- This topic has 39 replies, 8 voices, and was last updated 4 years ago by outhere.
-
AuthorPosts
-
December 12, 2019 at 4:22 pm #154232
I have a bit of a problem with B2S. I have over 200 tables on my cab working fine and decided to start adding back glass images. Nothing shows up on the back screen and yes i tried different numbers on that screen.I also have a couple more pc’s that i copied the visual pinball folder on a flash drive on to them and both pc’s showed the B2S just fine.I struggled with this for quite a while and decided to reinstall windows 10 on my cab.Now i get B2S error object reference not set to an instance of an object on all tables. The b2s are named correctly as they work on the other pc’s. I am at a loss here and just might swap out pc’s with my cab but this is nagging me and would like to figure this out. The cab pc is a I7 with a 1080 video card and a very good system. One of the other one has a 2080 card and other one has a 1660 so they are all are good enough for this. Any help would be appreiaciated.
Thanks, TomYou need to login in order to like this post: click here
December 12, 2019 at 8:29 pm #154275Did you register B2S.sever? right click B2SBackglassServerRegisterApp and choose run as admin to make sure it actually runs. file is in your tables folder
********************************************************
Messing with the VPinball app and push notifications.
So if you haven't downloaded app yet what are you waiting for!?
for IOS and Android********************************************************
You need to login in order to like this post: click here
1 user thanked author for this post.
December 13, 2019 at 7:46 am #154310Yes i did that many times but no luck.
ThanksYou need to login in order to like this post: click here
December 13, 2019 at 9:11 am #154316Did you install with the one-in-all installer ? If not. Maybe try a re-install ? db2s needs .net – maybe you don’t have the required version or something related ?
You need to login in order to like this post: click here
December 13, 2019 at 10:21 am #154318Yeah try re installing all in one
https://vpinball.com/VPBdownloads/vpx-installer-10-6-0/
********************************************************
Messing with the VPinball app and push notifications.
So if you haven't downloaded app yet what are you waiting for!?
for IOS and Android********************************************************
You need to login in order to like this post: click here
December 13, 2019 at 7:13 pm #154348Yep, i tried all of that. Just will live without b2s for now.
You need to login in order to like this post: click here
1 user thanked author for this post.
December 15, 2019 at 6:55 am #154506Could it be the b2s screen res is not correct?
You need to login in order to like this post: click here
December 15, 2019 at 8:16 am #154510If you hit alt + tab can you see the backglass? The backglass May be running behind the playfield on screen 1.
https://vpinball.com/forums/topic/fixed-monitors-assignment-wrong-in-vpx/
Something in here may help
You need to login in order to like this post: click here
December 15, 2019 at 12:19 pm #154532Could it be the b2s screen res is not correct?
This would be my guess. It’s probably running but located in some un-viewable space on the desktop.
I know so little about everything that I could tell you all there is to know about nothing
You need to login in order to like this post: click here
December 16, 2019 at 8:08 am #154650The problem is i am getting the error and not letting back glass load.
You need to login in order to like this post: click here
December 16, 2019 at 9:23 am #154652Show us your screenres.txt and take a snap of one table with db2s from the file-manager, so we can be very sure that your naming isn’t a problem.
You need to login in order to like this post: click here
December 16, 2019 at 12:09 pm #1546561080
1280
1024
3
0
0
0
0
0
0
0I also noticed a difference in the b2s server option screen on one machine that works and my cab pc that does not.
On the working one the top line reads authentic and other one is grayed out. I hit the locate VP,xml button but could not find it, could that be a problem?
Where could i get that xml file?
I dont think naming is a problem, same files on both machines.You need to login in order to like this post: click here
December 16, 2019 at 12:20 pm #154657That file doesn’t look correct. Here is an old post with info on each parameter :
1366 <– Playfild screen X resolution (width)
768 <– playfield screen Y resolution (height)
1280 <– Backglass screen X resolution (width)
1024 <– Backglass screen Y resolution(height)
2 <– Display number for the backglass
0 <– offset for the backglass on the selected display (normally left at 0)
0 <– offset for the backglass on the selected display (normally left at 0)
600 <– Width of the DMD area in pixls
200 <– Height of the DMD area in pixels
1280 <– X position of the DMD area relative to the upper left corner of the backglass screen
100 <– Y position of the DMD area relative to the upper left corner of the backglass screen
0 <– Y-flip, flips the LED display uppside down. Used in P2K style cabs.Now db2s server can have even more parameters, but, well, first – fix the obvious problem of the second monitor having a x of 1024 and a y of 3. Be also very sure that the monitors are aligned properly under video options.
You need to login in order to like this post: click here
December 16, 2019 at 12:22 pm #154662You should have at least 12 lines
2 and 3 Screen set-up and more
https://vpinball.com/forums/topic/3-screen-set-up-and-more/You need to login in order to like this post: click here
December 16, 2019 at 12:30 pm #154663Did not help. I am still getting the b2s object reference error. Isnt that the main problem?
You need to login in order to like this post: click here
December 16, 2019 at 12:33 pm #154664I do not get that error on the working machine with 1920 x 1080 monitors with same screen txt.
The txt with all the zeros.
Flash and GB-LE are the only ones that work.
You need to login in order to like this post: click here
December 16, 2019 at 12:56 pm #154667Maybe something in here will help
https://www.vpforums.org/index.php?showtopic=4982#entry330264You need to login in order to like this post: click here
December 16, 2019 at 2:44 pm #154670And you are sure that the table and db2s is named exactly the same ? You see. Quite recently, there was a change in the db2s server. If you installed from the bottom up you will now be using a server that does not do fuzzy matching the same way as it used to be. So, in theory, you could be having two different db2s servers on those computers and one will be a bitch about the filenames, and the other is not. It only required the 8 first characters to be correct. That is also why I asked you to do a screenshot of explorer. And. No matter how you look at it. Your screenres file is wrong, if you haven’t corrected it by now.
You need to login in order to like this post: click here
December 17, 2019 at 9:14 am #154722Working on getting that for you, thanks for your help.
You need to login in order to like this post: click here
December 17, 2019 at 9:22 am #154723This is my new error.
You need to login in order to like this post: click here
-
AuthorPosts
Forums are currently locked.