Greetings from Niagara Falls Canada !

[UFOpinball]

This is fantastic and I’m pumped !  I am determined to build the ultimate Virtual Pin !

I need to say I was not a fan of these virtual Pins but about a month ago I stumbled on R&R computers on Youtube and was amazed by his Virtual Pin. So, I sold a number of my older pins, purchased a Monsterbash and now I want to add a Virtual Pin beside it. However… I am going to need some help on the computer, parts, programming end. I own and operate a Creative House with in house Silkscreen, Large Format, Digital printers and a CNC machine so I am ok with that part. I am hoping to get the help from this place. Looks like a good place of passion and respect. I was wondering where do I start? Should I get a computer first with the screens I will be using and set everything up that way?   Should I get an old cabinet or just cut one myself? Sooooooo many questions.

Eugene Artista

You need to login in order to like this post: click here

[Mlager8]

Guide to everything you need on building a cab:
http://mjrnet.org/pinscape/BuildGuideV2/BuildGuide.php

 

You dont HAVE to go with pinup popper as your front end… but its so damn nice and with the release of the all in one baller installer it couldn’t be easier, everything you need for software side:
https://www.nailbuster.com/wikipinup/doku.php?id=baller_installer

 

If you own a shop and can easily CNC your own cab and print art I don’t see why you’d even bother with stripping an old pin, just start fresh.

Enjoy!

You need to login in order to like this post: click here

1 user thanked author for this post.

UFOpinball

[UFOpinball]

This helps alot !  Thank You Mlager8 !

You need to login in order to like this post: click here

[UFOpinball]

Can you recommend a Computer Setup as far as Ram, Hardrive, Graphics Card etc?

I want to run the playfield at 4k for sure, then for the Back glass and I guess 2 DMDs below that or is it just 1?

You need to login in order to like this post: click here

[Author]

Posts