- This topic has 43 replies, 2 voices, and was last updated 4 years, 3 months ago by -RpT.
-
AuthorPosts
-
August 5, 2019 at 5:58 pm #140660
Error
line — 5 Flasher Outside Right
For The Leprechaun King Rom – leprechaun
We have
E106 Green/E162 Red f200/E148 Orange_red f200/E132|E119 Medium_sea_green/E175 Dark_violet f200/E176 Light_coral f200/ Yellow 400 8/E151 Blue f300 W160 L2
You need to login in order to like this post: click here
August 5, 2019 at 6:20 pm #140662Error
line — PF Back Effects MX
For (Time Fantasy Rom – tmfnt)
look for —Â ASS200
We have
L2|L20|L21 Dark_green L1 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/L8|L20|L21 Midnight_blue L2 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/L31 Blue L3 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/L32 Cyan L4 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/L33 Green L5 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/L34 Dark_magenta L6 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/S17 Gold 10 AT0 AL0 AH10 AW40 AS400 ADL L25/S17 Gold 10 AT0 AL60 AH10 AW40 AS400 ADR L25/S17 Gold 10 AT90 AL0 AH10 AW40 AS400 ADL L25/S17 Gold 10 AT90 AL60 AH10 AW40 AS400 ADR L25/S17 Gold 10 AT40 AL0 AH10 AW35 AS400 ADL L26/S17 Gold 10 AT40 AL65 AH10 AW35 AS400 ADR L26/S17 Gold 10 AT40 AL0 AH10 AW35 AS400 ADL L26/S17 Gold 10 AT40 AL65 AH10 AW35 AS400 ADR L26/S17 Gold 10 AL42 AW16 AT0 AH100 SHPCircle3 L2/S18 Gold 10 AT0 AL0 AH10 AW40 AS400 ADL L25/S18 Gold 10 AT0 AL60 AH10 AW40 AS400 ADR L25/S18 Gold 10 AT90 AL0 AH10 AW40 AS400 ADL L25/S18 Gold 10 AT90 AL60 AH10 AW40 AS400 ADR L25/S18 Gold 10 AT40 AL0 AH10 AW35 AS400 ADL L26/S18 Gold 10 AT40 AL65 AH10 AW35 AS400 ADR L26/S18 Gold 10 AT40 AL0 AH10 AW35 AS400 ADL L26/S18 Gold 10 AT40 AL65 AH10 AW35 AS400 ADR L26/S18 Gold 10 AL42 AW16 AT0 AH100 SHPCircle3 L2/S21 Gold 10 AT0 AL0 AH10 AW40 AS400 ADL L25/S21 Gold 10 AT0 AL60 AH10 AW40 AS400 ADR L25/S21 Gold 10 AT90 AL0 AH10 AW40 AS400 ADL L25/S21 Gold 10 AT90 AL60 AH10 AW40 AS400 ADR L25/S21 Gold 10 AT40 AL0 AH10 AW35 AS400 ADL L26/S21 Gold 10 AT40 AL65 AH10 AW35 AS400 ADR L26/S21 Gold 10 AT40 AL0 AH10 AW35 AS400 ADL L26/S21 Gold 10 AT40 AL65 AH10 AW35 AS400 ADR L26/S21 Gold 10 AL42 AW16 AT0 AH100 SHPCircle3 L2/S17 Green AH100 AL20 AT0 AW20 SHPCirclePulse/S18 Green AH100 AL40 AT0 AW20 SHPCirclePulse/S21 Green AH100 AL60 AT0 AW20 SHPCirclePulse/W39 Dark_red FD400 AL0 AW50 AH100 ADL AS300/W39 Dark_red FD400 AL50 AW50 AH100 ADR AS300/W39 Dark_red W200 FD400 AL0 AW50 AH100 ADL AS300/W39 Dark_red W200 FD400 AL50 AW50 AH100 ADR AS300/W39 White W300 AH100 AL0 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W39 White W150 AH100 AL20 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W39 White AH100 AL40 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W39 White W150 AH100 AL60 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W39 White W300 AH100 AL80 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W39 Dark_red L3 AT0/W39 Orange_red L4 AT0 AL0 AW50 BLINK F500 ASDL/W39 Orange_red L4 AT0 AL50 AW50 BLINK F500 ASDR/W39 White L1 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/W2 Red 1500 AH100 AL0 AW23 AT0 SHPRoundAndRound L19/W2 Red 1500 AH100 AL77 AW23 AT0 SHPRoundAndRound L19/W1 Red AH100 AL40 AT0 AW20 SHPRoundAndRound/W41|W7 