Help with cabinet config file for DOF

[Tom]

Its been a while since i setup my DOF on my cab and i cant remember how to create a cabinet config file.  My buddy Ron doesnt have any lights but he wants to be able to push his plunger in to use the ZB ball lanch.  He only has a KL25z and a lplunger pot.  Can anyone help us out with making a Cabinet config file, thanks

You need to login in order to like this post: click here

[Tom]

Anyone have just a kl25z and dof setup?

You need to login in order to like this post: click here

[Thalamus]

I have Zeb’s plunger, and are able to push for full plunge. Are you sure that this can be done on just a kl25z ? I won’t be able to help you and I’ve never created a cabinet.xml.

You need to login in order to like this post: click here

[outhere]

Tom wrote:

Anyone have just a kl25z and dof setup?

Is this what you are looking for — http://mjrnet.org/pinscape/BuildGuideV2/BuildGuide.php?custom=EU&expver=R3.201602xx&sid=zblaunch

You need to login in order to like this post: click here

[Tom]

so that doesn’t work on a kl25z with pinscape?  Damn, ok

You need to login in order to like this post: click here

[outhere]

Tom wrote:

so that doesn’t work on a kl25z with pinscape? Damn, ok

@armyaviation

He has a setup like this – https://www.vpforums.org/index.php?showtopic=36108&page=2#entry413506

You need to login in order to like this post: click here

[Tom]

Yes a kl25z and a linear pit.  The plunger is working fine but in the pinscape manual it says you can bump it forward, you need to setup dof and set port 1 to ZB launch.  I setup Dof r3 but can’t remember how to do the cab config file.  I have a led wiz and a kl25z or else I could use mine as reference

You need to login in order to like this post: click here

[outhere]

Tom wrote:

Yes a kl25z and a linear pit. The plunger is working fine but in the pinscape manual it says you can bump it forward, you need to setup dof and set port 1 to ZB launch. I setup Dof r3 but can’t remember how to do the cab config file. I have a led wiz and a kl25z or else I could use mine as reference

As far as i know you will not need a cabinet file to do that

You need to login in order to like this post: click here

[Tom]

I can’t get it working.

You need to login in order to like this post: click here

[outhere]

Tom wrote:

I can’t get it working.

You used this DOF  – https://www.vpforums.org/index.php?showtopic=39557&hl=
I personally have not used it
When I did it I put a switch at the end of the plunger because I Didn’t realize this option was available
I will disconnect my switch an attempt to set this up and see How it works

You need to login in order to like this post: click here

1 user thanked author for this post.

RONR

[Tom]

Dof R3, that would be great thanks

You need to login in order to like this post: click here

[outhere]

Tom wrote:

Dof R3, that would be great thanks

Works perfect
I used the PinscapeConfigTool.zip – http://mjrnet.org/pinscape/BuildGuideV2/BuildGuide.php?custom=EU&expver=R3.201602xx&sid=kl25zSoftwareSetup
I follow the directions here – http://mjrnet.org/pinscape/BuildGuideV2/BuildGuide.php?custom=EU&expver=R3.201602xx&sid=zblaunch

You need to login in order to like this post: click here

1 user thanked author for this post.

Tom

[Tom]

@outhere, that was they key.  Thank you so much for the help, Ron and I appreciate it

You need to login in order to like this post: click here

[RONR]

I also want to thank @outhere for his post on fixing my plunger setup. Tom has been very helpful and has given up hours getting me setup and your post has finally got us where I’m up and running. Thanks again. Ron

 

 

 

 

 

You need to login in order to like this post: click here

1 user thanked author for this post.

Tom

[Author]

Posts