Currently, there are 0 users and 0 guests visiting this topic.
Viewing 20 posts - 1 through 20 (of 104 total)
  • Author
    Posts
  • #189732
    Goldchicco
    Participant
    @goldchicco

    VPX Conversion by: Goldchicco & 32assassin

    Graphic Details by Mussinger

    This release is the result of a great team work and we are aware that is a great start point.

    Table is ready for SSF Users.

    Special Thanks to those two amazing people (I am so grateful for working with you):

    32assassin for helping me with this conversion and for sharing his passion, knowledge and time.

    Frank Hollinger for redrawing  the playfield, the apron, the plastics and much much more.

    Thank you to:

    85Vett  for the VP9 version and for giving the OK to proceed with this project.

    DJLunchbox for creating a dedicated ball with the Corvette logo on it and two mods of the original apron with gold or chrome Corvette logo on it that you can find in the Image Manager.

    My appreciation to:

    Steve Burian for testing the table next to his original one and for giving me precious information about it.

    Todd Reynolds for knowing this table very well and send me precious tips about game play.

    This table took a great amount of time and we worked with you in mind... so please leave constructive feedback or comments in the support topic and will try to make it better.

    Permission to Mod:  you must ask / get permission first.

    All Logos, Copyrights and Trademarks are property of their respective owners.

    PROVIDED STRICTLY FOR PERSONAL / HOME USE AND NOT FOR COMMERCIAL SALE / RE-SALE OR DISTRIBUTION!

    Total of 87 users thanked author for this post. Here are last 20 listed.
    #189740
    Goldchicco
    Participant
    @goldchicco

    If you want to try the any of the optional aprons, please follow this directions:

    Select Layer 8 , Click on  Apron on the table editor, open Table\Image Manager then replace the image from the tab on the right (see picture)

    Attachments:
    1 user thanked author for this post.
    #189742
    NbayRx
    Participant
    @nbayrx

    Awesome. Thank you so much.

    Go VP Nation!

    1 user thanked author for this post.
    #189745
    vicviper
    Participant
    @vicviper

    thanks

    1 user thanked author for this post.
    #189747
    Major Frenchy
    Participant
    @steph

    Thank you very much guys for this great table.

    1 user thanked author for this post.
    #189749
    Pinbolt
    Participant
    @pinbolt
    Member

    Looks fantastic, thank you.

    1 user thanked author for this post.
    #189764
    trizonegb
    Participant
    @trizonegb

    this table is fantastic guys!! thanks a ton! phenomenal table!

    • This reply was modified 4 months, 4 weeks ago by trizonegb.
    1 user thanked author for this post.
    #189781
    Rastan350
    Participant
    @rastan350

    Looks great so far! Can this run with UseSolenoids=2 for FastFlips? I am assuming no since it wasn’t set. I did set it to 2 and didn’t get an error but I know that doesn’t always mean it will be smooth sailing in game :)

    Thanks,

    Nick

    • This reply was modified 4 months, 4 weeks ago by Rastan350.
    #189784
    flstclasic
    Participant
    @flstclasic
    Member

    Thank you Goldchicco! Can’t wait to try it out.

    1 user thanked author for this post.
    #189785
    Bladeof
    Participant
    @bladeof
    Member

    Thanks goldchicco and team for this table, your work is appreciated.

    #189793
    Tom
    Participant
    @armyaviation
    MemberContributor

    table looks great, very nicely done.  I started on this table but the PF image needed some work.  You guys did a great job.  I dont remember, was it Dark, that was doing a model of the engine for this table, did you use that?

    The only critique i see is that when the engine rocks the 2 screws on top dont move with it.  Other than that, im gonna put some serious play time in.  thanks again

    1 user thanked author for this post.
    #189794
    Onevox
    Participant
    @rooster
    Member

    Looks awesome. Thanks.

    Onevox

     

    1 user thanked author for this post.
    #189797
    Grimwar
    Participant
    @grimwar

    Very nice table, Thanks.

    1 user thanked author for this post.
    #189798
    Goldchicco
    Participant
    @goldchicco

    @Tom

    The  model of the Engine is still the same from 85Vett vp9 table, we did not found any sources out there

    #189799
    Tom
    Participant
    @armyaviation
    MemberContributor

    you may reach out to Dark, i believe it was him that was making one, whoever made the flintstones objects

    #189801
    Crakkers
    Participant
    @crakkers

    Thanks Goldchicco. Looking forward to playing this.

    1 user thanked author for this post.
    #189806
    sheltemke
    Participant
    @sheltemke
    Member

    Yesssssss! What a wonderful saturday morning. And the table is beautiful. Thank you so much! :)

    1 user thanked author for this post.
    #189808
    sheltemke
    Participant
    @sheltemke
    Member

    Okay played some what a fun table i will play this a lot. I never played Corvette not even the VP9 version what an amazing gameplay.

    I have only one question/problem. The Kickback. I not sure how it works it kick vertically as it should but it always go back. It feels like it hits a “wall”.

    You have to do a timed nudge or its not strong enough? Not sure how it works but i always loose the ball when it go to kickback.

    Maybe just not drunk my coffee yet lol.

     

    Edit:

    Okay i figured out. Maybe just my configuration(?) but Kickback was not strength enough for me to kick the ball to its place(on the middle left side of the table up from the left middle flipper) Solution was for me: Kickback “Release speed” set to 200 “Mech Strength” to 200

    Now works perfectly for me.

    Damn i have to change my saturday to play this more….this table pull you in and not release you. What a masterpiece.

    • This reply was modified 4 months, 4 weeks ago by sheltemke.
    • This reply was modified 4 months, 4 weeks ago by sheltemke.
    1 user thanked author for this post.
    #189815
    johnbymy
    Participant
    @johnbymy

    Joué sur VP9 pendant des heures, je suis ravis de la voir en VPX

    Génial !

    Merci beaucoup

    1 user thanked author for this post.
    #189818
    STAT
    Participant
    @stefanaustria
    MemberContributor

    What a surprise, thanks :good: … Apron Image Change could be also with a simple Variable Options in Script … FYI

Viewing 20 posts - 1 through 20 (of 104 total)
  • You must be logged in to reply to this topic.

©2020 VPinBall.com

Log in with your credentials

or    

Forgot your details?

Create Account

The Vpinball app

FREE
VIEW