Red L3 AT0/W41|W7 Red L4 AT0 AL0 AW50 BLINK F500 ASDL/W41|W7 Red L4 AT0 AL50 AW50 BLINK F500 ASDR/W39|W41|W7|W1|W2 Red AT0 AH15 AL0 AW100 ASDL ASS200 BLINK 490 BPW15 F50 L19/W39|W41|W7|W1|W2 Red AT85 AH15 AL0 AW100 ASDR ASS200 BLINK 490 BPW15 F50 L19/W16 Navy L11 AT0 AH20 F50 BLINK BPW10 ASDL/W16 White L12 AT0 AH20 F50 BLINK BPW10 ASDL W500/W16 Navy L11 AT80 AH20 F50 BLINK BPW10 ASDR/W16 White L12 AT80 AH20 F50 BLINK BPW10 ASDR W500/W16 White L13 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/W16Â Cyan AT0 AH15 AL0 AW100 ASDL ASS200 BLINK 490 BPW15 F50 L-19/W16Â Blue AT85 AH15 AL0 AW100 ASDR ASS200 BLINK 490 BPW15 F50 L-19/W16 Deep_pink AH100 AL40 AT0 AW20 SHPDiamondBoxPulse/W17 Dark_olive_green AH100 AL0 AW23 AT0 SHPRoundAndRound L19/W17 Dark_olive_green AH100 AL77 AW23 AT0 SHPRoundAndRound L19/W17 Aqua AH100 AL40 AT0 AW20 SHPPointPlop/W17 Blue_violet L13 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/W36 Amber FD400 AL0 AW50 AH100 ADL AS300/W36 Amber FD400 AL50 AW50 AH100 ADR AS300/W36 Amber W200 FD400 AL0 AW50 AH100 ADL AS300/W36 Amber W200 FD400 AL50 AW50 AH100 ADR AS300/W36 Red W300 AH100 AL0 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W36 Red W150 AH100 AL20 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W36 Red AH100 AL40 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W36 Red W150 AH100 AL60 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W36 Red W300 AH100 AL80 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W29 Light_steel_blue AH100 AL0 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500 W200/W29 Light_steel_blue AH100 AL20 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500 W150/W29 Light_steel_blue AH100 AL40 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500 W100/W29 Light_steel_blue AH100 AL60 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500 W50/W29 Light_steel_blue AH100 AL80 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500/W42 Blue_violet AH100 AL0 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500/W42 Blue_violet AH100 AL20 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500 W50/W42 Blue_violet AH100 AL40 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500 W100/W42 Blue_violet AH100 AL60 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500 W150/W42 Blue_violet AH100 AL80 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500 W200
You need to login in order to like this post: click here
1 user thanked author for this post.
August 7, 2019 at 11:08 am #140952@outhere as discussed in PM – HUGE thanks for troubleshooting this…. My matrix is currently down awaiting a new teensy, this will be the first thing i look into correcting once it’s up and running and your investigation is much appreciated hereÂ
You need to login in order to like this post: click here
August 13, 2019 at 9:36 am #141629I can confirm as per screenshots the first post of this thread the “ASS200” is part of the default template (you can search, see the default effect for the beacon MX effect as well as maybe a couple of others). Still don’t have a matrix working to be able to test (soon i hope) but i feel from what was said before by Outhere maybe this should be “AS200”.
I would be happy to test this once my matrix is running.
