't feel right This download contains everything you should need.Ā FSS, FS, DT, POV, B2S, and media.Ā There are two backglasses, one with a border to help make the spinner wheel a little more proportional on a wide screen. For those that haven't tried FSS yet, I encourage you to try at least one game of this table in FSS mode.Ā Turn your screen to portrait, click the FSS box, then click the Test Desktop box.Ā While I will mostly play this on my cab, the FSS version is by far my favorite.Ā I feel like I'm sitting in front of the machine.Ā Check out the EM Reels and spinner (same as desktop). Credits: Playfield: rothbauerw (redraw/clean-up), bord (stitch, and very well done!) Backglass: rothbauerw B2S: rothbauerw, STAT, randr Primitives: bord, 32assassin, kiwi, acronovum Misc: borgdog, loserman, randr, acronovum Read More -
Hyperball Wheel (Hi-res)
Today i took some time to look up some rare tables. Hyperball got my attention... cool name and i like the logo design. So i downloaded the VPX table, but got dissapointed searching for a nice wheel. I recreated the logo. Kept this one simple and sleek Enjoy! Read More -
Viper Wheel
A saw that JP Salas released a VPX table of Viper today... couldn't find a wheel to match it.Ā So i figured a quick last minute PS action for this year would be nice... Have a good day and Happy New Year everybody! Enjoy! Read More
« Previous
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 Next »

