Bone Busters

[32assassin]

So I got the dumb idea of giving this table the 10.5 rebuild

https://www.vpforums.org/index.php?app=downloads&showfile=11579

the more I looked at it the more I realized it needed a full rebuild given that Hmuek still used VP8-VP9 build  techniques to build this table.

using walls as guide wires, using ramps as plastics ect,  and the table does not have authentic lighting.

 

I download a manual but the manual I got is missing multiple pages.

it does have this

https://www.dropbox.com/s/gc3vacfleib6mss/light%20IDs.png?dl=0

I never seen one of this tables in the wild and I never played the Virtual Version

thankfully I was able to find this picture

https://pinside.com/pinball/forum/topic/bone-busters/page/2

after going through both images and watching multiple videos

red = GI  (a guess in my part)

pink = always on (a guess in my part)

Blue = Aux Board 1

Yellow = Aux Board 2

( the douche-bags at farsight combined the two aux boards in their version but according to a few videos  Aux board 2 only lights up when captive ball hit shot is requested)

the Aux Boards are fully coded to a timer that can be enabled and disabled via the script.  I still don’t know what controls them because that page of the manual was missing from the manual I download.

 

 

but the question as always

Does anyone have any resources to finish this table

I was able to recover (steal) allot of the ramp decal from this site

http://www.pbresource.com/pfplayf.htm

by the looks of it its what the Future Pinball author used.  I”m still missing more than a few.

all the primitives are done for this table, I just need to do the plastics

 

 

 

 

 

 

see a table you like help me find the resources so that I can finish it
https://www.dropbox.com/sh/7qtake9whi5ium2/AAB4K4W78oMVlqSxTzKtGHTHa?dl=0

Attachments:

1. 

   bb.png
   

see a table you like help me find the resources so that I can finish it
https://www.dropbox.com/sh/7qtake9whi5ium2/AAB4K4W78oMVlqSxTzKtGHTHa?dl=0

You need to login in order to like this post: click here

2 users thanked author for this post.

FlippingSweet, TheBourneID2

[randr]

tough table for resources maybe someone has some! lets hope.

thanks 32 for your continued work on these 

********************************************************
Messing with the VPinball app and push notifications.
So if you haven't downloaded app yet what are you waiting for!?
for IOS and Android

********************************************************

********************************************************
Messing with the VPinball app and push notifications.
So if you haven't downloaded app yet what are you waiting for!?
for IOS and Android

********************************************************

You need to login in order to like this post: click here

[Thalamus]

Played the existing vpx game only yesterday. Thought it played better than I remembered. Doesn’t mean I would love to see a improved version. Unfortunately. No clue to where to get more resources for this one.

You need to login in order to like this post: click here

[chucky87]

Hello

I attacked the original db2s of bone busters I still have the animation of the lights but I have a problem I can not find the assignment of the backglass lights with the playfield that can help me find the numbers to assign

thank you

 

You need to login in order to like this post: click here

[chucky87]

hello 33 assassin your table is no longer available. why did you stop the wip? Is it possible to recover it?

thanks to you

You need to login in order to like this post: click here

[32assassin]

the file was removed because I needed the storage space.

see my sig.

If anyone has resources,  I will be more then happy to finish the table.

 

not sure you would want it its missing multiple plastics. and no I don’t plan to add any of the VP9 plastics

I made primitive toys for the Left and Right ramp. and I need clean decal images so that I can add them to the primitive textures.

the VP9 images are not up to quality standards.

 

 

see a table you like help me find the resources so that I can finish it
https://www.dropbox.com/sh/7qtake9whi5ium2/AAB4K4W78oMVlqSxTzKtGHTHa?dl=0

see a table you like help me find the resources so that I can finish it
https://www.dropbox.com/sh/7qtake9whi5ium2/AAB4K4W78oMVlqSxTzKtGHTHa?dl=0

You need to login in order to like this post: click here

[Tom]

@32Assassin, I have had extremely good luck going on pinside and emailing owners of the game and asking for images or scans.  I send out 10 emails and usually I get 3 back with good resources.  Plastics should be easy to get off them.  Hell for Party Animal, I found a guy with a disassembled cap and got hi res pics of the back wall that I never dreamed of getting.