I am perplexed however (still) as to why it hasn’t errored for me or some others that have applied the lightshow, where others such as outhere experienced a crash or error. Likely a difference in terms of software or configuration but what this might be I don’t have the experience yet to say… I could make a bunch of guesses and check each one in turn but prehaps someone has a way of narrowing down the scope of the problem.
I am going to try making a simple profile using a fresh copy of the template, both with AS200 and ASS200 and then just set it so that matrix effect is the only thing on the profile. When triggered i would be interested in the difference in behaviour…Â
Let me know if you have any other thoughts or suggestions on this!
You need to login in order to like this post: click here
August 13, 2019 at 10:16 am #141639These 2 are written differently which one is correct
http://directoutput.github.io/DirectOutput/inifiles.html#inifiles_matrix
http://pinball.weilenmann.net/docu/DirectOutputWIP/inifiles.html#inifiles_matrix
You need to login in order to like this post: click here
August 13, 2019 at 10:52 am #141641I’ve been looking through Time Fantasy’s mx config that gets generated.
There are a bunch of double spaces where there should only be one space.
Also, I’ve seen lines like this:
W16Â Blue LAT85 AH15 AL0 AW100 ASDR ASS200 BLINK 490 BPW15 F50 L-19
which are a result of an extra space that will generate an L in its place, such as LAT85. Should be:
W16Â Blue AT85 AH15 AL0 AW100 ASDR ASS200 BLINK 490 BPW15 F50 L-19
So my guess is that you have a bunch of extra spaces where they shouldn’t be in your sheet, or if you used another program it created some unwanted spaces or characters.
@trojochel You still have the extra spaces in TLK config. Did you correct all the errors I pointed and resubmit? Your submission seems to not have corrections I mentioned to you.
You need to login in order to like this post: click here
1 user thanked author for this post.
August 13, 2019 at 10:55 am #141642These 2 are written differently which one is correct
http://directoutput.github.io/DirectOutput/inifiles.html#inifiles_matrix
http://pinball.weilenmann.net/docu/DirectOutputWIP/inifiles.html#inifiles_matrix
One is from DOF R2, the other is DOF R3. I think the ASS from R3 is correct…but my guess is that they both work. I don’t think this is the issue….as there are numerous things I’ve noticed….so he will need to correct the extra spaces for that and be sure there isn’t something else causing the issue.
AS an example…
E319 Red AT0 AH15 AL0 AW100 ASDL ASS200 BLINK 490 BPW15 F50 L19/E319 Red AT85 AH15 AL0 AW100 ASDR ASS200 BLINK 490 BPW15 F50 L19
is from my STSE….and ASS200 is used all throughout other configs
You need to login in order to like this post: click here
August 13, 2019 at 11:03 am #141643I can confirm as per screenshots the first post of this thread the “ASS200” is part of the default template (you can search, see the default effect for the beacon MX effect as well as maybe a couple of others). Still don’t have a matrix working to be able to test (soon i hope) but i feel from what was said before by Outhere maybe this should be “AS200”.
I would be happy to test this once my matrix is running.
I am perplexed however (still) as to why it hasn’t errored for me or some others that have applied the lightshow, where others such as outhere experienced a crash or error. Likely a difference in terms of software or configuration but what this might be I don’t have the experience yet to say… I could make a bunch of guesses and check each one in turn but prehaps someone has a way of narrowing down the scope of the problem.
I am going to try making a simple profile using a fresh copy of the template, both with AS200 and ASS200 and then just set it so that matrix effect is the only thing on the profile. When triggered i would be interested in the difference in behaviour…Â
Let me know if you have any other thoughts or suggestions on this!
“Errors” means that DOF will ignore them and not use that command. So a config will still operate…but not use everything.
The big thing you gotta watch are extra spaces. They are easy to miss….and they will still be extra spaces in DOF Config Tool…. buty they generate as an L sometimes.
Also… “special” hidden characters is a big issue. When copying and pasting from a web site or program…sometime formatting characters get thrown in…but you can’t see it in the Sheet or DOf Config Tool. You can only see it in notepad when you edit your *30.ini.
So if in doubt…check you file with notepad to try to see what shows up.
