- This topic has 12 replies, 2 voices, and was last updated 3 years, 10 months ago by outhere.
-
AuthorPosts
-
December 28, 2018 at 2:13 pm #107910
Hello!
I have setup a few PUP packs and they are displaying properly on my 2nd monitor. When I try a regular backglass (directb2s) file, it loads but underneath my table on the first monitor. I opened B2S_Setup and set it to the 2nd monitor but it never goes there.
Any idea why this might be?
Thanks!
You need to login in order to like this post: click here
December 28, 2018 at 3:56 pm #107926Sure – read the other thread where you asked the same.
You need to login in order to like this post: click here
December 28, 2018 at 4:03 pm #107927These are different issues. The other thread is about pup files not displaying correctly because of backglass. This one is about blackglass (no pup files at all) not displaying on the 2nd monitor. From what I’ve read, backglass will display over pup files, but this doesn’t appear to be the case for me. My pup files are working great on my second monitor but the non pup pack tables the backglass is not going to the second monitor.
Thank you
You need to login in order to like this post: click here
December 29, 2018 at 12:46 pm #107976Here are the settings, but they will not go to monitor 2.
You need to login in order to like this post: click here
December 30, 2018 at 6:57 pm #108111For those interested and for those that may have this problem in the future…
I solved this problem by changing the settings to monitor 1 even though in Windows monitor 1 is the TV that is the playfield. For some reason B2S have the screen named wrong.
You need to login in order to like this post: click here
December 30, 2018 at 9:51 pm #108124Yes. Windows does not always name the screens correctly. But usually will start with screen 0 as the main screen amd then go from there. Also if you update video drivers you have to reboot before it will display correctly.
You need to login in order to like this post: click here
June 9, 2020 at 4:38 pm #185121Man I wish I would have seen this thread. Cause everything I tried wouldnt work. If they werent Pup Pack tables it wouldnt play right. I am now in the process of a factory restore. Ugh
You need to login in order to like this post: click here
June 9, 2020 at 4:58 pm #1851262 and 3 Screen set-up — https://vpinball.com/forums/topic/3-screen-set-up-and-more/
You need to login in order to like this post: click here
1 user thanked author for this post.
June 9, 2020 at 5:18 pm #185127Some of it’s kinda outdated. My PinDMD3 has never shown up as a monitor. I got lucky also mine shipped with 1014 firmware :)
You need to login in order to like this post: click here
June 9, 2020 at 5:59 pm #185134Outhere,
By any chance is your graphics card NVIDIA?
You need to login in order to like this post: click here
June 9, 2020 at 7:00 pm #185145Some of it’s kinda outdated. ——- What are you referring to when you say this
By any chance is your graphics card NVIDIA? ——– Yes
My PinDMD3 has never shown up as a monitor. ——- As far as I know it never willYou need to login in order to like this post: click here
June 9, 2020 at 7:07 pm #185147Some of those links have 2016 dates. Thats all. Do you have GeForce Experience and the NVIDIA control panel installed? Im kinda hesitant because I installed those, day 1 everything played real well. Turned it off, went to sleep and work, came home nothing would display corectly except for Pinup Popper, Pup Pack tables, and Pinball FX3. The restore just finished and Im installing everything again.
You need to login in order to like this post: click here
June 9, 2020 at 7:22 pm #185150GeForce Experience
Do you have GeForce Experience installed? — Not sure what this is
NVIDIA control panel installed? — Â yes the control panel which controls all the settings for the video cardYou need to login in order to like this post: click here
-
AuthorPosts
Forums are currently locked.