- This topic has 2 replies, 2 voices, and was last updated 5 years, 2 months ago by
.
-
Posts
-
I have read through so many different forums and tutorials trying to get this to work… but I need to ask for help at this point. So far I have got everything working great but the leds (solenoids, contactors, beacons, ssf all working great). Right now I am just trying to get the undercab led’s working… then I will move on to installing the play field leds. As far as I can tell I have all of my config files setup correctly but when I load a table the lights will turn on but the 2 strips will just turn a solid color and not animate at all… the 1st strip (right side) will turn yellowish and the second will turn red, and this is the same for any table I try. I read on some posts that people had success with bridging pin 15 and 16 together on the teensy but when I try that the led’s won’t turn on at all. I have attached all of my config files… any help would be greatly appreciated!
You need to login in order to like this post: click here
Post the DirectOutput.log file
You need to login in order to like this post: click here
Here is the log file
You need to login in order to like this post: click here
Forums are currently locked.