You need to login in order to like this post: click here

[Tom]

I contacted a guy on pinside and he has an extra set of plastics and decals that he is scanning and sending me this week.  fingers crossed

You need to login in order to like this post: click here

[Tom]

Here you go @32Assassin.  He scanned them in at 300 dpi, hope that’s good enough.   Thanks to Arcadevideo from Calgary, AB over at pinside

 

Attachments:

1. Bone-Busters-Plastics.zip

You need to login in order to like this post: click here

[32assassin]

nice 300  DPI is more then good enough

see a table you like help me find the resources so that I can finish it
https://www.dropbox.com/sh/7qtake9whi5ium2/AAB4K4W78oMVlqSxTzKtGHTHa?dl=0

see a table you like help me find the resources so that I can finish it
https://www.dropbox.com/sh/7qtake9whi5ium2/AAB4K4W78oMVlqSxTzKtGHTHa?dl=0

You need to login in order to like this post: click here

[Thalamus]

Another great pinsider to the rescue. Love it. Now, lets hope any of the owners of Earthshaker would chime in.

You need to login in order to like this post: click here

[sheltemke]

Thalamus wrote:

Another great pinsider to the rescue. Love it. Now, lets hope any of the owners of Earthshaker would chime in.

We know exactly what missing for earthshaker ? Just plastics or playfield scan or anything else? That’s a must for VPX.

 

Amazing job on Bone Busters plastics Tom :) Fantastic community here, love it.

You need to login in order to like this post: click here

[Tom]

Let me know about earthshaker and I will start asking around

You need to login in order to like this post: click here

[32assassin]

I got a PM from someone yesterday that might provide 1200 DPI  scans.

but its from a friends table so everything needs to fall in place in order to get them.

if you can find some;  the more the options to choose from will not be a problem.

 

one day of work and all the Major toys are pretty much done.

1 decal is still missing from the left ramp

1 plastic is still missing from the Right Toy

 

 

see a table you like help me find the resources so that I can finish it
https://www.dropbox.com/sh/7qtake9whi5ium2/AAB4K4W78oMVlqSxTzKtGHTHa?dl=0

see a table you like help me find the resources so that I can finish it
https://www.dropbox.com/sh/7qtake9whi5ium2/AAB4K4W78oMVlqSxTzKtGHTHa?dl=0

You need to login in order to like this post: click here

[Tom]

Can you post a pic of the missing decals and plastic and I can ask him about it

You need to login in order to like this post: click here

1 user thanked author for this post.

makmak

[32assassin]

 

Left Ramp Decal

 

plastic on Right Toy

 

this is also missing

 

allot to ask but ask him if he is willing to do Bone Busters  1-800-Busters.

the vertical plastic by the plunger exit

the current scan is very blurry

see a table you like help me find the resources so that I can finish it
https://www.dropbox.com/sh/7qtake9whi5ium2/AAB4K4W78oMVlqSxTzKtGHTHa?dl=0

see a table you like help me find the resources so that I can finish it
https://www.dropbox.com/sh/7qtake9whi5ium2/AAB4K4W78oMVlqSxTzKtGHTHa?dl=0

You need to login in order to like this post: click here

[Tom]

Working on it

You need to login in order to like this post: click here

1 user thanked author for this post.

Mlager8

[Tom]

haven’t heard back yet, I did some work on this one, let me know what you think

 

You need to login in order to like this post: click here

[Tom]

I just sent a request to scan the plastic next to the flipper.

what is missing from this pic? The green plastic or does it have an image on it?

You need to login in order to like this post: click here

[Tom]

best I could get was a pic of this one

so I cleaned it up and removed the nuts, great resolution

 

 

 

 

You need to login in order to like this post: click here

2 users thanked author for this post.

FlippingSweet, bord

[Author]

Posts