Currently, there are 0 users and 0 guests visiting this topic.
Viewing 20 posts - 1 through 20 (of 52 total)
  • Author
    Posts
  • #190265
    Goldchicco
    Participant
    @goldchicco

    VPX Conversion by: Goldchicco & 32assassin

    Apron by Mussinger

    Special Thanks to :

    32assassin for helping me with this conversion and for sharing his passion, knowledge and time.

    Frank Hollinger for redrawing the apron.

    Thank you to:

    Chinzman93 for the VP9 version and for giving the OK to proceed with this project.

    This table was realized with you in mind... so please leave constructive feedback or comments in the support topic and will try to make it better.

    Permission to Mod:  you must ask / get permission first.

    All Logos, Copyrights and Trademarks are property of their respective owners.

    PROVIDED STRICTLY FOR PERSONAL / HOME USE AND NOT FOR COMMERCIAL SALE / RE-SALE OR DISTRIBUTION!

    Total of 50 users thanked author for this post. Here are last 20 listed.
    #190269
    makmak
    Participant
    @makmak
    Member

    Screenshot looks real like crazy, cant wait to try! Thx for sharing your tremendous amount of work (not this table only)!

    2 users thanked author for this post.
    #190270
    Bendo
    Participant
    @bendo
    Member

    Cool, thanks a lot for all your hard work !!!

    1 user thanked author for this post.
    #190273
    Thalamus
    Moderator
    @thalamus
    ContributorMemberModerator

    Preview looks very nice guys. Thank you very much @goldchicco and @32assassin !

    Downloading now.

    1 user thanked author for this post.
    #190280
    Bladeof
    Participant
    @bladeof
    Member

    Looks very good, can’t wait to try it. Thanks to everyone involved.

    1 user thanked author for this post.
    #190284
    Badazzwi
    Participant
    @badazzwi
    Member

    Thank you goldchicco and 32a for bringing these gems to vpx. Thanks also to to the original authors and everyone else involved. I look forward to trying this out.

    Hi my name is Barry and I'm a virtual pinball addict.

    1 user thanked author for this post.
    #190285
    Thalamus
    Moderator
    @thalamus
    ContributorMemberModerator

    A small issue. Ball can get trapped between PegPlasticT020 and the bumper shown. Also, while shaking it loose I got points. So, the tilt switch doesn’t seem to be the correct one B-)

    Attachments:
    #190287
    TommyMc
    Participant
    @tommymc

    Thanks for your hard work

    1 user thanked author for this post.
    #190302
    Tom
    Participant
    @armyaviation
    MemberContributor

    I was going to build this table but I didn’t have a manual and good playfield images.  The table screenshot looks great.  We’re you able to locate the manual

    1 user thanked author for this post.
    #190304
    LTA
    Participant
    @luvthatapex
    Member

    wow I don’t remember playing this one back in the day. I saw a video about it too so we can compare! Your looks great, can’t wait to load it on the cab.

     

     

    1 user thanked author for this post.
    #190307
    Goldchicco
    Participant
    @goldchicco

    @Thalamus

    Good catch.

    Found out those three element were Toys and no Collidable: PegPlasticT020, PegMetalT024, PegMetalT025

    changed to Collidable and problem solved.

    tilt switch is actually sw15, I typed 14 by mistake.

    Uploading ver 1.1

    Attachments:
    #190311
    Goldchicco
    Participant
    @goldchicco

    @Tom

    https://www.ipdb.org/files/1079/Bally_1983_Grand_Slam_Manual.pdf

     

    #190312
    GuruChoc
    Participant
    @guruchoc
    Member

    Thanks a lot, one of my fav games from the Bowling Alley where I played as a kid, now to spell HOMER in the correct order again and again.

    G

     

    1 user thanked author for this post.
    #190316
    kds70
    Participant
    @kds70
    Member

    Thanks @guruchoc and JP for this nice table release; a lot of fun and looks nice. There are some solenoid calls not working for DOF.

    By the way i´ve identificated two of them at this time – those 2 bumpers are not working.

    So i was reading the grand slam schematics and the bumpers needs to be configured as shown here:

    Sub Bumper1_Hit: vpmTimer.PulseSw 13 : PlaySound SoundFX(“bumper1”,DOFContactors)

    Sub Bumper2_Hit: vpmTimer.PulseSw 14 : PlaySound SoundFX(“bumper2”,DOFContactors)

    Maybe more later; thanks for this table :rose:

    VPin: Williams Time Warp Cabinet (1979), 4K playfield: 40" Iiyama X4071UHSU, backglass: 32" LG. Pin2DMD, Pincontrol 1, LEDWiz, nudging, tilt, plunger, 10 big siemens contactors, Shaker, Strobo, Gear, Beacon, RGB Flasher 5x, Knocker, PC: Intel i5 2500k@4.5Ghz, 8 GB Ram, Zotac GTX 1070 Mini, Win10

    1 user thanked author for this post.
    #190321
    Goldchicco
    Participant
    @goldchicco

    @Kds70

    That bumpers solenoids call is already fixed in ver 1.1 – see picture attached.

    I’m glad you are thanking JP (great Author) and  GuruChoc but this conversion was made possible by Me and 32assassin.

    Hope you will enjoy the table

    Attachments:
    #190324
    kds70
    Participant
    @kds70
    Member

    I’m glad you are thanking JP (great Author) and GuruChoc but this conversion was made possible also by Me and 32assassin.

    :wacko: My mistake … too much “bumper solenoid thinking” attached in my head :mail: ;-)

    VPin: Williams Time Warp Cabinet (1979), 4K playfield: 40" Iiyama X4071UHSU, backglass: 32" LG. Pin2DMD, Pincontrol 1, LEDWiz, nudging, tilt, plunger, 10 big siemens contactors, Shaker, Strobo, Gear, Beacon, RGB Flasher 5x, Knocker, PC: Intel i5 2500k@4.5Ghz, 8 GB Ram, Zotac GTX 1070 Mini, Win10

    #190327
    outhere
    Moderator
    @outhere
    MemberContributorvipModerator

    Thanks for the nice VPX Version   – @goldchicco & @32assassin
    I was going to post about the bumpers but I see @kds70 beat me to it —  Thanks for the update also

    1 user thanked author for this post.
    #190328
    Goldchicco
    Participant
    @goldchicco

    @kd70 & @outhere

    All good, ver 1.1 fixed the bumpers calls

     

    #190330
    hotpepper
    Participant
    @hotpepper

    Very nice table! Thank you!

    1 user thanked author for this post.
    #190341
    Crakkers
    Participant
    @crakkers

    Thanks for another wonderful looking table guys. Much appreciated.

    1 user thanked author for this post.
Viewing 20 posts - 1 through 20 (of 52 total)
  • You must be logged in to reply to this topic.

©2021 VPinBall.com

Log in with your credentials

or    

Forgot your details?

Create Account

The Vpinball app

FREE
VIEW