You need to login in order to like this post: click here
August 13, 2019 at 1:48 pm #141654the version of DOF might well be different… It has been quite a time since i tested this (aka where my matrix was working) so am going to need to start up again on the latest version once that’s fixed. I’ll check everything / remake it from scratch if needs be.
My process is more or less as per the tutorial with no extra software. Using both excel and openoffice depending on location but didn’t see any compatibility problems (did spot check the outputs for obvious errors likes spaces)… i used notepad++ in addition to placehold the lines going into the DOF .. had another quick look at some now, set styles and I didn’t see extra spaces anywhere on the version I attached to the video so I suspect this will be a hangover from a previous issue on the original sheet.
I wouldn’t have picked up on L-19 in the code (i see that now). I suppose it could also be a legit – has crept in as there are multiple layers in play.
Also did hours of playtesting and over many itterations before I committed so how I didn’t see errors is still a frustrating mystery! Maybe the version difference does account for that and I will see some when i can try again.
@TerryRed didn’t mean you to waste any time on looking into this anyway! Pretty sure the issue is somewhere on my original sheet, especially given what you have said… since the public version is reverted I’m more concerned with getting the cab back together in the next week or two. Then i will prioritize getting to the bottom of this one!You need to login in order to like this post: click here
August 13, 2019 at 2:17 pm #141658Opps
You need to login in order to like this post: click here
August 13, 2019 at 2:37 pm #141662Here is the error
line — PF Back Effects MX
For (Time Fantasy Rom – tmfnt)
look for — L-19
L2|L20|L21 Dark_green L1 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/L8|L20|L21 Midnight_blue L2 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/L31 Blue L3 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/L32 Cyan L4 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/L33 Green L5 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/L34 Dark_magenta L6 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/S17 Gold 10 AT0 AL0 AH10 AW40 AS400 ADL L25/S17 Gold 10 AT0 AL60 AH10 AW40 AS400 ADR L25/S17 Gold 10 AT90 AL0 AH10 AW40 AS400 ADL L25/S17 Gold 10 AT90 AL60 AH10 AW40 AS400 ADR L25/S17 Gold 10 AT40 AL0 AH10 AW35 AS400 ADL L26/S17 Gold 10 AT40 AL65 AH10 AW35 AS400 ADR L26/S17 Gold 10 AT40 AL0 AH10 AW35 AS400 ADL L26/S17 Gold 10 AT40 AL65 AH10 AW35 AS400 ADR L26/S17 Gold 10 AL42 AW16 AT0 AH100 SHPCircle3 L2/S18 Gold 10 AT0 AL0 AH10 AW40 AS400 ADL L25/S18 Gold 10 AT0 AL60 AH10 AW40 AS400 ADR L25/S18 Gold 10 AT90 AL0 AH10 AW40 AS400 ADL L25/S18 Gold 10 AT90 AL60 AH10 AW40 AS400 ADR L25/S18 Gold 10 AT40 AL0 AH10 AW35 AS400 ADL L26/S18 Gold 10 AT40 AL65 AH10 AW35 AS400 ADR L26/S18 Gold 10 AT40 AL0 AH10 AW35 AS400 ADL L26/S18 Gold 10 AT40 AL65 AH10 AW35 AS400 ADR L26/S18 Gold 10 AL42 AW16 AT0 AH100 SHPCircle3 L2/S21 Gold 10 AT0 AL0 AH10 AW40 AS400 ADL L25/S21 Gold 10 AT0 AL60 AH10 AW40 AS400 ADR L25/S21 Gold 10 AT90 AL0 AH10 AW40 AS400 ADL L25/S21 Gold 10 AT90 AL60 AH10 AW40 AS400 ADR L25/S21 Gold 10 AT40 AL0 AH10 AW35 AS400 ADL L26/S21 Gold 10 AT40 AL65 AH10 AW35 AS400 ADR L26/S21 Gold 10 AT40 AL0 AH10 AW35 AS400 ADL L26/S21 Gold 10 AT40 AL65 AH10 AW35 AS400 ADR L26/S21 Gold 10 AL42 AW16 AT0 AH100 SHPCircle3 L2/S17 Green AH100 AL20 