Latest version is playing great Daryl. Cheers! I’d still like to figure out how to remove that white keyline on the apron though. I’ve updated a couple of aprons in the past and used a feathered selection. This normally gives a nice smooth edge and no keyline like I’m seeing here?
I took your image and placed in on a black backdrop to see and get as much of the white off as I could.. I could cut back more I suppose.
I don’t think it’s part of the image. The original feathered edge should be fine. I think it’s a lighting issue.
I did a test where I dropped the height of the apron quite low (too low to use as some other parts were then rendered above it) and the keyline effect was all but gone. There was just a little of it in the middle, so this is why I think it’s lighting.
Here’s a sample with it on black… https://dl.dropboxusercontent.com/u/8504136/Pinball/kiss-apron_OnBlack.jpg The highlight edge on the angles is meant to be there to give it a slight impression of rolled form (depth), but as you can see in the middle and down the right hand side, there is no keyline at all.
Once installed however, the keyline the appears in these blank areas (as well as effecting the highlight edge on the angles).
You need to login in order to like this post: click here
