- This topic has 27 replies, 2 voices, and was last updated 4 years, 7 months ago by outhere.
-
AuthorPosts
-
September 20, 2019 at 5:24 pm #145660
You may have to turn everything off Or in your case if you can unplug the Tessie
You need to login in order to like this post: click here
September 20, 2019 at 5:27 pm #145661Ok, I tried medieval madness and did not have a thing. The teensy was flashing fast. The matrix cleared out from masters of the universe and not a thing just my dof toys.
You need to login in order to like this post: click here
September 20, 2019 at 6:11 pm #145664outhere. Now that I turned on the log would that show anything interesting to help this. we must be close. I tried the other teensy strip controller Hex files 1.01 and ended back with the newest. That did not change anything.
You need to login in order to like this post: click here
September 20, 2019 at 7:12 pm #145665I know some other people had problems when they only used one data wire – they ended up switching
And using a separate data wire for each set of lights so in your case you would use a total of 3 data Wires
You will need to change this part of the cabinet file
<NumberOfLedsStrip1>140</NumberOfLedsStrip1>
<NumberOfLedsStrip2>588</NumberOfLedsStrip2>
<NumberOfLedsStrip3>140</NumberOfLedsStrip3>
<NumberOfLedsStrip4>0</NumberOfLedsStrip4>
<NumberOfLedsStrip5>0</NumberOfLedsStrip5>
<NumberOfLedsStrip6>0</NumberOfLedsStrip6>
<NumberOfLedsStrip7>0</NumberOfLedsStrip7>
<NumberOfLedsStrip8>0</NumberOfLedsStrip8>You need to login in order to like this post: click here
September 20, 2019 at 7:25 pm #145674Do you know off the top of your head what colors I would use for the cat cable for the next two led strips. I believe I have orange now. Woud I have to change anything else in my xml or dof config. I can try this. I might try cutting my jumper cable first to see if this is an issue. I can always solder another on. Thanks again so much for your help. I could not have got this far without you. I had this all messed up. Hope I can get this squared away so I can think about putting it all together. Thanks Nathan
You need to login in order to like this post: click here
September 20, 2019 at 8:41 pm #145678Most people have to Jump 15 and 16
Would I have to change anything else in my xml <—Â No
https://www.vpforums.org/index.php?showtopic=36156
You need to login in order to like this post: click here
1 user thanked author for this post.
September 21, 2019 at 3:27 pm #145758Thank you so much outhere!! You were right. Too many leds for 1 data line. It works and is beutiful. I have to clean up the wireing. Just hooked it up to see. Will post some videos in my cabinet build when I get back. Thanks again for the patience. I did learn something! It looks great and I dont have the jumper on.
You need to login in order to like this post: click here
September 21, 2019 at 3:47 pm #145760Glad to see everything worked out
You need to login in order to like this post: click here
-
AuthorPosts
Forums are currently locked.