AT0 AW20 SHPCirclePulse/S18 Green AH100 AL40 AT0 AW20 SHPCirclePulse/S21 Green AH100 AL60 AT0 AW20 SHPCirclePulse/W39 Dark_red FD400 AL0 AW50 AH100 ADL AS300/W39 Dark_red FD400 AL50 AW50 AH100 ADR AS300/W39 Dark_red W200 FD400 AL0 AW50 AH100 ADL AS300/W39 Dark_red W200 FD400 AL50 AW50 AH100 ADR AS300/W39 White W300 AH100 AL0 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W39 White W150 AH100 AL20 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W39 White AH100 AL40 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W39 White W150 AH100 AL60 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W39 White W300 AH100 AL80 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W39 Dark_red L3 AT0/W39 Orange_red L4 AT0 AL0 AW50 BLINK F500 ASDL/W39 Orange_red L4 AT0 AL50 AW50 BLINK F500 ASDR/W39 White L1 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/W2 Red 1500 AH100 AL0 AW23 AT0 SHPRoundAndRound L19/W2 Red 1500 AH100 AL77 AW23 AT0 SHPRoundAndRound L19/W1 Red AH100 AL40 AT0 AW20 SHPRoundAndRound/W41|W7 Red L3 AT0/W41|W7 Red L4 AT0 AL0 AW50 BLINK F500 ASDL/W41|W7 Red L4 AT0 AL50 AW50 BLINK F500 ASDR/W39|W41|W7|W1|W2 Red AT0 AH15 AL0 AW100 ASDL ASS200 BLINK 490 BPW15 F50 L19/W39|W41|W7|W1|W2 Red AT85 AH15 AL0 AW100 ASDR ASS200 BLINK 490 BPW15 F50 L19/W16 Navy L11 AT0 AH20 F50 BLINK BPW10 ASDL/W16 White L12 AT0 AH20 F50 BLINK BPW10 ASDL W500/W16 Navy L11 AT80 AH20 F50 BLINK BPW10 ASDR/W16 White L12 AT80 AH20 F50 BLINK BPW10 ASDR W500/W16 White L13 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/W16 Cyan AT0 AH15 AL0 AW100 ASDL ASS200 BLINK 490 BPW15 F50 L-19/W16 Blue AT85 AH15 AL0 AW100 ASDR ASS200 BLINK 490 BPW15 F50 L-19/W16 Deep_pink AH100 AL40 AT0 AW20 SHPDiamondBoxPulse/W17 Dark_olive_green AH100 AL0 AW23 AT0 SHPRoundAndRound L19/W17 Dark_olive_green AH100 AL77 AW23 AT0 SHPRoundAndRound L19/W17 Aqua AH100 AL40 AT0 AW20 SHPPointPlop/W17 Blue_violet L13 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/W36 Amber FD400 AL0 AW50 AH100 ADL AS300/W36 Amber FD400 AL50 AW50 AH100 ADR AS300/W36 Amber W200 FD400 AL0 AW50 AH100 ADL AS300/W36 Amber W200 FD400 AL50 AW50 AH100 ADR AS300/W36 Red W300 AH100 AL0 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W36 Red W150 AH100 AL20 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W36 Red AH100 AL40 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W36 Red W150 AH100 AL60 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W36 Red W300 AH100 AL80 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W29 Light_steel_blue AH100 AL0 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500 W200/W29 Light_steel_blue AH100 AL20 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500 W150/W29 Light_steel_blue AH100 AL40 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500 W100/W29 Light_steel_blue AH100 AL60 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500 W50/W29 Light_steel_blue AH100 AL80 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500/W42 Blue_violet AH100 AL0 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500/W42 Blue_violet AH100 AL20 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500 W50/W42 Blue_violet AH100 AL40 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500 W100/W42 Blue_violet AH100 AL60 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500 W150/W42 Blue_violet AH100 AL80 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500 W200
You need to login in order to like this post: click here
August 14, 2019 at 5:12 am #141708Hopefully that is the only one!
