Cabinet hardward Pinscape + X360 Controller Emulator?

[Lupin]

Hello all,

Hope this is correct place to ask this question.

Using Pinscape V2 for nudge, plunger and fllpper setup. Working fine.

But easy way to map into FX3 & The Pinball Arcade use x360ce.exe (X360 Controller Emulator).

Only problem is nudge. X360 Controller Emulator showing values changing but 1G setting on Pinscape not sensitive to show much movement on X360 Controller Emulator config.

Can anyone suggest way to make Pinscape or X360 Controller Emulator more sensitive?

You need to login in order to like this post: click here

[Badazzwi]

I put many hours in trying to get x360ce working with FX3 properly with little success.  I reccomend using doflinx for plunger and nudge in FX3.

Hi my name is Barry and I'm a virtual pinball addict.

You need to login in order to like this post: click here

1 user thanked author for this post.

KrakenByte

[Lupin]

doflinx can accept input from Pinscape software?

You need to login in order to like this post: click here

[Everly]

Lupin wrote:

doflinx can accept input from Pinscape software?

I have my cabinet set up exactly the way you are after.  I have found that using the x360ce program for my plunger works perfectly, but I modified my doflinx.ini file to take care of the nudge commands and it works well.  Below is the forum post from vpforums that details how to perform that function.

https://www.vpforums.org/index.php?showtopic=42325

 

You need to login in order to like this post: click here

1 user thanked author for this post.

KrakenByte

[Lupin]

 

Will be trying this idea:

https://steamcommunity.com/app/442120/discussions/0/1609400247633447897/

 

You need to login in order to like this post: click here

[Author]

Posts