I will need to refer back to the orginal sheet however to confirm if this should actually be an “L19” (layer 19) or if this is a truncated line break as Terry suggested…
You need to login in order to like this post: click here
August 16, 2019 at 8:42 am #141898FYI – the L-19 was copied from the original effect (it’s there on your version of the spreadsheet for that effect i copied over to my Time Fantasy profile).
See row 47 on the MX lookups sheet. Beacon 2 effect.
Does this need to be corrected on your version (as i suspect at this stage) or do you feel the problem more nuanced in regards to my specific lightshow (as mentioned i will continue full testing once the hardware is available, just had a quick look at this again during lunch today).
Many thanks to you as always!Â
You need to login in order to like this post: click here
August 16, 2019 at 11:30 am #141965FYI – the L-19 was copied from the original effect (it’s there on your version of the spreadsheet for that effect i copied over to my Time Fantasy profile).
See row 47 on the MX lookups sheet. Beacon 2 effect.
Does this need to be corrected on your version (as i suspect at this stage) or do you feel the problem more nuanced in regards to my specific lightshow (as mentioned i will continue full testing once the hardware is available, just had a quick look at this again during lunch today).
Many thanks to you as always!Â
I’m at work…but the L-19 might be fine. It was used for other configs as well I think…not just any of mine. If not sure… just search your *30.ini to see where else its used.
You need to login in order to like this post: click here
September 11, 2019 at 6:50 am #144715Can someone confirm where this logs out to (posting on here for visibility)?
I was trying to take a look at this but can’t see the log file. c:\directoutput\directoutput.log is only being written to by DOFLINX not by normal DOF events. TIA.
You need to login in order to like this post: click here
September 11, 2019 at 10:17 am #144725Post your GlobalConfig_B2SServer file
You need to login in order to like this post: click here
September 11, 2019 at 12:35 pm #144737Attached! Thanks!
Nothing obviously wrong to me at a first glance… guess i should enter an absolute path under the <logfilepattern> ???
Or im simply not replicating the error in timefantasy since the logfile in the config folder that I have just now noticed wasn’t written to since last month…
You need to login in order to like this post: click here
September 11, 2019 at 12:36 pm #144738attach didn’t seem to work, heres the file:
<?xml version=”1.0″ encoding=”utf-8″?>
<!–Global configuration for the DirectOutput framework.–>
<!–Saved by DirectOutput Version 3.1.7011.27968: 2019-08-31 10-45-30–>
<GlobalConfig>
<LedWizDefaultMinCommandIntervalMs>10</LedWizDefaultMinCommandIntervalMs>
<LedControlMinimumEffectDurationMs>60</LedControlMinimumEffectDurationMs>
<LedControlMinimumRGBEffectDurationMs>120</LedControlMinimumRGBEffectDurationMs>
<PacLedDefaultMinCommandIntervalMs>10</PacLedDefaultMinCommandIntervalMs>
<IniFilesPath>C:\DirectOutput\config</IniFilesPath>
<CabinetConfigFilePattern>C:\DirectOutput\config\Cabinet.xml</CabinetConfigFilePattern>
<TableConfigFilePatterns />
<EnableLogging>true</EnableLogging>
<ClearLogOnSessionStart>true</ClearLogOnSessionStart>
<LogFilePattern>.\DirectOutput.log</LogFilePattern>
</GlobalConfig>You need to login in order to like this post: click here
September 11, 2019 at 12:58 pm #144739Try this
Change this line
<LogFilePattern>.\DirectOutput.log</LogFilePattern>
To.
<LogFilePattern>C:\DirectOutput\DirectOutput.log</LogFilePattern>
You need to login in order to like this post: click here
September 11, 2019 at 1:12 pm #144741Thanks, that works. In the end i give it a completely different filename to be sure that it gets created, i discovered it won’t however create a new folder which didn’t existÂ
Hoping to confirm the fix for timefantasy soon!
You need to login in order to like this post: click here
-
AuthorPosts
Forums are currently locked.